Optical response and temperature shielding coatings using tri-layer structure composed of titania/silica/titania

The fabrication of metamaterials with inspiration from nature paved the door for the creation of revolutionary passive and active devices. Butterfly wings are one of them, and their multilayered structure motivated nanotechnologists, physicists, and other optoelectronic and photonic engineers to develop photonic crystals, dielectric reflectors, and Bragg reflectors for use in visible light communication, solar cells, and other photonic and optoelectronic applications. We report the sol–gel spin coating of a dielectric reflector on the glass substrate, an optical passive component consisting of titania and silica thin films for infrared radiation reflection. Individual thin films of titania and silica on glass substrates were studied using an x-ray diffractometer, which indicated anatase of titania and the amorphous nature of silica at a Bragg angle of 25° with a sharp and wide peak, respectively. The multilayer structure of titania/silica/titania was further investigated using Fourier transform infrared spectroscopy, which revealed the presence of Ti–O–Ti and Si–O–Si vibrational bonds at wavenumbers 546 and 973 cm−1, respectively, as well as the presence of Ti–O–Si vibrational bond at 1100 cm−1. The thickness of the multilayer titania/silica/titania was measured using a cross-sectional field emission scanning electron microscope (FESEM) and found to be 160/240/160 nm, respectively. Finally, reflection investigation on the multilayer structure using ultraviolet–visible–near-infrared spectroscopy validated the reflection of the infrared spectrum area by around 70% and showed to be beneficial for temperature shielding applications on glass furnishings.