Javascript must be enabled to continue!
Research on Continuous Cooling Dynamic Transformation of T700
View through CrossRef
Continuous cooling dynamic transformation regularity of T700 was investigated by gleeble-3500. The results show when the cooling rate is small organization is mainly composed of polygonal ferrite and pearlite and has minor banded organization. With the increase of cooling rate, begin to appear granular bainite. When cooling rate reaches 3/s or more, ferrite changes to quasi polygon, and start to appear small amount of bainite. when the cooling rate is 7°C/s, pearlite is disappeared in structure, granular bainite increases, quasipolygonal ferrite content is gradually decreased. When the cooling rate is increased to 10°C/s or above, organization is granular bainite.
Trans Tech Publications, Ltd.
Title: Research on Continuous Cooling Dynamic Transformation of T700
Description:
Continuous cooling dynamic transformation regularity of T700 was investigated by gleeble-3500.
The results show when the cooling rate is small organization is mainly composed of polygonal ferrite and pearlite and has minor banded organization.
With the increase of cooling rate, begin to appear granular bainite.
When cooling rate reaches 3/s or more, ferrite changes to quasi polygon, and start to appear small amount of bainite.
when the cooling rate is 7°C/s, pearlite is disappeared in structure, granular bainite increases, quasipolygonal ferrite content is gradually decreased.
When the cooling rate is increased to 10°C/s or above, organization is granular bainite.
Related Results
Experimental Feasibility Study of Radial Injection Cooling of Three-Pad Air Foil Bearings
Experimental Feasibility Study of Radial Injection Cooling of Three-Pad Air Foil Bearings
The foil bearing (FB) is one type of hydrodynamic bearing using air or another gas as a lubricant. When FBs are designed, installed, and operated properly, they are a very cost-eff...
Study on Continuous Cooling Static Transformation Regularity of T700
Study on Continuous Cooling Static Transformation Regularity of T700
Continuous cooling static transformation regularity of T700 was investigated by gleeble-3500, the results show when the cooling rate is small organization is mainly composed of fer...
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Abstract
Film cooling technology is widely used in gas turbines. Improvement of gas turbine thermal efficiency, specific power and specific thrust can be achieved by...
Estimating installed cooling capacities on city scale
Estimating installed cooling capacities on city scale
Heating and cooling of buildings is one of the largest final energy uses and largest sources of greenhouse gas emissions. To reduce the impact of heating and cooling on our climate...
Anomalous Magnetorheological Response for Carrageenan Magnetic Hydrogels Prepared by Natural Cooling
Anomalous Magnetorheological Response for Carrageenan Magnetic Hydrogels Prepared by Natural Cooling
The effect of cooling rate on the magnetorheological response was investigated for magnetic hydrogels consisting of carrageenan and carbonyl iron particles with a concentration of ...
Anomalous Magnetorheological Response for Carrageenan Magnetic Hydrogels Prepared by Natural Cooling
Anomalous Magnetorheological Response for Carrageenan Magnetic Hydrogels Prepared by Natural Cooling
The effect of the cooling rate on magnetorheological response was investigated for magnetic hydrogels consisting of carrageenan and carbonyl iron particles with a concentration of ...
Impingement/Effusion Cooling With Low Coolant Mass Flow
Impingement/Effusion Cooling With Low Coolant Mass Flow
A low coolant mass flow impingement/effusion design for a low NOx combustor wall cooling application was predicted, using conjugate heat transfer (CHT) computational fluid dynamics...
Large Eddy Simulations on Fan Shaped Film Cooling Hole With Various Inlet Turbulence Generation Methods
Large Eddy Simulations on Fan Shaped Film Cooling Hole With Various Inlet Turbulence Generation Methods
Abstract
Large eddy simulations on well-known 7-7-7 fan shaped cooling hole have been carried out. Film cooling methods are generally applied to high pressure turbin...

