Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

DESIGN OF BIOMASS FUEL AS ENERGY

View through CrossRef
Biomass waste from wood carpentry, which amounts to 15-20% of the woody biomass used, is still not fully utilized. Meanwhile, the biomass can be utilized as a renewable energy source derived from natural materials. The design of energy utilization from biomass waste as an alternative energy source for cooking is a simple utilization effort that can be done by the community. So on the stove design to utilize this waste wood chip biomass is done semi-closed combustion with a limited amount of air entry, so that the heat calorie fire stove that occurs will come out centrally on the hole above the stove. So the selected research topic is the way of utilization of wood chip waste biomass into alternative energy sources for cooking needs. The purpose of this research is to get the design of the utilization of biomass waste (wood chips) as an alternative energy source for cooking. The treatment in this study is the number of holes on the bottom plate of the stove, namely: A has 3 holes, B has 4 holes, C has 5 holes, and D has 6 holes. Based on the result of the analysis of variance (ANOVA), it is seen that the value of F- count is much bigger than the F-Table value either 5% or 1%, so Ho will be rejected and receive H1. This means that the treatment of the number of holes on the plate under the design of the biomass waste stove (wood chips) as a fuel gives a very real effect of its ability in the heat achievement to boil test water as much as 1 liter in the test pan. The treatment which gives effect and different from all other treatments is the D treatment with 6 holes on the bottom plate of the stove, which has a larger LSD value for 1%, but for the C treatment with 5 holes on the bottom plate of the stove is only different at the 5% level. While for treatment C to treatment A and B only differ on level of 5% only. The conclusion of this study is that the best stove design is D treatment, with a faster flame stabilized with a more perfect combustion process and leaving only a small amount of charcoal.
Title: DESIGN OF BIOMASS FUEL AS ENERGY
Description:
Biomass waste from wood carpentry, which amounts to 15-20% of the woody biomass used, is still not fully utilized.
Meanwhile, the biomass can be utilized as a renewable energy source derived from natural materials.
The design of energy utilization from biomass waste as an alternative energy source for cooking is a simple utilization effort that can be done by the community.
So on the stove design to utilize this waste wood chip biomass is done semi-closed combustion with a limited amount of air entry, so that the heat calorie fire stove that occurs will come out centrally on the hole above the stove.
So the selected research topic is the way of utilization of wood chip waste biomass into alternative energy sources for cooking needs.
The purpose of this research is to get the design of the utilization of biomass waste (wood chips) as an alternative energy source for cooking.
The treatment in this study is the number of holes on the bottom plate of the stove, namely: A has 3 holes, B has 4 holes, C has 5 holes, and D has 6 holes.
Based on the result of the analysis of variance (ANOVA), it is seen that the value of F- count is much bigger than the F-Table value either 5% or 1%, so Ho will be rejected and receive H1.
This means that the treatment of the number of holes on the plate under the design of the biomass waste stove (wood chips) as a fuel gives a very real effect of its ability in the heat achievement to boil test water as much as 1 liter in the test pan.
The treatment which gives effect and different from all other treatments is the D treatment with 6 holes on the bottom plate of the stove, which has a larger LSD value for 1%, but for the C treatment with 5 holes on the bottom plate of the stove is only different at the 5% level.
While for treatment C to treatment A and B only differ on level of 5% only.
The conclusion of this study is that the best stove design is D treatment, with a faster flame stabilized with a more perfect combustion process and leaving only a small amount of charcoal.

Related Results

Analisis Perbandingan Fuel Consumtption Pada Pesawat boeing B737-800 Rute CGK-DMK dan CGK-AMQ
Analisis Perbandingan Fuel Consumtption Pada Pesawat boeing B737-800 Rute CGK-DMK dan CGK-AMQ
Fuel consumption merupakan perhitungan konsumsi bahan bakaryang digunakan pesawat udara melalui dua engine, perhitungan ini akan mengetahui banyaknya fuel yang digunakan oleh pesaw...
Tofu is a food that contains protein and is made from soybean juice obtained through the fermentation process of soybeans. An increase in tofu consumption results in an increase in...
The Adventitious-Pin-Failure Study Under a Slow Power Ramp
The Adventitious-Pin-Failure Study Under a Slow Power Ramp
In a fast breeder reactor, a slow power ramp accident could lead to a local melting of the fuel depending on design and assumptions. If we assume cladding failure in addition to th...
SOYBEAN AND WASTE COOKING OIL BASED FEEDSTOCKS AS A SUSTAINABLE BIOFUEL
SOYBEAN AND WASTE COOKING OIL BASED FEEDSTOCKS AS A SUSTAINABLE BIOFUEL
Fuel in transportation is necessary and gas release from transportation activity raises concern of pollution. Sustainable fuels sources are from biomass can convert to the alternat...
Study on RP-3 Aviation Fuel Vapor Concentration
Study on RP-3 Aviation Fuel Vapor Concentration
Fuel vapor concentration is a key parameter for assessing the flammability of aircraft fuel tanks. However, the current research on RP-3 (Rocket Propellant-3) fuel vapor concentrat...
Thyroid Gland and Male Reproductive Anomalies Among Fuel Handlers in Gampaha District, Sri Lanka
Thyroid Gland and Male Reproductive Anomalies Among Fuel Handlers in Gampaha District, Sri Lanka
Abstract Introduction:Fuel handlers at petrol stations are continuously exposed to organic solvents from fuel and vehicle emissions. Endocrine disrupting chemicals (...

Back to Top