Javascript must be enabled to continue!
Elasto-Damage Constitutive Modelling of Recycled Aggregate Concrete
View through CrossRef
Use of recycled aggregates in concrete has proved to be beneficial in attaining sustainable construction without compromising overall material and structural performance when compared with concrete containing natural aggregates. However, use of the recycled aggregates in concrete have resulted in reduction in compressive and tensile strengths with the recycled aggregates percentage increase in concrete. Furthermore, it is important to note that most of the finite element software used in the construction industry use concrete model derived from the test results of the conventional concrete, therefore, they may not always predict safe solution for recycled aggregates concrete (RAC). Therefore, in this investigation elasto-damage, proposed by Khan and Zahra, for natural aggregate concrete (NAC) was modified to incorporate the influence of recycled aggregates on the behaviour of concrete. Model use four parameters α, β, γ critical energy release rate (Rc) to predict the behaviour of recycled aggregate concrete for multi axial stress states. Parameters α, β and γ are used to predict the different behavior of concrete in tension and compression while Rc controls the damage growth rate. These parameters are defined as a function of concrete compressive strength (fc/) and its initial elastic modulus (Eo). Existing test results for uniaxial compressive state of stress were used to validate this model and it was found that it predicts better post cracking and post peak-behaviour of RAC as compared to the commercially available models for conventional concrete
North Atlantic University Union (NAUN)
Title: Elasto-Damage Constitutive Modelling of Recycled Aggregate Concrete
Description:
Use of recycled aggregates in concrete has proved to be beneficial in attaining sustainable construction without compromising overall material and structural performance when compared with concrete containing natural aggregates.
However, use of the recycled aggregates in concrete have resulted in reduction in compressive and tensile strengths with the recycled aggregates percentage increase in concrete.
Furthermore, it is important to note that most of the finite element software used in the construction industry use concrete model derived from the test results of the conventional concrete, therefore, they may not always predict safe solution for recycled aggregates concrete (RAC).
Therefore, in this investigation elasto-damage, proposed by Khan and Zahra, for natural aggregate concrete (NAC) was modified to incorporate the influence of recycled aggregates on the behaviour of concrete.
Model use four parameters α, β, γ critical energy release rate (Rc) to predict the behaviour of recycled aggregate concrete for multi axial stress states.
Parameters α, β and γ are used to predict the different behavior of concrete in tension and compression while Rc controls the damage growth rate.
These parameters are defined as a function of concrete compressive strength (fc/) and its initial elastic modulus (Eo).
Existing test results for uniaxial compressive state of stress were used to validate this model and it was found that it predicts better post cracking and post peak-behaviour of RAC as compared to the commercially available models for conventional concrete.
Related Results
Compressive Strength of Concrete with Recycled Concrete Aggregate as Coarse Aggregate and Recycled Paving Block Aggregate as Fine Aggregate Partially Substituted by Recycled Brick Aggregate
Compressive Strength of Concrete with Recycled Concrete Aggregate as Coarse Aggregate and Recycled Paving Block Aggregate as Fine Aggregate Partially Substituted by Recycled Brick Aggregate
An excessive extraction of natural resources for aggregate in concrete mix can caused an environmental degradation. Â According to Indonesia ministry of industry in 2017, the use o...
Mix Design Recycled Aggregate Pervious Concrete and the Influence on Pavement Property
Mix Design Recycled Aggregate Pervious Concrete and the Influence on Pavement Property
Abstract
This paper prepared recycled aggregate pervious concrete by replacing natural aggregate with 100% volume of waste concrete. We carried out experiments to st...
The influence of recycled concrete aggregate on the properties of concrete
The influence of recycled concrete aggregate on the properties of concrete
Use of Recycled Coarse Aggregate (RCA) in concrete can be described in terms of environmental protection and economy. This paper deals with the mechanical properties of concrete co...
Effect of recycled course aggregate from concrete debris on the strength of concrete
Effect of recycled course aggregate from concrete debris on the strength of concrete
Abstract
The paper investigates the fresh and hardened mechanical properties of a concrete mix produced with partial or full substitution of natural aggregates with ...
Microstructure of concrete prepared with construction recycled aggregates
Microstructure of concrete prepared with construction recycled aggregates
Conservation of natural resources, shortage of waste land and the high cost associated to treatment prior to disposal are driving growing interest in the recycling of construction ...
Influence of Recycled Aggregate Quality on Recycled Concrete
Influence of Recycled Aggregate Quality on Recycled Concrete
This article deals with the influence of recycled aggregate quality on recycled concrete. Replacement of natural aggregate by recycling aggregate has a negative influence on the pr...
Experimental Study of Compressive Properties and Environmental Impact of Recycled Aggregate
Experimental Study of Compressive Properties and Environmental Impact of Recycled Aggregate
As the main component of fiber-reinforced recycled aggregate concrete, the properties of recycled aggregate determine whether recycled aggregate concrete can be used in engineering...
Eurocode Shear Design of Coarse Recycled Aggregate Concrete: Reliability Analysis and Partial Factor Calibration
Eurocode Shear Design of Coarse Recycled Aggregate Concrete: Reliability Analysis and Partial Factor Calibration
This paper contributes to the definition of design clauses for coarse recycled aggregate concrete. One of the main reasons for scepticism towards recycled aggregate concrete is the...

