Javascript must be enabled to continue!
Qualitative analysis of dentin surface modifications induced by Er, Cr: YSGG and Er: YAG laser for resin composite bonding
View through CrossRef
Abstract
Purpose
The aim of this study was to investigate the different dentin surfaces produced following their modification using Er, Cr: YSGG and Er: YAG lasers under different operating parameters.
Methods
Thirty-three sound, caries-free human third molars were collected and sectioned to expose flat dentin surfaces. Each specimen was polished and a 2 × 2 mm area was delineated for laser irradiation. The samples were divided into eleven groups according to laser type, irradiation time, tip diameter, and mode of application. Er: YAG laser irradiation was performed in non-contact mode for 30 s, 1 min, and 2 min, while Er, Cr: YSGG laser irradiation was applied in contact mode using different tips and exposure times. Control groups included untreated dentin and dentin etched with 37% phosphoric acid. All specimens were prepared for scanning electron microscopy (SEM) and qualitatively analyzed for surface morphology and elemental composition (Ca and P).
Results
Dentin surfaces irradiated with the Er, Cr: YSGG laser exhibited rough, smear layer–free surfaces with enlarged dentinal tubules, particularly after 30 s and 1 min of irradiation. Prolonged irradiation (2 min) with either laser resulted in excessively rough, irregular surfaces with cracks, craters and smear layer formation. Er: YAG-treated dentin showed pronounced surface irregularities and smear layer presence, with limited tubule opening even at shorter irradiation times. Elemental analysis revealed significant differences in calcium and phosphorus content among groups (
p
< 0.05).
Conclusions
Both Er, Cr: YSGG and Er: YAG lasers are capable of modifying qualitatively the morphological appearance of the dentin surface in a different but comparable manner with phosphoric acid etching when appropriate parameters are selected.
Springer Science and Business Media LLC
Title: Qualitative analysis of dentin surface modifications induced by Er, Cr: YSGG and Er: YAG laser for resin composite bonding
Description:
Abstract
Purpose
The aim of this study was to investigate the different dentin surfaces produced following their modification using Er, Cr: YSGG and Er: YAG lasers under different operating parameters.
Methods
Thirty-three sound, caries-free human third molars were collected and sectioned to expose flat dentin surfaces.
Each specimen was polished and a 2 × 2 mm area was delineated for laser irradiation.
The samples were divided into eleven groups according to laser type, irradiation time, tip diameter, and mode of application.
Er: YAG laser irradiation was performed in non-contact mode for 30 s, 1 min, and 2 min, while Er, Cr: YSGG laser irradiation was applied in contact mode using different tips and exposure times.
Control groups included untreated dentin and dentin etched with 37% phosphoric acid.
All specimens were prepared for scanning electron microscopy (SEM) and qualitatively analyzed for surface morphology and elemental composition (Ca and P).
Results
Dentin surfaces irradiated with the Er, Cr: YSGG laser exhibited rough, smear layer–free surfaces with enlarged dentinal tubules, particularly after 30 s and 1 min of irradiation.
Prolonged irradiation (2 min) with either laser resulted in excessively rough, irregular surfaces with cracks, craters and smear layer formation.
Er: YAG-treated dentin showed pronounced surface irregularities and smear layer presence, with limited tubule opening even at shorter irradiation times.
Elemental analysis revealed significant differences in calcium and phosphorus content among groups (
p
< 0.
05).
Conclusions
Both Er, Cr: YSGG and Er: YAG lasers are capable of modifying qualitatively the morphological appearance of the dentin surface in a different but comparable manner with phosphoric acid etching when appropriate parameters are selected.
Related Results
Comparison between Shear Bond Strength of Er:YAG and Er,Cr:YSGG Lasers-Assisted Dentinal Adhesion of Self-Adhering Resin Composite: An Ex Vivo Study
Comparison between Shear Bond Strength of Er:YAG and Er,Cr:YSGG Lasers-Assisted Dentinal Adhesion of Self-Adhering Resin Composite: An Ex Vivo Study
(1) Background: Bonding composite to tooth structure is still evolving with a substitute for phosphoric acid being the main challenge. Lately, a self-adhering composite (SAC) was d...
Evaluation of Four Different Adhesive Systems’ Bonding Strength Between Superficial and Deep Dentin
Evaluation of Four Different Adhesive Systems’ Bonding Strength Between Superficial and Deep Dentin
The success of adhesive restorations largely depends on the optimal bond strength between the tooth structure and the restorative material. The aim of this study was to evaluate th...
Effect of substrate and adhesive system type on composite resin restorations
Effect of substrate and adhesive system type on composite resin restorations
Although it is possible to obtain a reliable bond between enamel and composite resin, the ideal bonding method of composite resin to dentin still needs to be developed. Variables s...
Adhesion of Resin-Resin and Resin–Lithium Disilicate Ceramic: A Methodological Assessment
Adhesion of Resin-Resin and Resin–Lithium Disilicate Ceramic: A Methodological Assessment
The aim of this study was to evaluate four test methods on the adhesion of resin composite to resin composite, and resin composite to glass ceramic. Resin composite specimens (N = ...
EFFECT OF DIFFERENT SALIVA DECONTAMINATION PROCEDURES ON THE SHEAR BOND STRENGTH OF A UNIVERSAL EIGHTH GENERATION ADHESIVE SYSTEM TO DENTIN AFTER POLYMERIZATION - AN IN VITRO STUDY
EFFECT OF DIFFERENT SALIVA DECONTAMINATION PROCEDURES ON THE SHEAR BOND STRENGTH OF A UNIVERSAL EIGHTH GENERATION ADHESIVE SYSTEM TO DENTIN AFTER POLYMERIZATION - AN IN VITRO STUDY
Aim: To evaluate and compare the effect of saliva decontamination procedure on the shear bond strength of a Universal eighth generation adhesive system to dentin after polymerizati...
Effect of Different Disinfection Protocols on The Resin Bond Strength to Dentin: In Vitro Study.
Effect of Different Disinfection Protocols on The Resin Bond Strength to Dentin: In Vitro Study.
Abstract
Antimicrobial photodynamic therapy (aPDT) can be adopted as a modality for bacterial decontamination before cavity restoration to decrease the risk of secondary ca...
Surface Roughness of Er, Cr: YSGG Laser Etched Enamel Compared to Acid Etching: An In Vitro Study
Surface Roughness of Er, Cr: YSGG Laser Etched Enamel Compared to Acid Etching: An In Vitro Study
Objectives:
Erbium-based lasers have been used in dentistry with different parameters for enamel conditioning with controversial results on the optimum parameter. This st...
Evaluation of Lithium Disilicate Surface Morphology Treated with Er,Cr:YSGG and Fractional CO2 Laser
Evaluation of Lithium Disilicate Surface Morphology Treated with Er,Cr:YSGG and Fractional CO2 Laser
Abstract: The use of indirect, all-ceramic restorations has grown in popularity among dentists. Studies have demonstrated that for indirect ceramic restorations to be effective ove...

