Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Fatigue life prediction of CFRP flat-fold-flat adhesive joints
View through CrossRef
Taking the flat-fold-flat (FJF) adhesive joints of carbon fiber reinforced bismaleimide resin-based composite materials as the object, the regularized fatigue life model and residual stiffness model of the one-way plate and the cohesive model parameters of the adhesive layer were fitted experimentally, and based on this, the fatigue life of the adhesive joint was predicted by ABAQUS software. The results show that under specific maximum load conditions, the predicted cracking life of the adhesive layer at the end of the lap joint and the final fatigue life are not greater than the error values of the test results 3% , which has a relatively good calculation accuracy. The cracking life of the adhesive layer at the end of the lap joint is approximately equal to the final fatigue life of the adhesive joint, indicating that the cracking of the adhesive layer at the end of the lap joint accounts for the main part of the total life of the adhesive joint, and the crack propagation life of the adhesive layer can be ignored.
Title: Fatigue life prediction of CFRP flat-fold-flat adhesive joints
Description:
Taking the flat-fold-flat (FJF) adhesive joints of carbon fiber reinforced bismaleimide resin-based composite materials as the object, the regularized fatigue life model and residual stiffness model of the one-way plate and the cohesive model parameters of the adhesive layer were fitted experimentally, and based on this, the fatigue life of the adhesive joint was predicted by ABAQUS software.
The results show that under specific maximum load conditions, the predicted cracking life of the adhesive layer at the end of the lap joint and the final fatigue life are not greater than the error values of the test results 3% , which has a relatively good calculation accuracy.
The cracking life of the adhesive layer at the end of the lap joint is approximately equal to the final fatigue life of the adhesive joint, indicating that the cracking of the adhesive layer at the end of the lap joint accounts for the main part of the total life of the adhesive joint, and the crack propagation life of the adhesive layer can be ignored.
Related Results
EFEKTIVITAS YOGA UNTUK MENGURANGI FATIGUE PADA PASIEN KANKER YANG MENJALANI KEMOTERAPI
EFEKTIVITAS YOGA UNTUK MENGURANGI FATIGUE PADA PASIEN KANKER YANG MENJALANI KEMOTERAPI
ABSTRAKLatar Belakang : Cancer Related Fatigue (CRF) adalah manifestasi klinis yang serius dan gejala umum yang dialami oleh pasien kanker. Fatigue adalah salah satu yang paling se...
The damage characteristics and mechanism of CFRP during laser joining of CFRP/mild steel dissimilar joint
The damage characteristics and mechanism of CFRP during laser joining of CFRP/mild steel dissimilar joint
This paper presents an investigation on the thermal damage characteristics and mechanism of carbon fiber reinforced polymer (CFRP) during fiber laser joining between CFRP and mild ...
Study on the tensile failure mechanisms of CFRP‐Al flat‐joggle‐flat bonded joints
Study on the tensile failure mechanisms of CFRP‐Al flat‐joggle‐flat bonded joints
AbstractThis paper focuses on CFRP‐Al bonded joints, experimentally investigating the effects of joint geometries, different types of adhesives, and overlap lengths on the mechanic...
SCF Equations for T/Y and K Square-to-Round Tubular Joint
SCF Equations for T/Y and K Square-to-Round Tubular Joint
Summary
A parametric stress analysis of T/Y and K square-to-round tubular joints subjected to axial loads and in-plane and out-of-plane bending moments has been p...
CFRP Mooring Lines For Modu Applications
CFRP Mooring Lines For Modu Applications
Abstract
Precise station keeping is a requirement of mobile offshore drilling units (MODUs) and production vessels operating in ultra-deepwater. DeepSea Engineeri...
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
AbstractThe retrofitting method using CFRP (Carbon Fiber Reinforced Plastic) plates was applied to a steel highway bridge in 2002 for the first time in Japan, where some of CFRP pl...
A Comparative Study of the Design Basis for Complex Tubular Joints
A Comparative Study of the Design Basis for Complex Tubular Joints
ABSTRACT
This paper describes a comparative study of the design basis for ring-stiffened, cast steel and internal grouted tubular joints. The current levels of kn...
Fatigue Strength Of Overlapping Tubular N-Joints
Fatigue Strength Of Overlapping Tubular N-Joints
ABSTRACT
The main objective of this study is to obtain the quantitative guidance for the fatigue design of saddle type tubular joints with overlapping braces on t...