Javascript must be enabled to continue!
SOURCE TERM ASSESSMENT FOR 100 MWE PRESSURIZED WATER REACTOR
View through CrossRef
One of the barriers on the implementation of nuclear energy in Indonesia is public perception towards the safety of nuclear power plants (NPPs). Therefore, it is necessary to perform a study about the radiation impact of normal and abnormal operations of an NPP. In accordance to the program of Ministry of Research and Technology period 2020-2024, concerning the plan to build a small modular reactor (SMR)-type NPP, a radiation safety study has been performed for the 100 MWe Pressurized Water Reactor (PWR-100MWe). Source term release of radioactive substances into the environment from PWR-100MWe is a starting point in the study of the radiological consequences of reactor operation. Therefore, this paper will examine the PWR-100MWe source term under normal and abnormal operating conditions, according to the design and the design basis accident (DBA). The initial trigger of the DBA is Lost of Coolant Accident (LOCA) such as Small LOCA and Large LOCA. Due to the limitations of available SMR data, the study of PWR-100MWe source term refers to the assumption of the release fraction of fission products per subsystem in a larger 1000MWe PWR. It is expected from this assumption that pessimistic source term will be obtained. The study begins with calculation of PWR-100MWe core inventory using ORIGEN2 code based on PWR-100MWe reactor parameters. Through the mechanistic source term model and PWR-1000MWe release parameters, source terms will be obtained for normal operation and abnormal conditions i.e. DBA. Normal source term is used to calculate the consequences of normal operation, which will be used for environmental monitoring and environmental safety analysis of the site. Whereas accident source term is the basis for calculating the radiological consequences of accidents used for SAR documents and nuclear preparedness.Keywords: SMR, PWR-100MWe, normal operation, source term, accident
National Research and Innovation Agency
Title: SOURCE TERM ASSESSMENT FOR 100 MWE PRESSURIZED WATER REACTOR
Description:
One of the barriers on the implementation of nuclear energy in Indonesia is public perception towards the safety of nuclear power plants (NPPs).
Therefore, it is necessary to perform a study about the radiation impact of normal and abnormal operations of an NPP.
In accordance to the program of Ministry of Research and Technology period 2020-2024, concerning the plan to build a small modular reactor (SMR)-type NPP, a radiation safety study has been performed for the 100 MWe Pressurized Water Reactor (PWR-100MWe).
Source term release of radioactive substances into the environment from PWR-100MWe is a starting point in the study of the radiological consequences of reactor operation.
Therefore, this paper will examine the PWR-100MWe source term under normal and abnormal operating conditions, according to the design and the design basis accident (DBA).
The initial trigger of the DBA is Lost of Coolant Accident (LOCA) such as Small LOCA and Large LOCA.
Due to the limitations of available SMR data, the study of PWR-100MWe source term refers to the assumption of the release fraction of fission products per subsystem in a larger 1000MWe PWR.
It is expected from this assumption that pessimistic source term will be obtained.
The study begins with calculation of PWR-100MWe core inventory using ORIGEN2 code based on PWR-100MWe reactor parameters.
Through the mechanistic source term model and PWR-1000MWe release parameters, source terms will be obtained for normal operation and abnormal conditions i.
e.
DBA.
Normal source term is used to calculate the consequences of normal operation, which will be used for environmental monitoring and environmental safety analysis of the site.
Whereas accident source term is the basis for calculating the radiological consequences of accidents used for SAR documents and nuclear preparedness.
Keywords: SMR, PWR-100MWe, normal operation, source term, accident.
Related Results
Preliminary Design of A10 MWE OTEC Power Plant and 50 MWE OTEC Power Modules
Preliminary Design of A10 MWE OTEC Power Plant and 50 MWE OTEC Power Modules
ABSTRACT
Preliminary designs for a 10 MWe Modular Application OTEC Power System and 50 MWe OTEC Power System Modules are discussed. The power systems are based on...
Evolution of Antimicrobial Resistance in Community vs. Hospital-Acquired Infections
Evolution of Antimicrobial Resistance in Community vs. Hospital-Acquired Infections
Abstract
Introduction
Hospitals are high-risk environments for infections. Despite the global recognition of these pathogens, few studies compare microorganisms from community-acqu...
A Practical Methodology for the Design and Cost Estimation of Solar Tower Power Plants
A Practical Methodology for the Design and Cost Estimation of Solar Tower Power Plants
Concerns over the environmental influence of greenhouse gas (GHG) emissions have encouraged researchers to develop alternative power technologies. Among the most promising, environ...
ANALISIS PENGATURAN POSISI CONTROL RODS PADA KONSEP REAKTOR DAYA EKSPERIMENTAL INDONESIA PASCA REACTOR SCRAM
ANALISIS PENGATURAN POSISI CONTROL RODS PADA KONSEP REAKTOR DAYA EKSPERIMENTAL INDONESIA PASCA REACTOR SCRAM
ANALISISPENGATURAN POSISI CONTROL RODS PADA KONSEP REAKTOR DAYA EKSPERIMENTAL INDONESIA PASCA REACTOR SCRAM POST REACTOR SCRAM CONTROL RODS POSITION ADJUSTMENT ANALYSIS FOR THE IN...
Estudio de viabilidad de cinco centrales térmicas solares en La Joya, Arequipa
Estudio de viabilidad de cinco centrales térmicas solares en La Joya, Arequipa
This article deals with the calculation of LEC (levelized cost of energy) of five CSP (Concentrated solar power) plants of different capacities 20 MWe, 50 MWe, 100 MWe and 200 MWe,...
Research of the Standards Compilation of Welding Material for Carbon Steel in Pressurized Water Reactor Nuclear Power Plants
Research of the Standards Compilation of Welding Material for Carbon Steel in Pressurized Water Reactor Nuclear Power Plants
Abstract
Carbon steel welding is a major manufacturing method for nuclear power construction. For the moment, there are two sets of standards of welding material for...
Book 2. POWER CONTROL FOR AN ELECTRICALLY POWERED WATER TREATMENT APPARATUS
Book 2. POWER CONTROL FOR AN ELECTRICALLY POWERED WATER TREATMENT APPARATUS
Detailed Description of How the Power Control of the Present Invention Synchronizes the Power Supply to a W2W Electrochemical Reactor The overall, general fundamental "patentable" ...
Use of Formation Water and Associated Gases and their Simultaneous Utilization for Obtaining Microelement Concentrates Fresh Water and Drinking Water
Use of Formation Water and Associated Gases and their Simultaneous Utilization for Obtaining Microelement Concentrates Fresh Water and Drinking Water
Abstract Purpose: The invention relates to the oil industry, inorganic chemistry, in particular, to the methods of complex processing of formation water, using flare gas of oil and...

