Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

EFFECT OF FLOW STEERING ANGLE TOWARD THE HYDROKINETIC TURBINE PERFORMANCE

View through CrossRef
The kinetic turbine is one of the solutions for use in low-speed river flows ranging from 0.01–2.8 m/s. This kinetic turbine is used as a conversion equipment to convert the water kinetic energy into an electrical energy. The working principle of a kinetic turbine is utilizing and relies on the water kinetic energy. Water flowing into the turbine area will produce a momentum on the turbine blades. This momentum change would then push the turbine blades and finally spin the turbine runner. The aim of research is thedetermination of the effect of water flow steering angle (a) and water flow rate variation in the kinetic turbine performance. This research uses vertical axis kinetic turbines with eight curve blade attached to the turbine runner. The variables used are two values of water flow steering angle, namely 25°and 35°. The water flow rate variation of 30 m3/h, 35 m3/h, 40 m3/h and 45 m3/h. The method used in this study uses a real experimental method. These two variations would then compare with the result of a hydrokinetic turbine performance done on the previous research. The results show that the water flow steering angle a affected the kinetic turbine performance (power, efficiency and torque). From these several water flow steering angle and water flow rate variations, the turbine performance with a 35° water flow steering angle get the highest performance compared with the use of 25° and 14° water flow steering angle. The greater the flow angle and the greater the water flow rate, the greater the torque, power and efficiency. The highest turbine power produced, P=17.5 W, occurs on the 35° water steering angle, and on a Q=45 m3/h water flow rate and on a 80 rpm turbine rotation. While the highest turbine efficiency, h=27 %, occurred on the Q=30 m3/h water flow rate, on a 60 rpm turbine rotation and on a water flow steering angle a=35°. The highest turbine torque, 3.1 Nm, occurs at Q=45 m3/h water flow rate at a maximum turbine braking and on a water steering angle a=35°.
Title: EFFECT OF FLOW STEERING ANGLE TOWARD THE HYDROKINETIC TURBINE PERFORMANCE
Description:
The kinetic turbine is one of the solutions for use in low-speed river flows ranging from 0.
01–2.
8 m/s.
This kinetic turbine is used as a conversion equipment to convert the water kinetic energy into an electrical energy.
The working principle of a kinetic turbine is utilizing and relies on the water kinetic energy.
Water flowing into the turbine area will produce a momentum on the turbine blades.
This momentum change would then push the turbine blades and finally spin the turbine runner.
The aim of research is thedetermination of the effect of water flow steering angle (a) and water flow rate variation in the kinetic turbine performance.
This research uses vertical axis kinetic turbines with eight curve blade attached to the turbine runner.
The variables used are two values of water flow steering angle, namely 25°and 35°.
The water flow rate variation of 30 m3/h, 35 m3/h, 40 m3/h and 45 m3/h.
The method used in this study uses a real experimental method.
These two variations would then compare with the result of a hydrokinetic turbine performance done on the previous research.
The results show that the water flow steering angle a affected the kinetic turbine performance (power, efficiency and torque).
From these several water flow steering angle and water flow rate variations, the turbine performance with a 35° water flow steering angle get the highest performance compared with the use of 25° and 14° water flow steering angle.
The greater the flow angle and the greater the water flow rate, the greater the torque, power and efficiency.
The highest turbine power produced, P=17.
5 W, occurs on the 35° water steering angle, and on a Q=45 m3/h water flow rate and on a 80 rpm turbine rotation.
While the highest turbine efficiency, h=27 %, occurred on the Q=30 m3/h water flow rate, on a 60 rpm turbine rotation and on a water flow steering angle a=35°.
The highest turbine torque, 3.
1 Nm, occurs at Q=45 m3/h water flow rate at a maximum turbine braking and on a water steering angle a=35°.

Related Results

Impact of Individual High-Pressure Turbine Rotor Purge Flows on Turbine Center Frame Aerodynamics
Impact of Individual High-Pressure Turbine Rotor Purge Flows on Turbine Center Frame Aerodynamics
This paper presents an experimental study of the impact of individual high-pressure turbine purge flows on the main flow in a downstream turbine center frame duct. Measurements wer...
Hydrokinetic resource assessment for the Canadian Arctic
Hydrokinetic resource assessment for the Canadian Arctic
Increasing renewable energy development has rekindled interest in hydrokinetic or in-stream river potential for power production using zero head turbines. This is also of interest ...
Performance Improvement of Savonius Hydrokinetic Turbine Using Upstream Crescent Shape Deflector
Performance Improvement of Savonius Hydrokinetic Turbine Using Upstream Crescent Shape Deflector
Abstract The use of non-renewable sources such as coal, natural gas, and oil for energy generation has caused negative environmental impacts. In response, clean and sustain...
Computational Fluid Dynamics Study of Wake Recovery for Flow Across Hydrokinetic Turbine at Different Depth of Water
Computational Fluid Dynamics Study of Wake Recovery for Flow Across Hydrokinetic Turbine at Different Depth of Water
Depletion of fossil fuel caused mankind to look for sustainable and green energy resources. The characteristic of hydrokinetic turbine with ability to operate at low head stream an...
Effects of steering of tracked combine harvester on shear damage of paddy field soil
Effects of steering of tracked combine harvester on shear damage of paddy field soil
During steering, the slide and slip of the tracked combine harvester relative to the ground will cause serious shear damage to the soil and reduce the steering performance of the v...
ANALISA PEMBEBANAN STATIK PADA RANCANGAN STEERING KNUCKLE MOBIL LISTRIK GANESHA SAKTI (GASKI)
ANALISA PEMBEBANAN STATIK PADA RANCANGAN STEERING KNUCKLE MOBIL LISTRIK GANESHA SAKTI (GASKI)
Steering knuckle merupakan komponen yang penting dalam sebuah kendaraan roda empat yang berfungsi untuk menahan beban yang diberikan pada masing – masing roda depan, dan berfungsi ...
A Solution for Improving Gas Turbine Performance Degradation and Emissions: The “GT Auto Tuner” Product
A Solution for Improving Gas Turbine Performance Degradation and Emissions: The “GT Auto Tuner” Product
Abstract The main causes of gas turbine performance degradation in natural gas combined cycle power plants are corrosion, fouling, and high turbine inlet temperature...
Cavitation Inception on Hydrokinetic Turbine Blades Shrouded by Diffuser
Cavitation Inception on Hydrokinetic Turbine Blades Shrouded by Diffuser
Diffuser technology placed around hydrokinetic rotors may improve the conversion of the fluid’s kinetic energy into shaft power. However, rotor blades are susceptible to the phenom...

Back to Top