Javascript must be enabled to continue!
Evaluation of Water Saturation in a Low-Resistivity Pay Carbonate Reservoir Onshore Abu Dhabi: An Integrated Approach
View through CrossRef
Abstract
Characterization and fluid quantification of Carbonate reservoirs looks more challenging than those of sandstone reservoirs. The determination of accurate hydrocarbon saturation is more tasking due to their complex and heterogeneous pore structures, and mineralogy. Traditionally, resistivity logs are used to identify pay intervals due to the resistivity contrast between oil and water. However, when pay intervals exhibit low resistivity, such logs exhibit low confidence in the precise determination of the hydrocarbon saturation. Few Middle-Eastern reservoirs are categorized as low resistivity pay, where resistivity based log analysis results in high water saturation. However, downhole fluid analysis identifies mobile oil, and the formation flows dry or nearly dry oil during production tests. This makes resistivity based saturation computation questionable.
Because of the complexity of low resistivity pay (LRP), its cause should be determined prior to applying a solution. Several reasons were identified to be responsible for this phenomenon- among which are the presence of micro-porosity, fractures, paramagnetic minerals, and deep conductive borehole mud invasion. Integration of Thin section, Nuclear magnetic resonance (NMR) and Mercury injection capillary pressure (MICP) data from the studied formation indicated the presence of micropores network.
This paper discusses the observed variations in quantifying water saturation in LRP interval and the related discrepancies between the resistivity and non-resistivity based techniques. The non-resistivity based methods, used in the course of this study, are coined from sigma log measurement and core data, either capillary pressure-based (MICP, Centrifuge, and Porous plate), or direct from Dean-Stark measurements. The interpretation process considered water saturation derived from resistivity measurement and core data combined with production test information.
The combination of several water saturation determination approaches captured the uncertainty and improved our understanding of the reservoir properties. This enhanced our capability to develop a robust and reliable saturation model. The integration of data from these various sources added confidence to the estimation of water saturation in the studied field and thus, improved reserves estimation and reservoir simulation for accurate history matching, production forecasting and optimized field development plan.
Title: Evaluation of Water Saturation in a Low-Resistivity Pay Carbonate Reservoir Onshore Abu Dhabi: An Integrated Approach
Description:
Abstract
Characterization and fluid quantification of Carbonate reservoirs looks more challenging than those of sandstone reservoirs.
The determination of accurate hydrocarbon saturation is more tasking due to their complex and heterogeneous pore structures, and mineralogy.
Traditionally, resistivity logs are used to identify pay intervals due to the resistivity contrast between oil and water.
However, when pay intervals exhibit low resistivity, such logs exhibit low confidence in the precise determination of the hydrocarbon saturation.
Few Middle-Eastern reservoirs are categorized as low resistivity pay, where resistivity based log analysis results in high water saturation.
However, downhole fluid analysis identifies mobile oil, and the formation flows dry or nearly dry oil during production tests.
This makes resistivity based saturation computation questionable.
Because of the complexity of low resistivity pay (LRP), its cause should be determined prior to applying a solution.
Several reasons were identified to be responsible for this phenomenon- among which are the presence of micro-porosity, fractures, paramagnetic minerals, and deep conductive borehole mud invasion.
Integration of Thin section, Nuclear magnetic resonance (NMR) and Mercury injection capillary pressure (MICP) data from the studied formation indicated the presence of micropores network.
This paper discusses the observed variations in quantifying water saturation in LRP interval and the related discrepancies between the resistivity and non-resistivity based techniques.
The non-resistivity based methods, used in the course of this study, are coined from sigma log measurement and core data, either capillary pressure-based (MICP, Centrifuge, and Porous plate), or direct from Dean-Stark measurements.
The interpretation process considered water saturation derived from resistivity measurement and core data combined with production test information.
The combination of several water saturation determination approaches captured the uncertainty and improved our understanding of the reservoir properties.
This enhanced our capability to develop a robust and reliable saturation model.
The integration of data from these various sources added confidence to the estimation of water saturation in the studied field and thus, improved reserves estimation and reservoir simulation for accurate history matching, production forecasting and optimized field development plan.
Related Results
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
Potable Water Sources, Household Hygiene, and Sanitation Practices in Ikpoba Okha LGA, Edo State: Implications for Public Health and Sustainable Water Management
Omoregie, Andrew Edosa.1 Omoregie Abieyuwa Peace2 Okoro, Enyinnaya Okoro.3
1 College of Medi
BACKGROUND
Access to potable drinking water and sufficient sanitation continues to be an urgent global concern, particularly in developing regions where con...
Prediction of High Pressure Formation Salt Water Flow in Deep Drilling in Abu Dhabi Area
Prediction of High Pressure Formation Salt Water Flow in Deep Drilling in Abu Dhabi Area
ABSTRACT
Deep drilling of Permo-Triassic / Palaeozoic section in Abu Dhabi area is, generally, costly and risky: Many unforeseen problems were encountered while d...
An Integrated Approach to Calculate Vertical and Horizontal Resistivity Utilizing Conventional Logs in Low Resistivity Pay Reservoirs in Gulf of Suez: Case Study
An Integrated Approach to Calculate Vertical and Horizontal Resistivity Utilizing Conventional Logs in Low Resistivity Pay Reservoirs in Gulf of Suez: Case Study
The occurrence of Low Resistivity Pay (LRP) have been widely reported. The conventional induction resistivity log does not recognized LRP, because this phenomenon affects the conve...
Source Rocks of the Thamama Hydrocarbon in Abu Dhabi
Source Rocks of the Thamama Hydrocarbon in Abu Dhabi
Abstract
More than 80% of Abu Dhabi oil reserves are accumulated in the Thamama reservoirs. However, its source rock locations, thickness and richness distributions ...
An Approach to Determining Water Saturation in Shaly Sands
An Approach to Determining Water Saturation in Shaly Sands
Abstract
Fresh waters and the presence of clay in many Rocky Mountain and West Coast sands require special methods of log analysis. Archie's saturation equation r...
A New Method for Identifying Low-Resistivity Gas Zones, High-Resistivity Water Zones, and Water-Flooded Layers Based on SP and Array Induction Resistivity
A New Method for Identifying Low-Resistivity Gas Zones, High-Resistivity Water Zones, and Water-Flooded Layers Based on SP and Array Induction Resistivity
Abstract
The identification of oil, gas, water and water-flooded zones is one of the main tasks in well logging processing and interpretation, and its accuracy di...
Genetic mechanisms and multi-parameter logging identification of low-resistivity oil pay: A case study of the Triassic Chang 6 member, Zhidan area, Ordos Basin, China
Genetic mechanisms and multi-parameter logging identification of low-resistivity oil pay: A case study of the Triassic Chang 6 member, Zhidan area, Ordos Basin, China
Abstract
Low-resistivity pay have been found throughout the world, the identification and characterization of low-resistivity pay is very challenging and important for the ...
Experimental Study on the Change of Resistivity of Synthetic Methane Hydrate Under Different Saturation and Clay Composition Conditions
Experimental Study on the Change of Resistivity of Synthetic Methane Hydrate Under Different Saturation and Clay Composition Conditions
The electric characteristics of a hydrate reservoir are the basis for evaluating porosity and saturation. Because drilling hydrate core samples are unstable at ambient temperature ...

