Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
SHAPING OF DUCTILE CAST IRON DEDICATED FOR SLAG LADLE
View through CrossRef
In industrial conditions, ductile iron was prepared and two molds were made, in which a 600mm thick plate was formed. Filling system for one mold was placed vertically and for the second -horizontally. In order to obtain cooling curves, "S" type thermocouples have been placed in the mold. After cooling the casts, the samples from the fixing points of thermocouples were cut by the trepanning method. In the "vertical" cast sample shrinkage porosity was observed, while in the "horizontal" cast sample no porosity was detected. A significant difference in the recorded temperature in the center of the casts was discovered, indicating a defect in "vertical" cast.
Title: SHAPING OF DUCTILE CAST IRON DEDICATED FOR SLAG LADLE
Description:
In industrial conditions, ductile iron was prepared and two molds were made, in which a 600mm thick plate was formed.
Filling system for one mold was placed vertically and for the second -horizontally.
In order to obtain cooling curves, "S" type thermocouples have been placed in the mold.
After cooling the casts, the samples from the fixing points of thermocouples were cut by the trepanning method.
In the "vertical" cast sample shrinkage porosity was observed, while in the "horizontal" cast sample no porosity was detected.
A significant difference in the recorded temperature in the center of the casts was discovered, indicating a defect in "vertical" cast.
.
Related Results
Pengaruh Penambahan Iron Slag Sebagai Subtitusi Agregat Kasar Terhadap Kuat Tekan Pada Beton
Pengaruh Penambahan Iron Slag Sebagai Subtitusi Agregat Kasar Terhadap Kuat Tekan Pada Beton
Slag is the residual product of blast furnace combustion, which is produced in the form of iron slag which is still not used properly, causing problems for the environment. In line...
Adhesive Behaviour of BOF Slag to BOF Lining Refractory in Slag Splashing Process
Adhesive Behaviour of BOF Slag to BOF Lining Refractory in Slag Splashing Process
A slag layer is formed when slag is splashed onto refractory lining in BOF slag splashing process. The melting temperature of the slag layer and the adhesion of the slag layer to t...
Issues of technology and conditions of smelting of low-silicon cast iron in blast furnaces
Issues of technology and conditions of smelting of low-silicon cast iron in blast furnaces
The issues of technology are considered and the conditions for smelting cast iron with a low silicon content (0.2‒0.3%) in blast furnaces are discussed. The relation between the re...
POTENSI SLAG NIKEL HALUS (FeNi 4) PT. ANTAM POMALAA SEBAGAI AGREGAT HALUS PADA CAMPURAN ASPAL
POTENSI SLAG NIKEL HALUS (FeNi 4) PT. ANTAM POMALAA SEBAGAI AGREGAT HALUS PADA CAMPURAN ASPAL
ABSTRAKSlag nikel (FeNi4) adalah jenis terbaru dengan ukuran butiran mendekati pasir (lolos No. 8). Jumlah buangan slag nikel telah mencapai 1 juta ton pada tahun 2018, sehingga be...
High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate
High-Temperature Wetting Behavior and Adhesion Mechanism of Cryolite-Based Molten Salt on SiC Refractory Substrate
The problem of the adhesion of aluminum slag to the inner wall of a vacuum ladle is essential but has not been addressed. Using a high-temperature wettability experimental setup, t...
Unveiling the third dimension of glass
Unveiling the third dimension of glass
Glass as a material has always fascinated architects. Its inherent transparency has given us the ability to create diaphanous barriers between the interior and the exterior that al...
Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China
Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China
To investigate the leaching characteristics and potential environmental effects of potentially toxic metals (PTMs) from alum mine tailings in Lujiang, Anhui Province, soaking tests...
Chemical Composition, pH Value, and Points of Zero Charge of High Calcium and High Iron Electric Arc Furnace Slag
Chemical Composition, pH Value, and Points of Zero Charge of High Calcium and High Iron Electric Arc Furnace Slag
Electric arc furnace (EAF) slag as filter media has been extensively used nowadays for wastewater treatment technology. Steel slag was produced as byproduct from steelmaking proces...