Javascript must be enabled to continue!
Observed high incidence of buried bumper syndrome associated with Freka PEG tubes
View through CrossRef
Background
Buried bumper syndrome (BBS) is an uncommon but significant complication of percutaneous endoscopic gastrostomy (PEG), which occurs due to overgrowth of gastric mucosa over the inner bumper of the gastrostomy tube. A high incidence of BBS was observed in patients with Freka PEG tubes.
Objective
To review case numbers of BBS and confirm the observed association with Freka tubes to determine whether change of practice should be considered.
Design
Data was collected on the number of cases of BBS reported to the community nutrition team Birmingham, UK. Data on type of PEG kit and total number of PEGs inserted between 2009 and 2013 were collected. The electronic endoscopy reporting database was used to compare case numbers of BBS in our Trust in years when Corflo and Freka PEG tubes were used, respectively. Data from our Trust were also compared with that from a Trust using Corflo only.
Results
Fifty-eight cases of BBS were reported in the area covered by the Birmingham community nutrition team between 2009 and 2013, all of which were associated with Freka PEG tubes. An estimated 1000–1200 PEGs were inserted during this period, representing an incidence of BBS of 4.8–5.8%. No cases of BBS occurred over the same period in the comparison Trust (451 Corflo PEGs inserted).
Conclusions
Our review confirmed our observation of an increased risk of BBS with Freka PEG tubes. Clinicians should be aware of our findings when deciding which brand of PEG tube to insert, particularly in patients with a previous history of BBS.
Title: Observed high incidence of buried bumper syndrome associated with Freka PEG tubes
Description:
Background
Buried bumper syndrome (BBS) is an uncommon but significant complication of percutaneous endoscopic gastrostomy (PEG), which occurs due to overgrowth of gastric mucosa over the inner bumper of the gastrostomy tube.
A high incidence of BBS was observed in patients with Freka PEG tubes.
Objective
To review case numbers of BBS and confirm the observed association with Freka tubes to determine whether change of practice should be considered.
Design
Data was collected on the number of cases of BBS reported to the community nutrition team Birmingham, UK.
Data on type of PEG kit and total number of PEGs inserted between 2009 and 2013 were collected.
The electronic endoscopy reporting database was used to compare case numbers of BBS in our Trust in years when Corflo and Freka PEG tubes were used, respectively.
Data from our Trust were also compared with that from a Trust using Corflo only.
Results
Fifty-eight cases of BBS were reported in the area covered by the Birmingham community nutrition team between 2009 and 2013, all of which were associated with Freka PEG tubes.
An estimated 1000–1200 PEGs were inserted during this period, representing an incidence of BBS of 4.
8–5.
8%.
No cases of BBS occurred over the same period in the comparison Trust (451 Corflo PEGs inserted).
Conclusions
Our review confirmed our observation of an increased risk of BBS with Freka PEG tubes.
Clinicians should be aware of our findings when deciding which brand of PEG tube to insert, particularly in patients with a previous history of BBS.
Related Results
KECEPATAN PELARUTAN PIROKSIKAM HASIL PEMBENTUKAN DISPERSI PADAT DENGAN PEG 4000 DAN PEG 6000
KECEPATAN PELARUTAN PIROKSIKAM HASIL PEMBENTUKAN DISPERSI PADAT DENGAN PEG 4000 DAN PEG 6000
Latar belakang: Piroksikam merupakan obat analgetika – antipiretika dan anti inflamasi yang memiliki kelarutan dalam air sangat kecil. Mekanisme absorpsinya difusi pasif, maka kece...
Hydrogel and Polyester Ventilation Tubes in an Animal Model
Hydrogel and Polyester Ventilation Tubes in an Animal Model
ProblemDetermine the resorption rate and biocompatibility characteristics of novel cross‐linked hydrogel ventilations tubes and varied formulations of polyester ventilation tubes.M...
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
"Since bumper reinforcements are positioned at front/rear ends of vehicles, weight reduction of the bumper reinforcements improves vehicle dynamic performance by reducing a yaw mom...
Drought stress effects on Lathyrus seedlings: A morpho-physiological and molecular study
Drought stress effects on Lathyrus seedlings: A morpho-physiological and molecular study
The experiment aimed to investigate the impact of polyethylene glycol (PEG) treatments, specifically 0% (control), 15% (PEG-I), and 20% (PEG-II), on various seed quality traits, pr...
Hydrogel Formation between Enantiomeric B‐A‐B‐Type Block Copolymers of Polylactides (PLLA or PDLA: A) and Polyoxyethylene (PEG: B); PEG‐PLLA‐PEG and PEG‐PDLA‐PEG
Hydrogel Formation between Enantiomeric B‐A‐B‐Type Block Copolymers of Polylactides (PLLA or PDLA: A) and Polyoxyethylene (PEG: B); PEG‐PLLA‐PEG and PEG‐PDLA‐PEG
AbstractSummary: A mixed suspension of the enantiomeric B‐A‐B triblock copolymers, polyoxyethylene‐block‐poly(L‐lactide)‐block‐polyoxyethylene (PEG‐PLLA‐PEG) and polyoxyethylene‐bl...
Pemakain Lip Bumper pada Anak Cerebral Palsi dengan Kasus Drooling, Inkompetensi Bibir dan Kebiasaan Menggigit-gigit Bibir Bawah
Pemakain Lip Bumper pada Anak Cerebral Palsi dengan Kasus Drooling, Inkompetensi Bibir dan Kebiasaan Menggigit-gigit Bibir Bawah
Latar Belakang. Anak yang menderita cerebral palsi pada umumnya mempunyai keluhan ketidakmampuan dalam pengontrolan saliva dalam rongga mulutnya. Pada kondisi tersebut penderita me...
Copolyester of trimellitic acid, glycerol, and poly(ethylene glycol): Synthesis and characterization
Copolyester of trimellitic acid, glycerol, and poly(ethylene glycol): Synthesis and characterization
AbstractA series of copolyesters having a broad range of biodegradable crosslinks were synthesised by FeCl3‐catalyzed polyesterification of trimellitic acid and glycerol containing...
Analyses of peg‐hole jamming in automatic assembly machines
Analyses of peg‐hole jamming in automatic assembly machines
PurposeThe purpose of this paper is to investigate theoretically the process of jamming in the peg‐hole type parts and to derive a mathematical model of jamming.Design/methodology/...

