The effect of divertor particle sources on scrape-off-layer turbulence

Abstract Tokamak edge turbulence is crucial for the cross-field transport of particles and energy away from the separatrix. A better understanding of what affects the turbulence helps to control the heat flux to the divertor targets and the wall. One potentially important factor is the ion particle source in the divertor, as the neutral pathways and the ionisation source distributions are different depending on the divertor geometry, e.g. vertical- and horizontal-target configurations. Numerically, how to represent the sources and mimic the effects on the SOL in the simulations is still an open question. In this paper, we use a 3D turbulence code STORM, based on drift-reduced Braginskii equations, to study the effects of the divertor particle source distribution on turbulence in a simplified 3D slab geometry. The results show that it requires a large amount of divertor particle source to be peaked near the separatrix to alter the heat flux deposited on the target in attached conditions. This large non-uniform particle source can locally enhance the turbulence in the divertor volume, which redistributes the energy flux to the target and reduces the maximum amplitude. Meanwhile, the plasma profiles evaluated at the outboard midplane, such as the amplitudes and fluctuations of the density and temperature, are marginally changed. Another consequence of our results is that the prediction of the temperature difference between the outboard midplane and the target would be underestimated, if the calculation only considers the conductive heat flux and ignores this enhanced cross-field transport in the divertor.