Javascript must be enabled to continue!
On-Board Diagnostics for Li-Ion Batteries Using Electrochemical Impedance Spectroscopy (EIS)-Based Health Estimation Models
View through CrossRef
There exists a growing need for standardized On-Board Diagnostics (OBD) for electric vehicles [1] to provide accurate health metrics and guarantees to both consumers and manufacturers.
Previous work has shown the powerful LIB capacity-based State-of-Health (SoH) estimation capability of Electrochemical Impedance Spectroscopy (EIS) measurements and data-driven models [2] [3]. Since EIS measurements are dependent not only on SoH but also State-of-Charge (SoC) and temperature [4], it is important that the measurements are conducted after the cell reaches an equilibrium, and that these other variables are also tracked. Although EIS measurements are somewhat quicker than some traditional capacity-determination experimental methods, the time taken for such measurements is not insignificant. Therefore, building a pipeline to determin the EIS frequency measurements most important for SoH estimation is an important task in developing a suitable EIS-based OBD. By exploring a frequency range between 0.1 and 200 Hz, we study EIS measurements related to diffusion and charge transfer processes in LIB operation [5], with each process being partially distinguishable due to their varying timescales.
In this work, using EIS data collected from 5Ah LIBs with an NMC-111 cathode and a graphite anode at various SoCs (0, 25, 50, 75 and 100%) and cell lifetime (0, 10, 20, 40 and 90 days) as input features, we develop sequential, data-driven health estimation models for LIBs. The 22 cells used for this analysis have been aged over a period of 90 days in two different ways: either through active cycling at different C-rates (0.2 and 1C) and temperatures (0, 25 and 40⁰C), or passive “calendar aging” where the cells are left without use at a specific temperature and SOC. Using feature attribution techniques (Shapley values, feature occlusion, etc.), we find the most influential of the frequency ranges in the EIS measurements that relate strongly with cell performance degradation. To develop a streamlined and efficient SoH estimation framework, we formulate an optimization problem to find the EIS experimental design in terms of frequency ranges that delivers maximum accuracy in SoH estimation at different points in the lifetime of the cell. These streamlined and optimized EIS experimental designs and SoH estimation models can be used directly in the development of rapid and efficient on-board diagnostic tools.
References:
[1] California Air Resources Board. (2023). Advanced Clean Cars II. https://ww2.arb.ca.gov/our-work/programs/advanced-clean-cars-program/advanced-clean-cars-ii
[2] Zhang, Yunwei, et al. "Identifying degradation patterns of lithium ion batteries from impedance spectroscopy using machine learning." Nature communications 11.1 (2020): 1706.
[3] Jiang, Bo, et al. "A comparative study of different features extracted from electrochemical impedance spectroscopy in state of health estimation for lithium-ion batteries." Applied Energy 322 (2022): 119502.
[4] Mc Carthy, Kieran, et al. "Use of impedance spectroscopy for the estimation of Li-ion battery state of charge, state of health and internal temperature." Journal of the Electrochemical Society 168.8 (2021): 080517.
[5] Pastor-Fernández, Carlos, et al. "Identification and quantification of ageing mechanisms in Lithium-ion batteries using the EIS technique." 2016 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2016.
The Electrochemical Society
Title: On-Board Diagnostics for Li-Ion Batteries Using Electrochemical Impedance Spectroscopy (EIS)-Based Health Estimation Models
Description:
There exists a growing need for standardized On-Board Diagnostics (OBD) for electric vehicles [1] to provide accurate health metrics and guarantees to both consumers and manufacturers.
Previous work has shown the powerful LIB capacity-based State-of-Health (SoH) estimation capability of Electrochemical Impedance Spectroscopy (EIS) measurements and data-driven models [2] [3].
Since EIS measurements are dependent not only on SoH but also State-of-Charge (SoC) and temperature [4], it is important that the measurements are conducted after the cell reaches an equilibrium, and that these other variables are also tracked.
Although EIS measurements are somewhat quicker than some traditional capacity-determination experimental methods, the time taken for such measurements is not insignificant.
Therefore, building a pipeline to determin the EIS frequency measurements most important for SoH estimation is an important task in developing a suitable EIS-based OBD.
By exploring a frequency range between 0.
1 and 200 Hz, we study EIS measurements related to diffusion and charge transfer processes in LIB operation [5], with each process being partially distinguishable due to their varying timescales.
In this work, using EIS data collected from 5Ah LIBs with an NMC-111 cathode and a graphite anode at various SoCs (0, 25, 50, 75 and 100%) and cell lifetime (0, 10, 20, 40 and 90 days) as input features, we develop sequential, data-driven health estimation models for LIBs.
