Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Automatic Transformer Cooling System Using PLC
View through CrossRef
In the previous 20 years transformer warming is a noteworthy issue in creating station, substation, circulation locale and different territories. The primary driver of overheating are Insulation overheating, Corona overheating, Liquid overheating, Arcing is overheating, screen testing overheating. Because of this it causes numerous issues, for example, Coil harm, bursting of transformer, Block of wind, and so forth. To lessen the warmth which is created from the transformer, to trip the transformer when it is in over warmth condition and the stop the absolute circuit for upkeep period a we have built up this task dependent on Programmable Logic Controller.
Title: Automatic Transformer Cooling System Using PLC
Description:
In the previous 20 years transformer warming is a noteworthy issue in creating station, substation, circulation locale and different territories.
The primary driver of overheating are Insulation overheating, Corona overheating, Liquid overheating, Arcing is overheating, screen testing overheating.
Because of this it causes numerous issues, for example, Coil harm, bursting of transformer, Block of wind, and so forth.
To lessen the warmth which is created from the transformer, to trip the transformer when it is in over warmth condition and the stop the absolute circuit for upkeep period a we have built up this task dependent on Programmable Logic Controller.
Related Results
Automatic Load Sharing of Transformer
Automatic Load Sharing of Transformer
Transformer plays a major role in the power system. It works 24 hours a day and provides power to the load. The transformer is excessive full, its windings are overheated which lea...
PLC Based Load Sharing of Transformers
PLC Based Load Sharing of Transformers
The transformer is very expensive and bulky power system equipment. It runs and feed the load for 24 hours a day. Sometimes the load on the transformer unexpectedly rises above its...
ANALISIS PENGARUH MASA OPERASIONAL TERHADAP PENURUNAN KAPASITAS TRANSFORMATOR DISTRIBUSI DI PT PLN (PERSERO)
ANALISIS PENGARUH MASA OPERASIONAL TERHADAP PENURUNAN KAPASITAS TRANSFORMATOR DISTRIBUSI DI PT PLN (PERSERO)
One cause the interruption of transformer is loading that exceeds the capabilities of the transformer. The state of continuous overload will affect the age of the transformer and r...
LIFE CYCLE OF TRANSFORMER 110/X KV AND ITS VALUE
LIFE CYCLE OF TRANSFORMER 110/X KV AND ITS VALUE
In a deregulated environment, power companies are in the constant process of reducing the costs of operating power facilities, with the aim of optimally improving the quality of de...
The Application of PLC Distributed Input/Output Technology Offshore
The Application of PLC Distributed Input/Output Technology Offshore
ABSTRACT
The Programmable Logic Controller is becoming a familiar part of the Process Controls on Offshore Facilities. The current evolution of this expanding tec...
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Abstract
Film cooling technology is widely used in gas turbines. Improvement of gas turbine thermal efficiency, specific power and specific thrust can be achieved by...
The significance and factors leading to heteroploidy in pleural lavage cytology
The significance and factors leading to heteroploidy in pleural lavage cytology
Introduction: Positive intraoperative pleural lavage cytology (pre-resection PLC) is considered a prognostic risk factor of primary lung cancer surgery. Positive findings suggest s...
Impingement/Effusion Cooling With Low Coolant Mass Flow
Impingement/Effusion Cooling With Low Coolant Mass Flow
A low coolant mass flow impingement/effusion design for a low NOx combustor wall cooling application was predicted, using conjugate heat transfer (CHT) computational fluid dynamics...