Javascript must be enabled to continue!
Literature Review: Self Curing Concrete
View through CrossRef
Abstract: Curing is one of the most important factors for achieving maximum desirable strength in concrete, concrete should be cured properly so that it is fully hydrated and loss of moisture inside the concrete should be reduced. The most regularly and abundantly used construction material is concrete because of its superior compressive strength and stability. The curing involves in retaining adequate moisture content from the time of placing the concrete until final stage, at that point of time the concrete develops the satisfied properties by promoting optimum cement hydration immediately after placement. Water soluble alcohols for instance Poly Vinyl Alcohol (PVA), Poly Ethylene Glycol (PEG), and Super Absorbent Polymer (SAP) are feasible as selfcuring agents in concrete. The Self Curing is an “internal curing system” in which a Hydrophilic material such as Polyethylene Glycol, Paraffin wax or Acrylic acid, the polymer that is soluble in water is allowed to mix in the prepared concrete. The calcium lignosulfonate (CLS) having water solubility 98% to 98.5% has been used as self-curing agent in different percentage (0.2%, 0.3%, 0.4%, and 0.5%). The use of polyethylene glycol in conventional concrete as an admixture helps better hydration and hence the strength of concrete. Polyethylene glycol 400 in the order of 0, 0.5%, 1% &1.5 % by weight of cement for M 30 grade of concrete and river sand is replaced by M sand in the ratio of 30%, 40% & 50%. As well as Poly vinyl alcohol has been added to concrete by weight of cement at the dosage of 0%, 1%, 1.1%, 1.2%, 1.3% 1.4%, 1.5%, 1.6% and then the mechanical properties of concrete were tested such as compressive and split tensile strength. The ratio of water to binding material (w/b) of reference concrete mixture (PC) was fixed to 0.38. S01, S02 and S03 mean the volumes of SAP are 0.1%, 0.2% and 0.3% of cementitious materials, respectively. We consider that poly ethylene glycol in concrete which helps in self-curing and helps in better hydration and hence strength.
International Journal for Research in Applied Science and Engineering Technology (IJRASET)
Title: Literature Review: Self Curing Concrete
Description:
Abstract: Curing is one of the most important factors for achieving maximum desirable strength in concrete, concrete should be cured properly so that it is fully hydrated and loss of moisture inside the concrete should be reduced.
The most regularly and abundantly used construction material is concrete because of its superior compressive strength and stability.
The curing involves in retaining adequate moisture content from the time of placing the concrete until final stage, at that point of time the concrete develops the satisfied properties by promoting optimum cement hydration immediately after placement.
Water soluble alcohols for instance Poly Vinyl Alcohol (PVA), Poly Ethylene Glycol (PEG), and Super Absorbent Polymer (SAP) are feasible as selfcuring agents in concrete.
The Self Curing is an “internal curing system” in which a Hydrophilic material such as Polyethylene Glycol, Paraffin wax or Acrylic acid, the polymer that is soluble in water is allowed to mix in the prepared concrete.
The calcium lignosulfonate (CLS) having water solubility 98% to 98.
5% has been used as self-curing agent in different percentage (0.
2%, 0.
3%, 0.
4%, and 0.
5%).
The use of polyethylene glycol in conventional concrete as an admixture helps better hydration and hence the strength of concrete.
Polyethylene glycol 400 in the order of 0, 0.
5%, 1% &1.
5 % by weight of cement for M 30 grade of concrete and river sand is replaced by M sand in the ratio of 30%, 40% & 50%.
As well as Poly vinyl alcohol has been added to concrete by weight of cement at the dosage of 0%, 1%, 1.
1%, 1.
2%, 1.
3% 1.
4%, 1.
5%, 1.
6% and then the mechanical properties of concrete were tested such as compressive and split tensile strength.
The ratio of water to binding material (w/b) of reference concrete mixture (PC) was fixed to 0.
38.
S01, S02 and S03 mean the volumes of SAP are 0.
1%, 0.
2% and 0.
3% of cementitious materials, respectively.
We consider that poly ethylene glycol in concrete which helps in self-curing and helps in better hydration and hence strength.
Related Results
Microstructure and durability characteristics of self-curing concrete
Microstructure and durability characteristics of self-curing concrete
Efficient curing of concrete requires high water demand which is not available in many practical situations. Therefore, the need of self-curing concrete becomes more demanding. In ...
Evaluating the Science to Inform the Physical Activity Guidelines for Americans Midcourse Report
Evaluating the Science to Inform the Physical Activity Guidelines for Americans Midcourse Report
Abstract
The Physical Activity Guidelines for Americans (Guidelines) advises older adults to be as active as possible. Yet, despite the well documented benefits of physical activi...
Study on the effect of seawater on making and curing of unreinforced concrete applications
Study on the effect of seawater on making and curing of unreinforced concrete applications
Concrete, an essential component of worldwide infrastructure, depends significantly on fresh water for its manufacturing, contributing to freshwater scarcity in many regions. As co...
PENGARUH PERAWATAN BETON (CURING) TERHADAP KUAT TEKAN BETON NORMAL
PENGARUH PERAWATAN BETON (CURING) TERHADAP KUAT TEKAN BETON NORMAL
Abstract— Concrete is a mixture consisting of sand, small stones, cement, and water that forms a solid mass. To produce good-quality concrete, concrete work control is needed, and ...
An Experimental Investigation of the Properties of Self Curing Concrete Using Foundry Sand
An Experimental Investigation of the Properties of Self Curing Concrete Using Foundry Sand
The aim of this investigation is to study the use of the water soluble polyethylene glycol as self-curing agent. The function of self-curing agents is to reduce the water evaporati...
Experimental Study on Influencing Factors of Mixing Solidification Strength of Marine Soft Soil
Experimental Study on Influencing Factors of Mixing Solidification Strength of Marine Soft Soil
It is a common problem that the soft soil solidified strength by mixing is low. In order to search for the sensitive factors that affect the solidified strength, a certain marine s...
Design and analysis of dual-curing systems
Design and analysis of dual-curing systems
Dual-curing processing is a method to prepare thermoset materials through two polymerization reactions carried out
simultaneously or sequentially. In these processes, a firm under...
REKAYASA OVEN PORTABEL-HORISONTAL PADA PENGOLAHAN TEMBAKAU VIRGINIA
REKAYASA OVEN PORTABEL-HORISONTAL PADA PENGOLAHAN TEMBAKAU VIRGINIA
<p>Oven portabel-horisontal (4m x 8m x 4m) untuk pengovenan daun tembakau Virginia menjadi krosok fc (flue-cured) telah direkayasa di Balai Penelitian Tanaman Tembakau dan Se...

