Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Finite Element Analysis of Composite Repair for Damaged Steel Pipeline

View through CrossRef
Carbon fiber reinforced polymer (CFRP) matrix composite overwrap repair systems have been introduced and accepted as an alternative repair system for steel pipeline. This paper aimed to evaluate the mechanical behavior of damaged steel pipeline with CFRP repair using finite element (FE) analysis. Two different repair strategies, namely wrap repair and patch repair, were considered. The mechanical responses of pipeline with the composite repair system under the maximum allowable operating pressure (MAOP) was analyzed using the validated FE models. The design parameters of the CFRP repair system were analyzed, including patch/wrap size and thickness, defect size, interface bonding, and the material properties of the infill material. The results show that both the stress in the pipe wall and CFRP could be reduced by using a thicker CFRP. With the increase in patch size in the hoop direction, the maximum von Mises stress in the pipe wall generally decreased as the maximum hoop stress in the CFRP increased. The reinforcement of the CFRP repair system could be enhanced by using infill material with a higher elastic modulus. The CFRP patch tended to cause higher interface shear stress than CFRP wrap, but the shear stress could be reduced by using a thicker CFRP. Compared with the fully bonded condition, the frictional interface causes a decrease in hoop stress in the CFRP but an increase in von Mises stress in the steel. The study results indicate the feasibility of composite repair for damaged steel pipeline.
Title: Finite Element Analysis of Composite Repair for Damaged Steel Pipeline
Description:
Carbon fiber reinforced polymer (CFRP) matrix composite overwrap repair systems have been introduced and accepted as an alternative repair system for steel pipeline.
This paper aimed to evaluate the mechanical behavior of damaged steel pipeline with CFRP repair using finite element (FE) analysis.
Two different repair strategies, namely wrap repair and patch repair, were considered.
The mechanical responses of pipeline with the composite repair system under the maximum allowable operating pressure (MAOP) was analyzed using the validated FE models.
The design parameters of the CFRP repair system were analyzed, including patch/wrap size and thickness, defect size, interface bonding, and the material properties of the infill material.
The results show that both the stress in the pipe wall and CFRP could be reduced by using a thicker CFRP.
With the increase in patch size in the hoop direction, the maximum von Mises stress in the pipe wall generally decreased as the maximum hoop stress in the CFRP increased.
The reinforcement of the CFRP repair system could be enhanced by using infill material with a higher elastic modulus.
The CFRP patch tended to cause higher interface shear stress than CFRP wrap, but the shear stress could be reduced by using a thicker CFRP.
Compared with the fully bonded condition, the frictional interface causes a decrease in hoop stress in the CFRP but an increase in von Mises stress in the steel.
The study results indicate the feasibility of composite repair for damaged steel pipeline.

Related Results

Installation Analysis of Matterhorn Pipeline Replacement
Installation Analysis of Matterhorn Pipeline Replacement
Abstract The paper describes the installation analysis for the Matterhorn field pipeline replacement, located in water depths between 800-ft to 1200-ft in the Gul...
EFFECT OF PUTTY PROPERTIES IN REPAIRING CORRODED PIPELINE: A FINITE ELEMENT ANALYSIS
EFFECT OF PUTTY PROPERTIES IN REPAIRING CORRODED PIPELINE: A FINITE ELEMENT ANALYSIS
Underground pipelines are the most preferable way to transport oil and gas over a long distance. These steel pipelines often suffered from several deteriorations including corrosio...
Concomitant Medial Meniscal Root Repair with Extrusion Repair (Centralization Technique)
Concomitant Medial Meniscal Root Repair with Extrusion Repair (Centralization Technique)
Background: Meniscal extrusion is a phenomenon in which a degenerative posterior horn tear, radial tear, or root tear results in displacement of the body of the meniscu...
First Arctic Subsea Pipelines Moving to Reality
First Arctic Subsea Pipelines Moving to Reality
Abstract Two offshore development projects which involve subsea arctic pipelines are being proposed by British Petroleum Exploration (BP). Both projects are locat...
Modal and stress behavioral for CFRP composite lifting lug
Modal and stress behavioral for CFRP composite lifting lug
Purpose In the present study, a steel lifting lug is replaced with a composite (carbon fiber-reinforced epoxy [CFRP]) lifting lug made of a carbon/epoxy composite. The purpose of t...
Replacement of a Damaged Diagonal Bracing in a Semisubmersible Drilling Rig
Replacement of a Damaged Diagonal Bracing in a Semisubmersible Drilling Rig
Abstract Due to the collision with a supply boat one of the bracings of the semi submersible drilling rig "West venture" was badly damaged calculation of residual...
Development and Use of Simulation Trainers for Pipeline Controllers
Development and Use of Simulation Trainers for Pipeline Controllers
Enbridge is in the forefront of development and application of computer simulation based training systems for Pipeline Controllers. Since 1985, the Pipeline Dynamics section of Enb...

Back to Top