Javascript must be enabled to continue!
Different Kinetic Degradation Of Methyl Orange By Nanostructured Titania: Titania Nanotube, Titania Nanofiber, And Titania Nanoparticle
View through CrossRef
TiO2 is a semiconductor with photo-catalytic properties and is being thoroughly investigated for its use in the degradation of harmful environmental pollutants using photo-catalytic reactions. The effects of TiO2 nanoparticles and different structured TiO2 electrodes on methyl orange degradation using sunlight have been investigated. Titania Nanotube (TNT) and Titania Nanofiber (TNF) were obtained through anodic oxidation of pure titanium sheet and titania nanoparticle was commercially available. Nanostructured Titania was doped with palladium and Methyl Orange, a harmful environmental pollutant, was degraded using palladium doped nanostructured titania. The kinetic degradation was observed using UV-Vis spectroscopy. Titania Nanotube degraded the pollutant faster than titania nanofiber because of the larger surface area provided by tubes. Titania nanoparticle being in the powder form was the most effective in degrading methyl orange pollutant because of the very large surface area providing higher catalytic capability.
Hamad bin Khalifa University Press (HBKU Press)
Title: Different Kinetic Degradation Of Methyl Orange By Nanostructured Titania: Titania Nanotube, Titania Nanofiber, And Titania Nanoparticle
Description:
TiO2 is a semiconductor with photo-catalytic properties and is being thoroughly investigated for its use in the degradation of harmful environmental pollutants using photo-catalytic reactions.
The effects of TiO2 nanoparticles and different structured TiO2 electrodes on methyl orange degradation using sunlight have been investigated.
Titania Nanotube (TNT) and Titania Nanofiber (TNF) were obtained through anodic oxidation of pure titanium sheet and titania nanoparticle was commercially available.
Nanostructured Titania was doped with palladium and Methyl Orange, a harmful environmental pollutant, was degraded using palladium doped nanostructured titania.
The kinetic degradation was observed using UV-Vis spectroscopy.
Titania Nanotube degraded the pollutant faster than titania nanofiber because of the larger surface area provided by tubes.
Titania nanoparticle being in the powder form was the most effective in degrading methyl orange pollutant because of the very large surface area providing higher catalytic capability.
Related Results
Synthesis, characterization, and interfacial adhesion of titania iodine‐doped nanotubes architectures on additively manufactured Ti‐6Al‐4V implant
Synthesis, characterization, and interfacial adhesion of titania iodine‐doped nanotubes architectures on additively manufactured Ti‐6Al‐4V implant
AbstractThis study aimed to synthesize, characterize, and evaluate the adhesion strength of titania nanotubes (titania nanotubes) and iodine‐doped titania nanotubes (I‐titania nano...
Influence of microbial bioinoculants on the accumulation of new phytocompounds in Oroxylum indicum (L.) Benth. ex Kurz
Influence of microbial bioinoculants on the accumulation of new phytocompounds in Oroxylum indicum (L.) Benth. ex Kurz
The seedlings of Oroxylum indicum were inoculated with plant growth promoting microbes (PGPMs) mainly, Glomus mosseae, Trichoderma harzianum and Pseudomonas putida both alone and c...
FABRICATION OF PCL-COLLAGEN NANOFIBER USING CHLOROFORM-FORMIC ACID SOLUTION AND ITS APPLICATION AS WOUND DRESSING CANDIDATE
FABRICATION OF PCL-COLLAGEN NANOFIBER USING CHLOROFORM-FORMIC ACID SOLUTION AND ITS APPLICATION AS WOUND DRESSING CANDIDATE
In this study, polycaprolactone-collagen nanofiber was prepared with 10% w/v composition using a mixture of chloroform-formic acid. PCL was dissolved in chloroform while collagen w...
REVIEW : FABRIKASI MEMBRAN BERBASIS NANOFIBER DENGAN METODE ELECTROSPINNING
REVIEW : FABRIKASI MEMBRAN BERBASIS NANOFIBER DENGAN METODE ELECTROSPINNING
AbstrakElectrospinning adalah metode yang efektif dalam fabrikasi membran berbasis nanofiber. Membran nanofiber yang dihasilkan dengan menggunakan metode electrospinning lebih ungg...
Physicochemical Properties of TiO<sub>2</sub> Nanoparticle Loaded APTES-Functionalized MWCNTs Composites and Their Photocatalytic Activity with Kinetic Study
Physicochemical Properties of TiO<sub>2</sub> Nanoparticle Loaded APTES-Functionalized MWCNTs Composites and Their Photocatalytic Activity with Kinetic Study
In this study, functionalized-MWCNTs with 3-aminopropyltriethoxysilane (APTES) loaded titania nanoparticles (MWCNTs-APTES-TiO2) were prepared to investigate their physicochemical p...
Novel Methodology for Delivering Putrescine into the Apple Explants Using Hormone Anchored Nanotube
Novel Methodology for Delivering Putrescine into the Apple Explants Using Hormone Anchored Nanotube
Abstract
Multi wall carbon nanotubes have been successfully exploited as growth regulator for manipulation of plant development. Also, nanoparticles are gradually involved ...
Gold nanoparticle/silk fibroin-based nanofiber enhances skin regeneration
Gold nanoparticle/silk fibroin-based nanofiber enhances skin regeneration
Abstract
Objectives
The aim of this study was to determine the wound-healing potential of gold nanoparticles and silk fibroin-ba...
PENGARUH VARIASI PENAMBAHAN MASSA PANI TERHADAP KONDUKTIVITAS NANOFIBER PVA/PANI
PENGARUH VARIASI PENAMBAHAN MASSA PANI TERHADAP KONDUKTIVITAS NANOFIBER PVA/PANI
Abstrak
Polianilin adalah salah satu polimer konduktif yang memiliki konduktivitas relatif tinggi dan banyak dikembangkan karena tahapan sintesisnya yang mudah. PANI dapat dibentu...

