Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Reproducible SPT Hammer Impact Force with an Automatic Free Fall SPT Hammer System
View through CrossRef
Abstract
Stress wave energy measurements were made to compare the performance of an automatic standard penetration test (SPT) hammer system with the free fall performance of a safety type hammer. It was found that the automatic free fall hammer and the safety hammer tested in free fall provide practically the same mean peak force at impact and the same mean driving energy. The coefficient of variation of measured stress wave energy during any test series of the automatic hammer system is relatively small and usually in the range of 1 to 2%.
Title: Reproducible SPT Hammer Impact Force with an Automatic Free Fall SPT Hammer System
Description:
Abstract
Stress wave energy measurements were made to compare the performance of an automatic standard penetration test (SPT) hammer system with the free fall performance of a safety type hammer.
It was found that the automatic free fall hammer and the safety hammer tested in free fall provide practically the same mean peak force at impact and the same mean driving energy.
The coefficient of variation of measured stress wave energy during any test series of the automatic hammer system is relatively small and usually in the range of 1 to 2%.
Related Results
Clinical Outcomes of Aberration-Free All Surface Laser Ablation (ASLA) vs. Aberration-Free ASLA Assisted by Smart Pulse Technology in High Myopia: A One-Year Follow-Up Study
Clinical Outcomes of Aberration-Free All Surface Laser Ablation (ASLA) vs. Aberration-Free ASLA Assisted by Smart Pulse Technology in High Myopia: A One-Year Follow-Up Study
Purpose. To compare the clinical outcomes of aberration-free all surface laser ablation (ASLA) with and without the use of smart pulse technology (SPT) in high myopia. Methods. Thi...
Underwater Pile Driving Test Offshore Louisiana
Underwater Pile Driving Test Offshore Louisiana
ABSTRACT
This report presents results of an underwater pile driving test conducted at South Marsh Island Block 130, offshore Louisiana. A 24inch diameter tubular ...
Research on the performance of hydraulic vibratory hammer with coupled dynamic model
Research on the performance of hydraulic vibratory hammer with coupled dynamic model
AbstractHydraulic vibratory hammer is a key equipment during piling process, and mechanical, hydraulic part of the hammer and workload are coupled with each other during operation....
Higher Wheal Sizes of Dermatophagoides farinae Sensitization Exhibit Worse Nasal Symptoms in Allergic Rhinitis Patients
Higher Wheal Sizes of Dermatophagoides farinae Sensitization Exhibit Worse Nasal Symptoms in Allergic Rhinitis Patients
Allergic rhinitis (AR) is a global health burden and it manifests in both nasal and non-nasal symptoms. Skin prick test (SPT) is a routine procedure to diagnose AR sensitized to co...
PENGARUH PENERAPAN E-SPT TERHADAP KEPATUHAN WAJIB PAJAK BADAN DALAM MELAPORKAN SPT
PENGARUH PENERAPAN E-SPT TERHADAP KEPATUHAN WAJIB PAJAK BADAN DALAM MELAPORKAN SPT
Dalam rangka meningkatkan kualitas pelayanan pajak terhadap wajib pajak, Direktorat JenderalPajak menerapkan surat pemberitahuan elektronik (e-SPT) dalam pelaporan pajak. Tujuan da...
MASALAH DAN SOLUSI PELAPORAN SPT MELALUI E-FILING UNTUK SPT 1770S DAN 1770SS DI KP2KP SELONG
MASALAH DAN SOLUSI PELAPORAN SPT MELALUI E-FILING UNTUK SPT 1770S DAN 1770SS DI KP2KP SELONG
Penelitian dengan Judul: " Masalah dan solusi pelaporan spt melalui e-filing untuk SPT 1770S dan 1770SS di KP2KP Selong”. Tujuannya untuk memecahkan masalah dan memberikan solusi...
System for Water-Driven Downhole Hammer Drilling
System for Water-Driven Downhole Hammer Drilling
Abstract
Drilling with liquid-driven downhole hammers is a new competitive method for production of boreholes. The system requires large amounts of fluid during o...
Batch Scheduling on a Single Machine with Maintenance Interval
Batch Scheduling on a Single Machine with Maintenance Interval
In the manufacturing industry, orders are typically scheduled and delivered through batches, and the probability of machine failure under high-load operation is high. On this basis...