Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

High-Performance PEEK/MWCNT Nanocomposites: Combining Enhanced Electrical Conductivity and Nanotube Dispersion

View through CrossRef
High-performance engineering thermoplastics offer lightweight and excellent mechanical performance in a wide temperature range. Their composites with carbon nanotubes are expected to enhance mechanical performance, while providing thermal and electrical conductivity. These are interesting attributes that may endow additional functionalities to the nanocomposites. The present work investigates the optimal conditions to prepare polyether ether ketone (PEEK)/multi-walled carbon nanotube (MWCNT) nanocomposites, minimizing the MWCNT agglomerate size while maximizing the nanocomposite electrical conductivity. The aim is to achieve PEEK/MWCNT nanocomposites that are suitable for melt-spinning of electrically conductive multifilament’s. Nanocomposites were prepared with compositions ranging from 0.5 to 7 wt.% MWCNT, showing an electrical percolation threshold between 1 and 2 wt.% MWCNT (107–102 S/cm) and a rheological percolation in the same range (1 to 2 wt.% MWCNT), confirming the formation of an MWCNT network in the nanocomposite. Considering the large drop in electrical conductivity typically observed during melt-spinning and the drawing of filaments, the composition PEEK/5 wt.% MWCNT was selected for further investigation. The effect of the melt extrusion parameters, namely screw speed, temperature, and throughput, was studied by evaluating the morphology of MWCNT agglomerates, the nanocomposite rheology, and electrical properties. It was observed that the combination of the higher values of screw speed and temperature profile leads to the smaller number of MWCNT agglomerates with smaller size, albeit at a slightly lower electrical conductivity. Generally, all processing conditions tested yielded nanocomposites with electrical conductivity in the range of 0.50–0.85 S/cm. The nanocomposite processed at higher temperature and screw speed presented the lowest value of elastic modulus, perhaps owing to higher matrix degradation and lower connectivity between the agglomerates. From all the process parameters studied, the screw speed was identified to have the higher impact on nanocomposite properties.
Title: High-Performance PEEK/MWCNT Nanocomposites: Combining Enhanced Electrical Conductivity and Nanotube Dispersion
Description:
High-performance engineering thermoplastics offer lightweight and excellent mechanical performance in a wide temperature range.
Their composites with carbon nanotubes are expected to enhance mechanical performance, while providing thermal and electrical conductivity.
These are interesting attributes that may endow additional functionalities to the nanocomposites.
The present work investigates the optimal conditions to prepare polyether ether ketone (PEEK)/multi-walled carbon nanotube (MWCNT) nanocomposites, minimizing the MWCNT agglomerate size while maximizing the nanocomposite electrical conductivity.
The aim is to achieve PEEK/MWCNT nanocomposites that are suitable for melt-spinning of electrically conductive multifilament’s.
Nanocomposites were prepared with compositions ranging from 0.
5 to 7 wt.
% MWCNT, showing an electrical percolation threshold between 1 and 2 wt.
% MWCNT (107–102 S/cm) and a rheological percolation in the same range (1 to 2 wt.
% MWCNT), confirming the formation of an MWCNT network in the nanocomposite.
Considering the large drop in electrical conductivity typically observed during melt-spinning and the drawing of filaments, the composition PEEK/5 wt.
% MWCNT was selected for further investigation.
The effect of the melt extrusion parameters, namely screw speed, temperature, and throughput, was studied by evaluating the morphology of MWCNT agglomerates, the nanocomposite rheology, and electrical properties.
It was observed that the combination of the higher values of screw speed and temperature profile leads to the smaller number of MWCNT agglomerates with smaller size, albeit at a slightly lower electrical conductivity.
Generally, all processing conditions tested yielded nanocomposites with electrical conductivity in the range of 0.
50–0.
85 S/cm.
The nanocomposite processed at higher temperature and screw speed presented the lowest value of elastic modulus, perhaps owing to higher matrix degradation and lower connectivity between the agglomerates.
From all the process parameters studied, the screw speed was identified to have the higher impact on nanocomposite properties.

Related Results

Effect of Amide Functionalization and Precuring on Tensile Properties of MWCNT/Epoxy Nanocomposites
Effect of Amide Functionalization and Precuring on Tensile Properties of MWCNT/Epoxy Nanocomposites
SummaryThe development of multi‐walled carbon nanotube (MWCNT)‐epoxy nanocomposites, for structural polymeric composites, has various problems that could decrease their mechanical ...
Comparison and analysis of measurements for crystallinity of PEEK and CF/PEEK composites
Comparison and analysis of measurements for crystallinity of PEEK and CF/PEEK composites
AbstractPEEK and CF/PEEK are two significant materials whose properties are intricately linked to their crystallization behavior. This study employed three analytical techniques—de...
Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites
Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites
AbstractThe effects of processing conditions on the microstructure and properties of polypropylene/multiwalled carbon nanotube (PP/MWCNT) and polycarbonate/multiwalled carbon nanot...
Análisis de fatiga y flexión sobre implantes monoblock de PEEK y la unión pilar PEEK-implante de titanio
Análisis de fatiga y flexión sobre implantes monoblock de PEEK y la unión pilar PEEK-implante de titanio
En este trabajo de tesis doctoral se analizaron las fuerzas de flexión y fatiga sobre implantes dentales monoblock de PEEK y también la unión pilar PEEK - implante de titanio es un...
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
ABSTRACT Proppant conductivity was usually measured under static or designed proppant concentration. The ISO 13503-5 standard provides specific experimental proce...

Back to Top