Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Making Wafer Bonding Viable for Mass Production
View through CrossRef
AbstractDirect wafer bonding was performed under medium vacuum condition. High bonding strength (larger than 20 MPa) is achieved at the bonding temperature of only 400°C, and the annealing time for complete bonding is less than 5 hours. The bonding efficiency (percentage of the bonded area over entire wafer area) of the medium vacuum wafer bonding (MVWB) is also found to be better than the traditional wafer bonding.Qualitative description of the mechanism of MVWB is proposed in present work. It is believed that the medium vacuum can enhance the out-diffusion of the water molecules and other trapped impurities through the bonding interface which is porous initially. This enhanced diffusion speeds up the chemical reaction for the formation of Si-O-Si, and thus more bonding sites are available before the interface close-up. As a result, we observe an increase in bonding strength, bonding efficiency and the bonding speed.
Title: Making Wafer Bonding Viable for Mass Production
Description:
AbstractDirect wafer bonding was performed under medium vacuum condition.
High bonding strength (larger than 20 MPa) is achieved at the bonding temperature of only 400°C, and the annealing time for complete bonding is less than 5 hours.
The bonding efficiency (percentage of the bonded area over entire wafer area) of the medium vacuum wafer bonding (MVWB) is also found to be better than the traditional wafer bonding.
Qualitative description of the mechanism of MVWB is proposed in present work.
It is believed that the medium vacuum can enhance the out-diffusion of the water molecules and other trapped impurities through the bonding interface which is porous initially.
This enhanced diffusion speeds up the chemical reaction for the formation of Si-O-Si, and thus more bonding sites are available before the interface close-up.
As a result, we observe an increase in bonding strength, bonding efficiency and the bonding speed.
Related Results
Etching Performance Improvement On Semiconductor Silicon Wafers With Redesigned Etching Drum
Etching Performance Improvement On Semiconductor Silicon Wafers With Redesigned Etching Drum
Proses etching atau punaran melibatkan pelbagai tindak balas kimia dan sangat penting dalam menentukan kualiti wafer silikon. Projek ini menyelesaikan masalah utama wafer ketika pr...
Collective D2W Hybrid Bonding for 3D SIC and Heterogeneous Integration
Collective D2W Hybrid Bonding for 3D SIC and Heterogeneous Integration
Heterogeneous integration describes the coalescence of multiple developments of the past years. On the one hand, 3D integration technologies have been emerged and are widely availa...
The Black Mass as Play: Dennis Wheatley's The Devil Rides Out
The Black Mass as Play: Dennis Wheatley's The Devil Rides Out
Literature—at least serious literature—is something that we work at. This is especially true within the academy. Literature departments are places where workers labour over texts c...
Electroplated Al Press Marking for Wafer-Level Bonding
Electroplated Al Press Marking for Wafer-Level Bonding
Heterogeneous integration of micro-electro mechanical systems (MEMS) and complementary metal oxide semiconductor (CMOS) integrated circuits (ICs) by 3D stacking or wafer bonding is...
Magnetic alignment technology for wafer bonding
Magnetic alignment technology for wafer bonding
Purpose
Wafer bonding is a key process for 3 D advanced packaging of integrated circuits. It requires very high accuracy for the wafer alignment. To solve the problems of large mov...
Surface Activated Bonding -from the Standard SAB to Modified SAB
Surface Activated Bonding -from the Standard SAB to Modified SAB
The surface activated bonding (SAB) was proposedin thelate 1980’s for bonding of metal to metal and to ceramics at room temperature. The standard SAB method is based on surface act...
Research on the Glass Silicon Anodic Direct Bonding Parameters
Research on the Glass Silicon Anodic Direct Bonding Parameters
<p>By MEMS packaging test platform for bonding process of bonding temperature and bonding time,and test silicon specifications experimental study.Firstly,according to the ano...
Advances in Parylene Adhesive Bonding for the Realization of Biocompatible Microsystems
Advances in Parylene Adhesive Bonding for the Realization of Biocompatible Microsystems
Wafer to wafer and chip to wafer bonding technologies are a key enabling processes for the fabrication of microsystems. The presented paper focuses on the latest research results o...