Javascript must be enabled to continue!
Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China
View through CrossRef
To investigate the leaching characteristics and potential environmental effects of potentially toxic metals (PTMs) from alum mine tailings in Lujiang, Anhui Province, soaking tests and simulated rainfall leaching experiments were conducted for two types of slag. PTMs comprising Cd, Cr, Cu, Mn, and Ni were detected in the slag. Cu and Cd contents exceeded the national soil risk screening values (GB 15618-2018). pH values of the two slag soaking solutions were negatively correlated with the solid:liquid ratio. pH values of the sintered slag soaking solutions with different solid:liquid ratios finally stabilized between 4.4 and 4.59, and those of the waste slag soaking solutions finally stabilized between 2.7 and 3.4. The concentrations of Cd, Cr, Cu, Mn, and Ni leached from waste slag were higher than those from sintered slag, and the dissolved concentrations of these PTMs in sintered slag were higher under rainfall leaching conditions than soaking conditions (the difference in Cr concentration was the smallest, 5.6%). The cumulative release of Cd, Cr, Cu, Mn, and Ni increased as the leaching liquid volume increased. The kinetic characteristics of the cumulative release of the five PTMs were best fitted by a double constant equation (R2 > 0.98 for all fits). Single factor index evaluations showed that Mn and Ni were the PTMs with high pollution degrees (Pi for Mn and Ni exceed 1) in the leaching solutions. However, considering the biotoxicity of PTMs, the water quality index evaluations showed that the water quality of the sintered slag soaking solution, the waste slag soaking solution, and the sintered slag leachate was good, poor, and undrinkable, respectively. The health risk assessment showed that the total non-carcinogenic risk (HI) values in adults for both the sintered slag leachate and waste slag soaking solution exceeded the safe level of 1, with HI values of 3.965 and 2.342, respectively. The hazard quotient (HQ) for Cd was 1.994 for the sintered slag leachate, and Cd and Cr make up 50.29% and 15.93% of the total risk, respectively. Cr makes up 28.38% of the total risk for the waste slag soaking solution. These results indicate a high non-carcinogenic risk of exposure to Cd and Cr in the leaching solution used for drinking purposes. These findings may provide a reference for the evaluation and ecological control of PTM pollution in alum mining areas.
Title: Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China
Description:
To investigate the leaching characteristics and potential environmental effects of potentially toxic metals (PTMs) from alum mine tailings in Lujiang, Anhui Province, soaking tests and simulated rainfall leaching experiments were conducted for two types of slag.
PTMs comprising Cd, Cr, Cu, Mn, and Ni were detected in the slag.
Cu and Cd contents exceeded the national soil risk screening values (GB 15618-2018).
pH values of the two slag soaking solutions were negatively correlated with the solid:liquid ratio.
pH values of the sintered slag soaking solutions with different solid:liquid ratios finally stabilized between 4.
4 and 4.
59, and those of the waste slag soaking solutions finally stabilized between 2.
7 and 3.
4.
The concentrations of Cd, Cr, Cu, Mn, and Ni leached from waste slag were higher than those from sintered slag, and the dissolved concentrations of these PTMs in sintered slag were higher under rainfall leaching conditions than soaking conditions (the difference in Cr concentration was the smallest, 5.
6%).
The cumulative release of Cd, Cr, Cu, Mn, and Ni increased as the leaching liquid volume increased.
The kinetic characteristics of the cumulative release of the five PTMs were best fitted by a double constant equation (R2 > 0.
98 for all fits).
Single factor index evaluations showed that Mn and Ni were the PTMs with high pollution degrees (Pi for Mn and Ni exceed 1) in the leaching solutions.
However, considering the biotoxicity of PTMs, the water quality index evaluations showed that the water quality of the sintered slag soaking solution, the waste slag soaking solution, and the sintered slag leachate was good, poor, and undrinkable, respectively.
The health risk assessment showed that the total non-carcinogenic risk (HI) values in adults for both the sintered slag leachate and waste slag soaking solution exceeded the safe level of 1, with HI values of 3.
965 and 2.
342, respectively.
The hazard quotient (HQ) for Cd was 1.
994 for the sintered slag leachate, and Cd and Cr make up 50.
29% and 15.
93% of the total risk, respectively.
Cr makes up 28.
38% of the total risk for the waste slag soaking solution.
These results indicate a high non-carcinogenic risk of exposure to Cd and Cr in the leaching solution used for drinking purposes.
These findings may provide a reference for the evaluation and ecological control of PTM pollution in alum mining areas.
Related Results
Electrocoagulation for the Treatment of Oil Sands Tailings Water
Electrocoagulation for the Treatment of Oil Sands Tailings Water
Title: Electrocoagulation for the treatment of oil sands tailings water
The Canadian oil sands industry has been receiving widespread International criticism on env...
Predicting Oil Sands Tailings Behaviour From Clay Content and Water Chemistry
Predicting Oil Sands Tailings Behaviour From Clay Content and Water Chemistry
Abstract
A variety of tailings handling technologies have been developed over the years to deal with the accumulated mature fine tailings (MFT) and to mitigate st...
The Stability of Tailings Dams under Dry-Wet Cycles: A Case Study in Luonan, China
The Stability of Tailings Dams under Dry-Wet Cycles: A Case Study in Luonan, China
Instability of tailings dams may result in loss of life and property and serious environmental pollution. The position of the tailings dam’s phreatic line varies due to continuousl...
Selective recovery of copper from mine tailings using a green leaching agent
Selective recovery of copper from mine tailings using a green leaching agent
The growing demand for Critical and Strategic Raw Materials (CRMs, SRMs) and the limited availability of primary resources in Europe have renewed regulatory and scientific interest...
Release Characteristics of Pb from Zn-Pb Mine Tailings Under Simulation Leaching Conditions
Release Characteristics of Pb from Zn-Pb Mine Tailings Under Simulation Leaching Conditions
Abstract
In this paper, the results obtained from various leaching tests to determine the leaching behavior of lead from lead-zinc mine tailing under natural conditions wer...
Geotechnical properties of polymer-amended tailings solvent recovery unit (TSRU) oil sands tailings
Geotechnical properties of polymer-amended tailings solvent recovery unit (TSRU) oil sands tailings
Fine tailings from the tailings solvent recovery unit (TSRU) in the Athabasca oil sands are known to contain a relatively high pyrite content and a high residual hydrocarbon conten...
Hydrometallurgical Processing of the Wastes of Polymetallic Ore Dressing
Hydrometallurgical Processing of the Wastes of Polymetallic Ore Dressing
The possibility of hydrometallurgical treatment of old flotation tailings to extract base and noble metals was investigated. Two samples of old flotation tailings samples containin...
EFFECTS OF HEAVY METALS, CONTAINED IN FLOTATION TAILINGS, ON PLANTS USED IN REVEGETATION
EFFECTS OF HEAVY METALS, CONTAINED IN FLOTATION TAILINGS, ON PLANTS USED IN REVEGETATION
During the processing of precious and base metal ores from the Baia Mare mining area, which contained Au, Ag, Cu, Pb and Zn, large amounts of flotation tailings resulted, which wer...

