Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

wLEACH: Real-Time Meteorological Data Based Wind LEACH

View through CrossRef
Introduction:Nowadays, Wireless Sensor Network (WSN) plays an important role in various fields. The limited power capability of the sensor nodes in the WSN brings constraints on the performance of the network. Low Energy Adaptive Clustering Hierarchy (LEACH) is a promising protocol for WSN that suffers from higher energy consumption.Objective:The primary objective of this study is to give an alternate harvesting resource power to sensor nodes in the LEACH algorithm which can be equally capable of providing the same or sometimes better results.Methods:This study is based on real-time meteorological data. A real-time wind speed data is taken for the starting of a day to the end of the day on an hourly basis from the weather forecast. Now to convert this rotational energy into electrical energy, we used two types of wind turbines. For the proposed methodology, a micro wind turbine generator and 300watt wind turbine are used. Then this converted electrical energy is given to sensor nodes. For the clustering, the wind power operated nodes are given maximum preference to be elected as the cluster heads based on realtime wind meteorological data. We consider 10 wind-powered sensor nodes. As we increase the number of wind-powered sensor nodes in the network, the performance is increased in terms of a lifetime but then increases the complexity of the network. These wind-powered nodes remain alive in the network. Since the deployment of the sensor nodes is random, each simulation runs for 5 times and the average of first node dead, half node dead and last node dead is considered.Results:The experimental results for the micro wind turbine generator are compared based on with and without the MPPT controller. MPPT controller gives the maximum power by using the tip speed ratio control, power signal feedback control, and hill climb search control method. Therefore, the network lifetime should be higher for the MPPT based wind generator. Network lifetime and Energy consumption are compared for a micro wind turbine generator and 300watt wind turbine. Finally, the performance of the proposed system is compared with the modified solar LEACH implemented using real-time meteorological data.Conclusion:This paper has investigated the wind-based LEACH which uses the real-time meteorological data for the selection of the cluster head. Two types of wind generators are considered for the implementation and it is found that the performance of the commercial 300W wind turbine and the micro wind turbine with and without MPPT is almost similar since the data from both wind turbines are given on hourly basis. The performance of the wLEACH is compared with the sLEACH which shows that the network lifespan of the wLEACH is also nearly the same compared to the sLEACH. However, it was found that wind power generation is cheaper and efficient than solar power generation. Therefore, it is inferred that this proposed wLEACH provides a costefficient solution.
Title: wLEACH: Real-Time Meteorological Data Based Wind LEACH
Description:
Introduction:Nowadays, Wireless Sensor Network (WSN) plays an important role in various fields.
The limited power capability of the sensor nodes in the WSN brings constraints on the performance of the network.
Low Energy Adaptive Clustering Hierarchy (LEACH) is a promising protocol for WSN that suffers from higher energy consumption.
Objective:The primary objective of this study is to give an alternate harvesting resource power to sensor nodes in the LEACH algorithm which can be equally capable of providing the same or sometimes better results.
Methods:This study is based on real-time meteorological data.
A real-time wind speed data is taken for the starting of a day to the end of the day on an hourly basis from the weather forecast.
Now to convert this rotational energy into electrical energy, we used two types of wind turbines.
For the proposed methodology, a micro wind turbine generator and 300watt wind turbine are used.
Then this converted electrical energy is given to sensor nodes.
For the clustering, the wind power operated nodes are given maximum preference to be elected as the cluster heads based on realtime wind meteorological data.
We consider 10 wind-powered sensor nodes.
As we increase the number of wind-powered sensor nodes in the network, the performance is increased in terms of a lifetime but then increases the complexity of the network.
These wind-powered nodes remain alive in the network.
Since the deployment of the sensor nodes is random, each simulation runs for 5 times and the average of first node dead, half node dead and last node dead is considered.
Results:The experimental results for the micro wind turbine generator are compared based on with and without the MPPT controller.
MPPT controller gives the maximum power by using the tip speed ratio control, power signal feedback control, and hill climb search control method.
Therefore, the network lifetime should be higher for the MPPT based wind generator.
Network lifetime and Energy consumption are compared for a micro wind turbine generator and 300watt wind turbine.
Finally, the performance of the proposed system is compared with the modified solar LEACH implemented using real-time meteorological data.
Conclusion:This paper has investigated the wind-based LEACH which uses the real-time meteorological data for the selection of the cluster head.
Two types of wind generators are considered for the implementation and it is found that the performance of the commercial 300W wind turbine and the micro wind turbine with and without MPPT is almost similar since the data from both wind turbines are given on hourly basis.
The performance of the wLEACH is compared with the sLEACH which shows that the network lifespan of the wLEACH is also nearly the same compared to the sLEACH.
However, it was found that wind power generation is cheaper and efficient than solar power generation.
Therefore, it is inferred that this proposed wLEACH provides a costefficient solution.

Related Results

IBRE-LEACH: Improving The Performance of The BRE-LEACH For Wireless Sensor Networks
IBRE-LEACH: Improving The Performance of The BRE-LEACH For Wireless Sensor Networks
Abstract Wireless Sensor Networks (WSNs) are extensively used in diferent areas and especially in severe and harsh environments such as battlegrounds, volcanic areas, healt...
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Background: In a wind farm, the wind speed of the downstream wind turbine will be lower than the wind speed of the upstream wind turbine due to the influence of the wake. Therefore...
Sectored LEACH (S‐LEACH): An enhanced LEACH for wireless sensor network
Sectored LEACH (S‐LEACH): An enhanced LEACH for wireless sensor network
AbstractDue to the importance and the need of wireless sensor networks in several applications, lots of research has been carried out. The utmost challenging issue is regarding the...
Savonius Rotor for Offshore Wind Energy Conversion
Savonius Rotor for Offshore Wind Energy Conversion
Abstract Analysis of performance is presented for wind energy conversion by a Savonius type vertical axis rotor configured for generation of electrical power. The...
Optimization of the LEACH Protocol to Increase Stability on the Wireless Sensor Network
Optimization of the LEACH Protocol to Increase Stability on the Wireless Sensor Network
Wireless sensor networks (WSNs) are small devices that are run by batteries as minimal energy resources. The cluster method is one of the ways on WSN that is widely applied to the ...
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Background: The wind turbine is divided into a horizontal axis and a vertical axis depending on the relative positions of the rotating shaft and the ground. The advantage of the ch...
Performance Test and Simulation Study on the Air Path of CAP1400 Passive Containment Cooling System
Performance Test and Simulation Study on the Air Path of CAP1400 Passive Containment Cooling System
As a large scale passive pressurized water reactor nuclear power plant, CAP1400 can remove the reactor decay heat to outside containment with the air cooling in the air flow path o...

Back to Top