Javascript must be enabled to continue!
A Study on the Knocking Characteristics of an SI-HCCI Engine by Using In-Cylinder Visualization
View through CrossRef
<div class="section abstract"><div class="htmlview paragraph">In-cylinder visualization of the entire bore area at an identical frame rate was used to investigate knocking conditions under spark ignition (SI) combustion and under Homogeneous Charge Compression Ignition (HCCI) combustion in the same test engine. A frequency analysis was also conducted on the measured pressure signals. The results revealed that a combustion regime accompanied by strong pressure oscillations occurred in both the SI and HCCI modes, which was presumably caused by rapid autoignition with attendant brilliant light emission that took place near the cylinder wall. It was found that the knocking timing was the dominant factor of this combustion regime accompanied by cylinder pressure oscillations in both the SI and HCCI combustion modes.</div></div>
Title: A Study on the Knocking Characteristics of an SI-HCCI Engine by Using In-Cylinder Visualization
Description:
<div class="section abstract"><div class="htmlview paragraph">In-cylinder visualization of the entire bore area at an identical frame rate was used to investigate knocking conditions under spark ignition (SI) combustion and under Homogeneous Charge Compression Ignition (HCCI) combustion in the same test engine.
A frequency analysis was also conducted on the measured pressure signals.
The results revealed that a combustion regime accompanied by strong pressure oscillations occurred in both the SI and HCCI modes, which was presumably caused by rapid autoignition with attendant brilliant light emission that took place near the cylinder wall.
It was found that the knocking timing was the dominant factor of this combustion regime accompanied by cylinder pressure oscillations in both the SI and HCCI combustion modes.
</div></div>.
Related Results
Predictive simulation of single cylinder n-butanol HCCI engine
Predictive simulation of single cylinder n-butanol HCCI engine
Homogeneous Charge Compression Ignition (HCCI) is a commonly research new combustion mode due to its advantages over conventional combustion in internal combustion engine such as h...
Individual Cylinder Knock Detection Based on Ion Current Sensing: Correlation Analysis
Individual Cylinder Knock Detection Based on Ion Current Sensing: Correlation Analysis
This paper addresses issues related with the measurement, analysis and real-time control of knocking combustions in high-performance spark-ignition engines. In particular, the rela...
Thermal Barrier for Homogeneous Charge Compression Ignition Application
Thermal Barrier for Homogeneous Charge Compression Ignition Application
<div class="section abstract"><div class="htmlview paragraph">Stringent emissions regulations set forth by the Environmental Protection Agency has forced the automotive...
Computational Fluid Dynamics (CFD) Validation and Investigation the Effect of Piston Bowl Geometries Performance on Port Fuel Injection-Homogeneous Charge Compression Ignition (PFI-HCCI) Engines
Computational Fluid Dynamics (CFD) Validation and Investigation the Effect of Piston Bowl Geometries Performance on Port Fuel Injection-Homogeneous Charge Compression Ignition (PFI-HCCI) Engines
Homogeneous charge compression ignition (HCCI) is an advanced combustion strategy proposed to provide higher efficiency and lower emissions than conventional compression ignition. ...
Combustion and emission characteristics of a homogeneous charge compression ignition engine
Combustion and emission characteristics of a homogeneous charge compression ignition engine
Dimethyl ether (DME) is a kind of fuel with high cetane number and low evaporating temperature, which is suitable for a homogeneous charge compression ignition (HCCI) engine. The c...
Development of the Tour Split-Cycle Internal Combustion Engine
Development of the Tour Split-Cycle Internal Combustion Engine
<div class="section abstract"><div class="htmlview paragraph">The Tour engine is a novel split-cycle internal combustion engine (ICE) that divides the four-stroke Otto ...
VOLUMETRIC RIGIDITY OF HYDRAULIC SYSTEMS
VOLUMETRIC RIGIDITY OF HYDRAULIC SYSTEMS
A hydraulic drive is a set of interacting hydraulic devices that is designed to be ghosted by means of a working fluid under pressure. The main element in hydraulic drives most mac...
Individual Cylinder Control of Diesel Engines
Individual Cylinder Control of Diesel Engines
<div class="htmlview paragraph">Cylinder-by-cylinder variation control is an important issue to the solenoid-based electronic diesel engines. Large variation causes bad engin...