The 22 cells used for this analysis have been aged over a period of 90 days in two different ways: either through active cycling at different C-rates (0.
2 and 1C) and temperatures (0, 25 and 40⁰C), or passive “calendar aging” where the cells are left without use at a specific temperature and SOC.
Using feature attribution techniques (Shapley values, feature occlusion, etc.
), we find the most influential of the frequency ranges in the EIS measurements that relate strongly with cell performance degradation.
To develop a streamlined and efficient SoH estimation framework, we formulate an optimization problem to find the EIS experimental design in terms of frequency ranges that delivers maximum accuracy in SoH estimation at different points in the lifetime of the cell.
These streamlined and optimized EIS experimental designs and SoH estimation models can be used directly in the development of rapid and efficient on-board diagnostic tools.
References:
[1] California Air Resources Board.
(2023).
Advanced Clean Cars II.
https://ww2.
arb.
ca.
gov/our-work/programs/advanced-clean-cars-program/advanced-clean-cars-ii
[2] Zhang, Yunwei, et al.
"Identifying degradation patterns of lithium ion batteries from impedance spectroscopy using machine learning.
" Nature communications 11.
1 (2020): 1706.
[3] Jiang, Bo, et al.
"A comparative study of different features extracted from electrochemical impedance spectroscopy in state of health estimation for lithium-ion batteries.
" Applied Energy 322 (2022): 119502.
[4] Mc Carthy, Kieran, et al.
"Use of impedance spectroscopy for the estimation of Li-ion battery state of charge, state of health and internal temperature.
" Journal of the Electrochemical Society 168.
8 (2021): 080517.
[5] Pastor-Fernández, Carlos, et al.
"Identification and quantification of ageing mechanisms in Lithium-ion batteries using the EIS technique.
" 2016 IEEE Transportation Electrification Conference and Expo (ITEC).
IEEE, 2016.
Related Results
Chemical pre-intercalation synthesis approach for novel layered cathode materials for Li-ion and beyond Li-ion batteries
Chemical pre-intercalation synthesis approach for novel layered cathode materials for Li-ion and beyond Li-ion batteries
Beyond-lithium ion (BLI) alkali ion-based batteries are rising in interest among researchers because of their utilization of more abundant, cost-effective charge carriers, includin...
(Keynote) On Interpretation of Impedance Spectroscopy Data
(Keynote) On Interpretation of Impedance Spectroscopy Data
Impedance spectroscopy represents a rich area of science that has been applied to many research disciplines, including those associated with corrosion and corrosion control, energy...
Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Higher energy density materials are being pushed by the research community to make lithium-ion batteries a better competitor to chemical fossil fuels for transport applications. Th...
Local Electrochemical Impedance Spectroscopy: Towards an Improvement in the Low Frequency Domain
Local Electrochemical Impedance Spectroscopy: Towards an Improvement in the Low Frequency Domain
The ability to probe surface reactivity at the local scale has led to a new understanding of the electrochemical reactivity in relation to the surface microstructure. Among the var...
(A03 Best Poster Winner) Chemically Preintercalated Bilayered Vanadium Oxides As Novel Cathode Materials for High Capacity K-Ion Batteries
(A03 Best Poster Winner) Chemically Preintercalated Bilayered Vanadium Oxides As Novel Cathode Materials for High Capacity K-Ion Batteries
As technology behind portable electronics, grid-scale energy storage, and electric vehicles advances, there is an increased dependence on rechargeable battery systems. Today, this ...
Monitoring of the SEI-Evolution of Uncoated and Carbon-Coated Si Nanoparticles By Transmission Electron Microscopy and Electrochemical Impedance Spectroscopy
Monitoring of the SEI-Evolution of Uncoated and Carbon-Coated Si Nanoparticles By Transmission Electron Microscopy and Electrochemical Impedance Spectroscopy
It is generally accepted that Li-ion batteries will become the most important energy storage solutions in the current energy transition, where hydrocarbons as privileged fuel are b...
Modeling active cell balancing of lithium-ion bat-teries in MATLAB/Simulink
Modeling active cell balancing of lithium-ion bat-teries in MATLAB/Simulink
Problem. The article is devoted to the study of active balancing of lithium-ion battery cells. Active balancing of lithium-ion battery cells is crucial for ensuring high efficiency...
The Electrochemical Impedance Spectroscopy Features of the Lithium Nickel Manganese Cobalt Oxide Based Lithium Ion Batteries During Cycling
The Electrochemical Impedance Spectroscopy Features of the Lithium Nickel Manganese Cobalt Oxide Based Lithium Ion Batteries During Cycling
Abstract
Electrochemical impedance spectroscopy (EIS) is a viable approach that can be used in lithium ion batteries (LIBs) to investigate the electrochemical behavi...

