Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Sustainable Transportation Fuels From Off-Peak Wind Energy, CO2, and Water

View through CrossRef
Doty Energy is developing advanced processes to permit the production of fully carbon-neutral gasoline, jet fuel, diesel, ethanol, and plastics from exhaust CO2 and off-peak clean energy (wind and nuclear) at prices that can compete with fossil-derived products. Converting CO2 into fuels will eliminate the need for CO2 sequestration, reduce global CO2 emissions by 40%, and provide a nearly insatiable market for off-peak wind. It has long been known that it is theoretically possible to convert CO2 and water into standard liquid hydrocarbon fuels at high efficiency. However, the early proposals for doing this conversion had efficiencies of only 25% to 35%. That is, the chemical energy in the liquid fuels produced (gasoline, ethanol, etc.) would be about the 30% of the input energy required. The combination of the eight major technical advances made over the past two years should permit this conversion to be done at up to 60% efficiency. Off-peak grid energy averaged only $16.4/MWhr in the Minnesota hub throughout all of 2009 (the cheapest 6 hours/day averaged only $7.1/MWh). At such prices, the synthesized standard liquid fuels (dubbed “WindFuels”) should compete even when petroleum is only $45/bbl. A more scalable alternative for transportation fuels is needed than biofuels. It is in our economic and security interests to produce transportation fuels domestically at the scale of hundreds of billions of gallons per year. WindFuels can scale to this level, and as they are fully carbon-neutral they will dramatically reduce global CO2 emissions at the same time. Switching 70% of global transportation fuels from petroleum to WindFuels should be possible over the next 30 years. WindFuels will insure extremely strong growth in wind energy for many decades by generating an enormous market for off-peak wind energy. WindFuels is based largely on the commercially proven technologies of wind energy, water electrolysis, and Fischer Tropsch (FT) chemistry. Off-peak low carbon energy is used to split water into hydrogen and oxygen. Some of the hydrogen is used to reduce CO2 into carbon monoxide (CO) and water via the Reverse Water Gas Shift (RWGS) reaction. The CO and the balance of the hydrogen are fed into an FT reactor similar to those used to produce fuels and chemicals from coal or natural gas. The processes have been simulated, and key experiments are being carried out to help optimize process conditions and validate the simulations.
Title: Sustainable Transportation Fuels From Off-Peak Wind Energy, CO2, and Water
Description:
Doty Energy is developing advanced processes to permit the production of fully carbon-neutral gasoline, jet fuel, diesel, ethanol, and plastics from exhaust CO2 and off-peak clean energy (wind and nuclear) at prices that can compete with fossil-derived products.
Converting CO2 into fuels will eliminate the need for CO2 sequestration, reduce global CO2 emissions by 40%, and provide a nearly insatiable market for off-peak wind.
It has long been known that it is theoretically possible to convert CO2 and water into standard liquid hydrocarbon fuels at high efficiency.
However, the early proposals for doing this conversion had efficiencies of only 25% to 35%.
That is, the chemical energy in the liquid fuels produced (gasoline, ethanol, etc.
) would be about the 30% of the input energy required.
The combination of the eight major technical advances made over the past two years should permit this conversion to be done at up to 60% efficiency.
Off-peak grid energy averaged only $16.
4/MWhr in the Minnesota hub throughout all of 2009 (the cheapest 6 hours/day averaged only $7.
1/MWh).
At such prices, the synthesized standard liquid fuels (dubbed “WindFuels”) should compete even when petroleum is only $45/bbl.
A more scalable alternative for transportation fuels is needed than biofuels.
It is in our economic and security interests to produce transportation fuels domestically at the scale of hundreds of billions of gallons per year.
WindFuels can scale to this level, and as they are fully carbon-neutral they will dramatically reduce global CO2 emissions at the same time.
Switching 70% of global transportation fuels from petroleum to WindFuels should be possible over the next 30 years.
WindFuels will insure extremely strong growth in wind energy for many decades by generating an enormous market for off-peak wind energy.
WindFuels is based largely on the commercially proven technologies of wind energy, water electrolysis, and Fischer Tropsch (FT) chemistry.
Off-peak low carbon energy is used to split water into hydrogen and oxygen.
Some of the hydrogen is used to reduce CO2 into carbon monoxide (CO) and water via the Reverse Water Gas Shift (RWGS) reaction.
The CO and the balance of the hydrogen are fed into an FT reactor similar to those used to produce fuels and chemicals from coal or natural gas.
The processes have been simulated, and key experiments are being carried out to help optimize process conditions and validate the simulations.

Related Results

Rapid Large-scale Trapping of CO2 via Dissolution in US Natural CO2 Reservoirs
Rapid Large-scale Trapping of CO2 via Dissolution in US Natural CO2 Reservoirs
Naturally occurring CO2 reservoirs across the USA are critical natural analogues of long-term CO2 storage in the subsurface over geological timescales and provide valuable insights...
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Background: In a wind farm, the wind speed of the downstream wind turbine will be lower than the wind speed of the upstream wind turbine due to the influence of the wake. Therefore...
Savonius Rotor for Offshore Wind Energy Conversion
Savonius Rotor for Offshore Wind Energy Conversion
Abstract Analysis of performance is presented for wind energy conversion by a Savonius type vertical axis rotor configured for generation of electrical power. The...
Impact of CCUS Impurities on Dense Phase CO2 Pipeline Surface Engineering Design
Impact of CCUS Impurities on Dense Phase CO2 Pipeline Surface Engineering Design
Abstract Numerous CO2 injection pipeline applications have been developed and implemented in the past decades in the UAE and all around the globe. Transporting the C...
Potential of Offshore Wind Energy in Australia
Potential of Offshore Wind Energy in Australia
Abstract Offshore wind energy has attracted great attention from numerous committees including governments, academics and engineers and energy companies due to gr...
The Comprehensive Evaluation on the Integral Development of Volcanic Gas Reserves and CO2 Flooding in Jilin Oil Field
The Comprehensive Evaluation on the Integral Development of Volcanic Gas Reserves and CO2 Flooding in Jilin Oil Field
Abstract Pilot-CO2 flooding in Jilin Oil Field has been got a first base in recent years in order to ensure CO2 coming from the development of volcanic gas reserv...
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine
Background: The wind turbine is divided into a horizontal axis and a vertical axis depending on the relative positions of the rotating shaft and the ground. The advantage of the ch...
Introducing Optimal Energy Hub Approach in Smart Green Ports based on Machine Learning Methodology
Introducing Optimal Energy Hub Approach in Smart Green Ports based on Machine Learning Methodology
Abstract The integration of renewable energy systems in port facilities is essential for achieving sustainable and environmentally friendly operations. This paper presents ...

Back to Top