Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Effects of rotor–rotor interaction for a small tandem rotor operating in a crosswind

View through CrossRef
This study investigates the effects of rotor–rotor interaction on the wake and thrust characteristics of a small tandem rotor operating in a crosswind. Flow velocity and force measurements were conducted in a wind tunnel with two rotors arranged parallel to a crosswind. The results show that the rotor–rotor interaction significantly influences the wake characteristics and thrust generations of the tandem rotor and its effects vary depending on the crosswind speed and distance between rotor tips. In the tandem rotor configuration, the front rotor wake prevents the crosswind flow from reaching the rear rotor wake, thereby reducing the crosswind influence on it. However, under the strong rotor–rotor interaction, such as that caused by high crosswind speeds and short distances between rotor tips, the wakes of both rotors collide with each other and rapidly break down as they proceed downward. Tip-vortex characteristics are also affected by rotor–rotor interaction, which is investigated in terms of variations in the time-averaged tip-vortex trajectory and dissipation ratio with the strength of rotor–rotor interaction. These wake variations by rotor–rotor interaction lead to a decrease in thrust coefficients of the front and rear rotors, with a more significant reduction observed for the rear rotor. The thrust of the rear rotor is more significantly reduced as the crosswind speed increases and the distance between rotor tips narrows. This is mainly attributed to the increased axially induced velocity near the leading tips on the advancing side, retreating side, and centerline.
Title: Effects of rotor–rotor interaction for a small tandem rotor operating in a crosswind
Description:
This study investigates the effects of rotor–rotor interaction on the wake and thrust characteristics of a small tandem rotor operating in a crosswind.
Flow velocity and force measurements were conducted in a wind tunnel with two rotors arranged parallel to a crosswind.
The results show that the rotor–rotor interaction significantly influences the wake characteristics and thrust generations of the tandem rotor and its effects vary depending on the crosswind speed and distance between rotor tips.
In the tandem rotor configuration, the front rotor wake prevents the crosswind flow from reaching the rear rotor wake, thereby reducing the crosswind influence on it.
However, under the strong rotor–rotor interaction, such as that caused by high crosswind speeds and short distances between rotor tips, the wakes of both rotors collide with each other and rapidly break down as they proceed downward.
Tip-vortex characteristics are also affected by rotor–rotor interaction, which is investigated in terms of variations in the time-averaged tip-vortex trajectory and dissipation ratio with the strength of rotor–rotor interaction.
These wake variations by rotor–rotor interaction lead to a decrease in thrust coefficients of the front and rear rotors, with a more significant reduction observed for the rear rotor.
The thrust of the rear rotor is more significantly reduced as the crosswind speed increases and the distance between rotor tips narrows.
This is mainly attributed to the increased axially induced velocity near the leading tips on the advancing side, retreating side, and centerline.

Related Results

Crosswind aerodynamics of low pressure ratio fans
Crosswind aerodynamics of low pressure ratio fans
Ultra-high bypass ratio (UHBPR) turbofans offer significant reductions in fuel burn and pollutant emissions due to their higher propulsive efficiency. To minimise drag and weight p...
Analysis of the Aerodynamic Characteristics of Small-Sized Car Vehicles under the Influence of Steady Crosswind
Analysis of the Aerodynamic Characteristics of Small-Sized Car Vehicles under the Influence of Steady Crosswind
The crosswind is one of the factors that can lead to a car accident. Crosswind is defined as a side force that causes a vehicle to become unstable and deviate from its desired path...
Flow Dynamics of a Subsonic Axial Compressor Rotor With Leaned Tandem Blades
Flow Dynamics of a Subsonic Axial Compressor Rotor With Leaned Tandem Blades
Abstract For higher diffusion, tandem blading has demonstrated performance superiority over a conventional blade. Modern compressor blades are often designed with th...
Investigations on Unsteady Flow Structure Formation in Tandem Bladed Axial Flow Compressor Stage
Investigations on Unsteady Flow Structure Formation in Tandem Bladed Axial Flow Compressor Stage
Abstract The axial compressors suffer from the risk of flow separation upon increasing the loading beyond a certain limit due to increased boundary layer thickness o...
Impact of Main Rotor Tip Geometry on Main Rotor/Tail Rotor Interaction in Hover
Impact of Main Rotor Tip Geometry on Main Rotor/Tail Rotor Interaction in Hover
One area that has been identified as affording increased operational efficiency in future rotary wing aircraft is that of improved Main Rotor/Tail Rotor/airframe interaction in hov...
An Optimal CFD Strategy for Intake in Crosswind Conditions
An Optimal CFD Strategy for Intake in Crosswind Conditions
Abstract Crosswind can reduce the operability of an aeroengine significantly at static or near static operating conditions. CFD predictions of the flow at crosswind ...
Numerical Study of the Crosswind Effect on Booster Compressor Cooler Fan Performance for the Wellhead Platform
Numerical Study of the Crosswind Effect on Booster Compressor Cooler Fan Performance for the Wellhead Platform
Abstract The wellhead booster compressor (BC) is a crucial machinery component utilized for pressure recovery in production. In Greater Bongkot North field (GBN), th...
Numerical Simulation on Temperature and Moisture Fields Around Cooling Towers Used in Mine Ventilation System
Numerical Simulation on Temperature and Moisture Fields Around Cooling Towers Used in Mine Ventilation System
For heat rejection, small air-cooling towers are widely used in mine ventilation systems. However, the thermal efficiency of the cooling towers can be significantly affected by the...

Back to Top