Javascript must be enabled to continue!
PROPERTIES AND PERFORMANCE OF WATER TREATMENT SLUDGE (WTS)-CLAY BRICKS
View through CrossRef
Every year, large quantity of water treatment sludge (WTS) is produced from water treatment plant in Malaysia. Sanitary landfill disposal of sludge at authorized sites is the common practice in Malaysia. However, searching the suitable site for landfill is the major problem as the amount of sludge produced keeps on increasing. Reuse of the sludge could be an alternative to disposal. This study investigated the reusability of WTS as brick making material. The performance of clay-WTS bricks produced by mixing clay with different percentages of WTS with increments of 20% from 0% up to 100% was investigated. Each molded brick with optimum moisture content was pressed under constant pressure, oven-dried at 100˚C for 24 hours followed by heating at 600˚C for 2 hours and 1000˚C for 3 hours. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis were used to characterize clay, WTS and clay-WTS bricks. The performance of the bricks were evaluated with firing shrinkage, loss on ignition (LOI), water absorption, bulk density, and compressive strength tests. Increasing the sludge content results in a decrease of brick firing shrinkage, and increase of water absorption and compressive strength. The results revealed that the brick with 100% by weight of sludge could generate the highest compressive strength of 17.123N/mm2. It can be concluded that the bricks with 20 to 100% of water treatment sludge comply with the Malaysian Standard MS7.6:1972, which can fulfill the general requirement for usage of clay bricks in wall construction.
Penerbit UTM Press
Title: PROPERTIES AND PERFORMANCE OF WATER TREATMENT SLUDGE (WTS)-CLAY BRICKS
Description:
Every year, large quantity of water treatment sludge (WTS) is produced from water treatment plant in Malaysia.
Sanitary landfill disposal of sludge at authorized sites is the common practice in Malaysia.
However, searching the suitable site for landfill is the major problem as the amount of sludge produced keeps on increasing.
Reuse of the sludge could be an alternative to disposal.
This study investigated the reusability of WTS as brick making material.
The performance of clay-WTS bricks produced by mixing clay with different percentages of WTS with increments of 20% from 0% up to 100% was investigated.
Each molded brick with optimum moisture content was pressed under constant pressure, oven-dried at 100˚C for 24 hours followed by heating at 600˚C for 2 hours and 1000˚C for 3 hours.
Scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis were used to characterize clay, WTS and clay-WTS bricks.
The performance of the bricks were evaluated with firing shrinkage, loss on ignition (LOI), water absorption, bulk density, and compressive strength tests.
Increasing the sludge content results in a decrease of brick firing shrinkage, and increase of water absorption and compressive strength.
The results revealed that the brick with 100% by weight of sludge could generate the highest compressive strength of 17.
123N/mm2.
It can be concluded that the bricks with 20 to 100% of water treatment sludge comply with the Malaysian Standard MS7.
6:1972, which can fulfill the general requirement for usage of clay bricks in wall construction.
Related Results
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
BACKGROUND
Access to potable drinking water and sufficient sanitation continues to be an urgent global concern, particularly in developing regions where con...
Potential Use of Wastewater Treatment Plant Sludge in Fabrication of Burnt Clay Bricks
Potential Use of Wastewater Treatment Plant Sludge in Fabrication of Burnt Clay Bricks
Water treatment plants produce a huge amount of sludge, which are ultimately disposed to the nearest water channel, leading to harmful effects. This unmanaged wastewater treatment ...
Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Urbanization and modern development of expanding infrastructure have resulted in large construction activities. With the expeditious growth in the construction industry, the rate o...
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
From the regulatory perspectives, pulp and paper mill sludge management as a environmental issue is significant. The restricted of imported recycle paper is a problem for the pulp ...
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
From the regulatory perspectives, pulp and paper mill sludge management as a environmental issue is significant. The restricted of imported recycle paper is a problem for the pulp ...
MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE
MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE
Water treatment plant (WTP) sludge disposal is a major environmental concern that requires creative methods for management. In order to reduce the environmental impact of sludge di...
USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS
USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS
This paper discusses a possible solution regarding the final disposal of sludge from Sanitary Sewage Treatment Stations (ET), aiming at environmental preservation. The solid waste ...
Physico – mechanical properties of water treatment sludge – clay bricks
Physico – mechanical properties of water treatment sludge – clay bricks
This paper presents an experimental investigation on the utilization of drinking water treatment sludge (WTS) as a partial replacement for clay in clay brick manufacturing. Clay br...

