Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Laser Induced Damage in Optical Materials Twelfth ASTM Symposium September 30 — October 1, 1980

View through CrossRef
The Twelfth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, September 30 –October 1,1980. The Symposium was held under the auspices of ASTM Committee F-1, Subcommittee on Laser Standards, with the joint sponsorship of NBS, the Defense Advanced Research Project Agency, the Department of Energy, the Office of Naval Research, and the Air Force Office of Scientific Research. Over 150 scientists attended the Symposium, including representatives of the United Kingdom, France, Japan, and West Germany. The Symposium was divided into sessions concerning Materials and Measurements, Mirrors and Surfaces, Thin Films, and finally Fundamental Mechanisms. As in previous years, the emphasis of the papers presented at the Symposium was directed toward new frontiers and new developments. Particular emphasis was given to materials for high power systems. The wavelength range of prime interest was from 10.6 μm to the uv region. Highlights included surface characterization, thin film-substrate boundaries, and advances in fundamental laser-matter threshold interactions and mechanisms. The scaling of damage thresholds with pulse duration, focal area, and wavelength was discussed in detail. Harold E. Bennett of the Naval Weapons Center, Alexander J. Glass of the Lawrence Livermore Laboratories, Arthur H. Guenther of the Air Force Weapons Laboratory, and Brian E. Newnam of the Los Alamos Scientific Laboratory were co-chairmen of the Symposium. The Thirteenth Annual Symposium is scheduled for November 17–18, 1981 at the National Bureau of Standards, Boulder, Colorado.
ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
Title: Laser Induced Damage in Optical Materials Twelfth ASTM Symposium September 30 — October 1, 1980
Description:
The Twelfth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, September 30 –October 1,1980.
The Symposium was held under the auspices of ASTM Committee F-1, Subcommittee on Laser Standards, with the joint sponsorship of NBS, the Defense Advanced Research Project Agency, the Department of Energy, the Office of Naval Research, and the Air Force Office of Scientific Research.
Over 150 scientists attended the Symposium, including representatives of the United Kingdom, France, Japan, and West Germany.
The Symposium was divided into sessions concerning Materials and Measurements, Mirrors and Surfaces, Thin Films, and finally Fundamental Mechanisms.
As in previous years, the emphasis of the papers presented at the Symposium was directed toward new frontiers and new developments.
Particular emphasis was given to materials for high power systems.
The wavelength range of prime interest was from 10.
6 μm to the uv region.
Highlights included surface characterization, thin film-substrate boundaries, and advances in fundamental laser-matter threshold interactions and mechanisms.
The scaling of damage thresholds with pulse duration, focal area, and wavelength was discussed in detail.
Harold E.
Bennett of the Naval Weapons Center, Alexander J.
Glass of the Lawrence Livermore Laboratories, Arthur H.
Guenther of the Air Force Weapons Laboratory, and Brian E.
Newnam of the Los Alamos Scientific Laboratory were co-chairmen of the Symposium.
The Thirteenth Annual Symposium is scheduled for November 17–18, 1981 at the National Bureau of Standards, Boulder, Colorado.

Related Results

Laser Spectrometric Techniques in Analytical Atomic Spectrometry
Laser Spectrometric Techniques in Analytical Atomic Spectrometry
Abstract Laser light has a number of spectacular properties that make it useful for analytical spectrometry. One is that it has a high directionality (i.e. i...
LEO-to-GNSS Laser Interferometer for Space Geodesy with Laser DORIS and Laser SAR
LEO-to-GNSS Laser Interferometer for Space Geodesy with Laser DORIS and Laser SAR
In order to increase the accuracy of precise orbit determination for a single satellite or satellites in LEO formation, we propose using a LEO-to-GNSS laser interferometer, what we...
Laser Induced Damage in Optical Materials Thirteenth ASTM Symposium November 17–18, 1981
Laser Induced Damage in Optical Materials Thirteenth ASTM Symposium November 17–18, 1981
The Thirteenth Annual Symposium on Optical Materials for High Power Lasers (Boulder Damage Symposium) was held at the National Bureau of Standards in Boulder, Colorado, November 17...
Optical far‐field super‐resolution microscopy with local probes
Optical far‐field super‐resolution microscopy with local probes
The local fields, such as magnetic, optic and temperature, can be used to characterize the properties of physical and biological materials. These local fields could be measured wit...
Continuous wave frequency modulated optical feedback (CWFM-OF) : theory and applications
Continuous wave frequency modulated optical feedback (CWFM-OF) : theory and applications
Diese Arbeit soll einen Beitrag leisten zur Entwicklung neuer Sensorstrategien, basierend auf Phänomenen der optischer Rückkopplung, in Kombination mit die Intensitätsmodulation de...
Dual Laser Method for Experimentally Weathering Planetary Regoliths
Dual Laser Method for Experimentally Weathering Planetary Regoliths
<p>Experimental space weathering—whether laser, thermal reduction, impact, or ion based—is a critical endeavor to accurately interpret spa...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
DAMPAK TEKNOLOGI TERHADAP PROSES BELAJAR MENGAJAR
DAMPAK TEKNOLOGI TERHADAP PROSES BELAJAR MENGAJAR
DAFTAR PUSTAKAAditama, M. H. R., & Selfiardy, S. (2022). Kehidupan Mahasiswa Kuliah Sambil Bekerja di Masa Pandemi Covid-19. Kidspedia: Jurnal Pendidikan Anak Usia Dini, 3(...

Back to Top