Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Laser Induced Damage in Optical Materials Thirteenth ASTM Symposium November 17–18, 1981

View through CrossRef
The Thirteenth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, November 17–18, 1981. The Symposium was held under the auspices of ASTM Committee F-1, Subcommittee on Laser Standards, with the joint sponsorship of NBS, the Defense Advanced Research Project Agency, the Department of Energy, The Office of Naval Research, and the Air Force Office of Scientific Research. Approximately 200 scientists attended the Symposium, including representatives of the United Kingdom, France, Japan, West Germany, the Peoples Republic of China, Sweden, and the USSR. The Symposium was divided into sessions concerning Materials and Measurements, Mirrors and Surfaces, Thin Films, and finally Fundamental Mechanisms. As in previous years, the emphasis of the papers presented at the Symposium was directed toward new frontiers and new developments. Particular emphasis was given to materials for high power apparatus. The wavelength range of prime interest was from 10.6 μm to the uv region. Highlights included surface characterization, thin film-substrate boundaries, and advances in fundamental laser-matter threshold interactions and mechanisms. The scaling of damage thresholds with pulse duration, focal area, and wavelength was discussed in detail. Harold E. Bennett of the Naval Weapons Center, Arthur H. Guenther of the Air Force Weapons Laboratory, David Milam of the Lawrence Livermore National Laboratory, and Brian E. Newnam of the Los Alamos National Laboratory were co-chairmen of the Symposium. The Fourteenth Annual Symposium is scheduled for November 15–17, 1982, at the National Bureau of Standards, Boulder, Colorado.
ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
Title: Laser Induced Damage in Optical Materials Thirteenth ASTM Symposium November 17–18, 1981
Description:
The Thirteenth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, November 17–18, 1981.
The Symposium was held under the auspices of ASTM Committee F-1, Subcommittee on Laser Standards, with the joint sponsorship of NBS, the Defense Advanced Research Project Agency, the Department of Energy, The Office of Naval Research, and the Air Force Office of Scientific Research.
Approximately 200 scientists attended the Symposium, including representatives of the United Kingdom, France, Japan, West Germany, the Peoples Republic of China, Sweden, and the USSR.
The Symposium was divided into sessions concerning Materials and Measurements, Mirrors and Surfaces, Thin Films, and finally Fundamental Mechanisms.
As in previous years, the emphasis of the papers presented at the Symposium was directed toward new frontiers and new developments.
Particular emphasis was given to materials for high power apparatus.
The wavelength range of prime interest was from 10.
6 μm to the uv region.
Highlights included surface characterization, thin film-substrate boundaries, and advances in fundamental laser-matter threshold interactions and mechanisms.
The scaling of damage thresholds with pulse duration, focal area, and wavelength was discussed in detail.
Harold E.
Bennett of the Naval Weapons Center, Arthur H.
Guenther of the Air Force Weapons Laboratory, David Milam of the Lawrence Livermore National Laboratory, and Brian E.
Newnam of the Los Alamos National Laboratory were co-chairmen of the Symposium.
The Fourteenth Annual Symposium is scheduled for November 15–17, 1982, at the National Bureau of Standards, Boulder, Colorado.

Related Results

Laser Induced Damage in Optical Materials Twelfth ASTM Symposium September 30 — October 1, 1980
Laser Induced Damage in Optical Materials Twelfth ASTM Symposium September 30 — October 1, 1980
The Twelfth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, September 30 –...
Dual Laser Method for Experimentally Weathering Planetary Regoliths
Dual Laser Method for Experimentally Weathering Planetary Regoliths
<p>Experimental space weathering—whether laser, thermal reduction, impact, or ion based—is a critical endeavor to accurately interpret spa...
Continuous wave frequency modulated optical feedback (CWFM-OF) : theory and applications
Continuous wave frequency modulated optical feedback (CWFM-OF) : theory and applications
Diese Arbeit soll einen Beitrag leisten zur Entwicklung neuer Sensorstrategien, basierend auf Phänomenen der optischer Rückkopplung, in Kombination mit die Intensitätsmodulation de...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Microchip Lasers and Micro-Optics Technologies
Microchip Lasers and Micro-Optics Technologies
Microchip lasers are the most compact (~1mm3) and the simplest diode pumped solid state lasers The mirrors of the optical cavity are directly deposited on the polished faces of a t...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
<p>Carbon fiber-reinforced plastics (CFRPs) have gained widespread popularity as a lightweight, high-strength alternative to traditional materials. The unique anisotropic pro...

Back to Top