Microseismicity Associated with Actively Exploited Geothermal Systems: Earthquake Detection and Probabilistic Location at Rotokawa and Statistical Seismic Network Design at Kawerau

<p>Geothermal power has progressively been recognised as an important energy resource due to the depletion of old power sources, and as a more environmentally aware population pushes for an increase in renewable energy sources. Monitoring microseismicity occurring in active geothermal systems is one means of both characterising the system’s fault architecture and characterising fluid/rock interaction in response to production. This study focuses on better understanding seismicity in two active geothermal fields, through the development and implementation of two different algorithms: an automated microearthquake detection algorithm using a matched filter technique (improving earthquake detection), and an optimal seismic network design algorithm (improving earthquake location). Both algorithms have been implemented in codes that are easily adaptable to other data sets. The first of these algorithms has been applied to five months of continuous seismic waveform data spanning a fluid injection operation in the Rotokawa geothermal field. The cross-correlation of 14 high-quality master events with the continuous seismic data yields 2461 newly detected earthquakes spanning the magnitude range M=-0.4 to M=2.6 with a mean magnitude of M=0.47. The earthquakes detected with each master event exhibit high waveform similarity over approximately three orders of magnitude, and appear to follow a Gutenberg-Richter power law with a catalogue completeness down to M~ 0. Hypocentres for these detected events computed using the probabilistic earthquake location algorithm NonLinLoc reveal the dominant locus of seismicity to lie between 1.0–2.5 km depth, a location consistent with that of the Rotokawa Andesite which forms the Rotokawa reservoir. Focal mechanism solutions for the master events are predominantly normal, with half displaying a large strike-slip component, and the stress parameters obtained for this suite of focal mechanisms imply a northeast–southwest oriented maximum horizontal stress: both of these results are consistent with the extensional regime of the TVZ. Seismicity occurring within a 300 m horizontal radius of the injection well’s feed-zones, and extending to 5 km depth, initially exhibits a correlation with injection flow rates with a ~ 2 day lag, and seismicity rates decrease ~ 10 weeks after injection. We surmise that seismicity within the injection region and close to the injection well is likely to be injection-induced, with one portion of the injectate returning to the production region, while the other either migrates southeastward out of the field or remains within the injection region; the origin of seismicity within the production region in relationship to production and injection processes is unclear. The second of these algorithms involves the derivation of a design criterion, which we apply to inform the expansion of the existing seismic monitoring programme at Kawerau geothermal field; we also apply an early version to the short-term/rapid-response network design following the M7.1 September 2010 Darfield earthquake. Unlike previous seismic network design algorithms, the new algorithm incorporates methods for the realistic representation of 3D velocity structures and attenuation models for both P and S travel times, a surface noise model, and the ability to apply complex weighting functions to the earthquake set. The results demonstrate the utility of this algorithm in even simplistic cases, and show how each new parameter incorporated into the design model affects the optimal network design obtained, identifying the need for accurate input data to provide optimal results.</p>