Characterizing microseismicity at the Rotokawa and Ngatamariki geothermal fields

<p>In this thesis, we construct a four-year (2012–2015) catalog of microearthquakes for the Ngatamariki and Rotokawa geothermal fields in the Taupō Volcanic Zone of New Zealand, and use these data to improve the knowledge of reservoir behavior. These microearthquakes occur frequently, often every few seconds, and therefore provide a tool that we use to assess reservoir properties with dense spatial and temporal resolution as well as to illuminate the underlying processes of seismogenesis. Using a matched-filter detection technique we detect and precisely relocate nearly 9000 events, from which we calculate 982 focal mechanisms.  At Ngatamariki, these results constitute the first detailed analysis of seismicity at a newly-developed resource. It has been commonly assumed that induced shear on fractures increases reservoir permeability by offsetting asperities on either fracture wall, thereby propping the fracture open. During stimulation treatments of two boreholes (NM08 and NM09), borehole permeability experiences logarithmic growth. At NM08, this growth occurs for eight days in the absence of seismicity, while at NM09 only nine microearthquakes are observed during the one-month treatment. This suggests that hydro-shear, the process of inducing seismicity through increased pore pressure at critically-stressed fractures, is not the dominant mechanism of permeability increase at many geothermal wells. Instead, aseismic processes, likely thermal and overpressure induced fracture opening, dominate well stimulation in high-temperature geothermal settings.  At Rotokawa, the earthquake frequency-magnitude distribution (b-value) is positively correlated with both proximity to major injection wells and depth. In an inferred pressure compartment near injection well RK23, b is ~1.18, but is <1.0 elsewhere, suggesting a connection between increased pore-fluid pressure and small-magnitude events. In addition, throughout the reservoir b increases from a value of ~1.0 at injection depth to almost 1.5 two kilometers below the reservoir, consistent with observations at volcanic areas elsewhere, but opposing the conventional wisdom that b-value is inversely proportional to differential stress.  Finally, the 982 focal mechanism observations that we invert for stress show a normal faulting regime throughout both reservoirs. At Rotokawa, a lowering stress ratio, v, after reintroduction of injection well RK23 (v drops from 0.9 to 0.2 over six months) indicates that anisotropic reservoir cooling affects the reservoir stress state through a process of preferential stress reduction.</p>