Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Physico – mechanical properties of water treatment sludge – clay bricks

View through CrossRef
This paper presents an experimental investigation on the utilization of drinking water treatment sludge (WTS) as a partial replacement for clay in clay brick manufacturing. Clay bricks were produced by substituting natural clay with WTS at replacement levels ranging from 0 to 60%, and firing at temperatures between 850 and 1050°C. The effects of WTS content and firing temperature on the physical and mechanical properties of the bricks were systematically evaluated. The results indicate that increasing WTS content leads to a reduction in bulk density and firing shrinkage, while water absorption and compressive strength of the clay bricks increase. At the optimal firing temperature of 1050°C, the brick sample containing 50% WTS exhibited the highest compressive strength of 23.1 MPa, which is approximately 2.3 times higher than that of the control sample. In addition, this composition showed a firing shrinkage of 3.05%, bulk density of 1.75 g/cm³, and water absorption of 13.2%, meeting the requirements for solid clay bricks according to TCVN 1451:1998. These findings demonstrate the significant potential of recycling water treatment sludge as a sustainable raw material in eco-friendly building materials and clay brick production.
Title: Physico – mechanical properties of water treatment sludge – clay bricks
Description:
This paper presents an experimental investigation on the utilization of drinking water treatment sludge (WTS) as a partial replacement for clay in clay brick manufacturing.
Clay bricks were produced by substituting natural clay with WTS at replacement levels ranging from 0 to 60%, and firing at temperatures between 850 and 1050°C.
The effects of WTS content and firing temperature on the physical and mechanical properties of the bricks were systematically evaluated.
The results indicate that increasing WTS content leads to a reduction in bulk density and firing shrinkage, while water absorption and compressive strength of the clay bricks increase.
At the optimal firing temperature of 1050°C, the brick sample containing 50% WTS exhibited the highest compressive strength of 23.
1 MPa, which is approximately 2.
3 times higher than that of the control sample.
In addition, this composition showed a firing shrinkage of 3.
05%, bulk density of 1.
75 g/cm³, and water absorption of 13.
2%, meeting the requirements for solid clay bricks according to TCVN 1451:1998.
These findings demonstrate the significant potential of recycling water treatment sludge as a sustainable raw material in eco-friendly building materials and clay brick production.

Related Results

Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Urbanization and modern development of expanding infrastructure have resulted in large construction activities. With the expeditious growth in the construction industry, the rate o...
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
From the regulatory perspectives, pulp and paper mill sludge management as a environmental issue is significant. The restricted of imported recycle paper is a problem for the pulp ...
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
Potensi Sludge dari Industri Kertas Sebagai Bahan Baku Chipboard
From the regulatory perspectives, pulp and paper mill sludge management as a environmental issue is significant. The restricted of imported recycle paper is a problem for the pulp ...
MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE
MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE
Water treatment plant (WTP) sludge disposal is a major environmental concern that requires creative methods for management. In order to reduce the environmental impact of sludge di...
USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS
USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS
This paper discusses a possible solution regarding the final disposal of sludge from Sanitary Sewage Treatment Stations (ET), aiming at environmental preservation. The solid waste ...
A Proposal for Recycling the World’s Unused Stockpiles of Treated Wastewater Sludge (Biosolids) in Fired-Clay Bricks
A Proposal for Recycling the World’s Unused Stockpiles of Treated Wastewater Sludge (Biosolids) in Fired-Clay Bricks
Millions of tonnes of leftover biosolids are increasingly stockpiled every year around the globe. Biosolids are a product of the wastewater sludge treatment process. Stockpiles nec...
PROPERTIES AND PERFORMANCE OF WATER TREATMENT SLUDGE (WTS)-CLAY BRICKS
PROPERTIES AND PERFORMANCE OF WATER TREATMENT SLUDGE (WTS)-CLAY BRICKS
Every year, large quantity of water treatment sludge (WTS) is produced from water treatment plant in Malaysia. Sanitary landfill disposal of sludge at authorized sites is the commo...

Back to Top