Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Arcing fault diagnosis using first peak arrival of EM radiation signal
View through CrossRef
Abstract
The objective of this study was to diagnose the arcing fault signals based on the first peak of arrival method using antenna to assess its use as potential arcing fault detection in power system network. Square patch antenna and circle patch antenna were employed for detection on artificial arcing in real environment. First peak of arcing signal arrival was measured through an analysis over a range of time and amplitude signals detected. For accurate results, Discrete Wavelet Transform (DWT) denoising technique was applied to the arcing signals detected as denoising tools. Analysis of first peak of signal arrival time and amplitude were carried out using MATLAB software to measure the changes in signals detected caused by di different placements of antenna. The results revealed that the first peak of signal arrival time, amplitude, type of antenna used and placement of the antenna around arcing source point all reflect the signals measurement.
Title: Arcing fault diagnosis using first peak arrival of EM radiation signal
Description:
Abstract
The objective of this study was to diagnose the arcing fault signals based on the first peak of arrival method using antenna to assess its use as potential arcing fault detection in power system network.
Square patch antenna and circle patch antenna were employed for detection on artificial arcing in real environment.
First peak of arcing signal arrival was measured through an analysis over a range of time and amplitude signals detected.
For accurate results, Discrete Wavelet Transform (DWT) denoising technique was applied to the arcing signals detected as denoising tools.
Analysis of first peak of signal arrival time and amplitude were carried out using MATLAB software to measure the changes in signals detected caused by di different placements of antenna.
The results revealed that the first peak of signal arrival time, amplitude, type of antenna used and placement of the antenna around arcing source point all reflect the signals measurement.
Related Results
Integration Techniques of Fault Detection and Isolation Using Interval Observers
Integration Techniques of Fault Detection and Isolation Using Interval Observers
An interval observer has been illustrated to be a suitable approach to detect and isolate faults affecting complex dynamical industrial systems.
Concerning fault detection, interv...
Deformational Processes Accommodating Slip on an Active Low-Angle Normal Fault, Suckling-Dayman Metamorphic Core Complex, Papua New Guinea
Deformational Processes Accommodating Slip on an Active Low-Angle Normal Fault, Suckling-Dayman Metamorphic Core Complex, Papua New Guinea
<p><b>Detachment faults that can be shown to have slipped at dips <30° in highly extended continental crust are referred to as “Low-Angle Normal Faults” (LANFs). The...
Decomposition and Evolution of Intracontinental Strike‐Slip Faults in Eastern Tibetan Plateau
Decomposition and Evolution of Intracontinental Strike‐Slip Faults in Eastern Tibetan Plateau
Abstract:Little attention had been paid to the intracontinental strike‐slip faults of the Tibetan Plateau. Since the discovery of the Longriba fault using re‐measured GPS data in 2...
Data-driven Fault Diagnosis for Cyber-Physical Systems
Data-driven Fault Diagnosis for Cyber-Physical Systems
The concept of Industry 4.0 uses cyber-physical systems and the Internet of Things to create "smart factories" that enable automated and connected production. However, the complex ...
Experimental Study of the Behaviour of Ring Main Unit-Type Panels in the Event of Internal Arcing in Different Compartments
Experimental Study of the Behaviour of Ring Main Unit-Type Panels in the Event of Internal Arcing in Different Compartments
If an R.M.U. (Ring Main Unit) cubicle is installed, operated and maintained in accordance with current standards and the manufacturer’s instructions, the likelihood of internal arc...
Late Quaternary Activity: Kouma Fault
Late Quaternary Activity: Kouma Fault
The Kouma Fault, located at the northern foot of the Mangshan Mountain in Luoyang City, Henan Province, China, is an active fault newly discovered in the field seismic geological s...
A Transient Fault-signal Extraction Scheme for Bearing Compound Fault Intelligent Diagnosis based on Vibration Signals
A Transient Fault-signal Extraction Scheme for Bearing Compound Fault Intelligent Diagnosis based on Vibration Signals
As a compound fault of bearing is characterized by complexity, disproportion, and interaction, its fault diagnostic accuracy tends to decline sharply. To solve this problem, the pr...
Analysis of the Influence of Fault Fracture Zone on Mining Response Based on FDM-DEM Coupling
Analysis of the Influence of Fault Fracture Zone on Mining Response Based on FDM-DEM Coupling
Fault slip will cause a change in mining stress at the longwall face, which will cause adverse effects. In this study, on the basis of Fast Lagrangian Analysis of Continua in 3 Dim...