Javascript must be enabled to continue!
The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics
View through CrossRef
Continuous carbon fiber (CF)-reinforced poly (ether ether ketone) (PEEK) composites have excellent mechanical properties, but their processing techniques are limited. Therefore, we promoted a braiding method based on the hybrid fiber method by hot-compacting CF/PEEK plain weave fabrics to solve the problem of difficult wetting between CF and PEEK. Four parameters—melting temperature, molding pressure, crystallization temperature and the resin contents—were investigated for optimized fabrication. After studying the melting range, thermal stability and the contact angle of PEEK under different temperatures, the melting temperature was set at 370 °C. An ultra-depth-of-field 3D microscope was adopted to investigate the effects of molding pressure in the melting stage. The tensile strength or modulus along and perpendicular to the carbon fiber direction and crystallinity under different crystallization temperatures were analyzed. As a result, the sample crystalized at 300 °C showed an excellent tensile properties and crystallinity. The increased mass ratio of PEEK ranging from 50.45% to 59.07% allowed for much stronger interfacial strength; however, the higher resin content can lead to the dispersion of CFs, loss of resin and the formation of defects during processing. Finally, the optimal resin mass content was 59.07%, with a tensile strength of 738.36 ± 14.49 MPa and a flexural strength of 659.68 ± 57.53 MPa. This paper studied the optimized processing parameters to obtain better properties from CF/PEEK plain weave fabrics and to further broaden the specific applications of CF/PEEK composites, demonstrating a new direction for its fabrication.
Title: The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics
Description:
Continuous carbon fiber (CF)-reinforced poly (ether ether ketone) (PEEK) composites have excellent mechanical properties, but their processing techniques are limited.
Therefore, we promoted a braiding method based on the hybrid fiber method by hot-compacting CF/PEEK plain weave fabrics to solve the problem of difficult wetting between CF and PEEK.
Four parameters—melting temperature, molding pressure, crystallization temperature and the resin contents—were investigated for optimized fabrication.
After studying the melting range, thermal stability and the contact angle of PEEK under different temperatures, the melting temperature was set at 370 °C.
An ultra-depth-of-field 3D microscope was adopted to investigate the effects of molding pressure in the melting stage.
The tensile strength or modulus along and perpendicular to the carbon fiber direction and crystallinity under different crystallization temperatures were analyzed.
As a result, the sample crystalized at 300 °C showed an excellent tensile properties and crystallinity.
The increased mass ratio of PEEK ranging from 50.
45% to 59.
07% allowed for much stronger interfacial strength; however, the higher resin content can lead to the dispersion of CFs, loss of resin and the formation of defects during processing.
Finally, the optimal resin mass content was 59.
07%, with a tensile strength of 738.
36 ± 14.
49 MPa and a flexural strength of 659.
68 ± 57.
53 MPa.
This paper studied the optimized processing parameters to obtain better properties from CF/PEEK plain weave fabrics and to further broaden the specific applications of CF/PEEK composites, demonstrating a new direction for its fabrication.
Related Results
Comparison and analysis of measurements for crystallinity of PEEK and CF/PEEK composites
Comparison and analysis of measurements for crystallinity of PEEK and CF/PEEK composites
AbstractPEEK and CF/PEEK are two significant materials whose properties are intricately linked to their crystallization behavior. This study employed three analytical techniques—de...
Biomechanical Analysis of Pullout Strengths of Rotator Cuff and Glenoid Anchors: 2011 Update
Biomechanical Analysis of Pullout Strengths of Rotator Cuff and Glenoid Anchors: 2011 Update
Purpose
To evaluate the biomechanical and design characteristics of newer suture anchors.
Methods
...
Preparation and Tribological Behaviours of Lubrication Enhanced PEEK Composites
Preparation and Tribological Behaviours of Lubrication Enhanced PEEK Composites
Poly-ether-ether ketone (PEEK) is a great potential thermoplastic in industry and medical treatment and health. In this work, the PEEK/GO and PEEK/MoS2 composites were prepared by ...
Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)
Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)
The reliable assembly of poly-ether-ether-ketone (PEEK) and carbon fiber-reinforced PEEK (CFR-PEEK) is crucial to effective load transfer within lightweight and high-stiffness stru...
Interlacing weave factor of two-dimensional jacquard woven fabrics
Interlacing weave factor of two-dimensional jacquard woven fabrics
This study explores and discusses the structure of two-dimensional (2D) jacquard woven fabric and its weave pattern. The aim of the study is to propose a methodology focused on the...
Análisis de fatiga y flexión sobre implantes monoblock de PEEK y la unión pilar PEEK-implante de titanio
Análisis de fatiga y flexión sobre implantes monoblock de PEEK y la unión pilar PEEK-implante de titanio
En este trabajo de tesis doctoral se analizaron las fuerzas de flexión y fatiga sobre implantes dentales monoblock de PEEK y también la unión pilar PEEK - implante de titanio es un...
In vitro physicochemical and biological properties of titanium alloy, zirconia, polyetheretherketone, and carbon fiber-reinforced polyetheretherketone
In vitro physicochemical and biological properties of titanium alloy, zirconia, polyetheretherketone, and carbon fiber-reinforced polyetheretherketone
Implant repair is a common means to restore the normal function of the hard tissues (bone or teeth). At present, the commonly and potentially used implant materials include titaniu...
On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites
On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites
AbstractPolyimide (PI) and polyetheretherketone (PEEK) are superior high‐performance thermoplastics being extensively used in the fields of fiber‐reinforced polymer composites. How...

