Javascript must be enabled to continue!
Investigating the influence of divertor baffles on nitrogen-seeded detachment in TCV with SOLPS-ITER simulations and TCV experiments
View through CrossRef
Abstract
Plasma edge simulations with the SOLPS-ITER code are performed to study the influence of divertor baffles on nitrogen-seeded detachment in Tokamak à Configuration Variable (TCV) single-null, L-mode discharges. Scans of nitrogen seeding rate are conducted in both baffled and unbaffled TCV divertors, where the nitrogen seeding with baffles is found to yield lower target temperatures and heat fluxes than with baffles-only and with seeding-only. The cumulative effects of baffles and seeding on target parameters are interpreted by the two-point model. The divertor neutral density and neutral compression increase with baffles, due to lower divertor to main chamber neutral conductance, as explained by a schematic neutral transport model with baffles. The nitrogen retention, defined as the ratio of average nitrogen nuclei density in divertor and main chamber, increases with the seeding rate if baffled, and remains constant if unbaffled. At the same outboard mid-plane separatrix plasma density, the nitrogen retention with baffles is lower than the unbaffled retention at low seeding levels and is higher at high seeding levels, which is explained by the changes of nitrogen ion and neutral transport with baffles and seeding. The baffled carbon retention is higher than the unbaffled retention due to lower divertor to main chamber carbon neutral conductance. Baffles increase the divertor radiation. The predicted trends of target parameters, the distribution of neutrals and radiations are well supported by TCV experiments, though discrepancies in the absolute values remain. The simulations yield an overall colder and denser divertor, consistent with previous SOLPS-ITER simulations of Ohmically heated L-modes in TCV. The successful comparison of simulation and experiment, together with the understanding gained from the neutral transport model, increases the confidence in the SOLPS simulations for the next TCV divertor upgrade.
Title: Investigating the influence of divertor baffles on nitrogen-seeded detachment in TCV with SOLPS-ITER simulations and TCV experiments
Description:
Abstract
Plasma edge simulations with the SOLPS-ITER code are performed to study the influence of divertor baffles on nitrogen-seeded detachment in Tokamak à Configuration Variable (TCV) single-null, L-mode discharges.
Scans of nitrogen seeding rate are conducted in both baffled and unbaffled TCV divertors, where the nitrogen seeding with baffles is found to yield lower target temperatures and heat fluxes than with baffles-only and with seeding-only.
The cumulative effects of baffles and seeding on target parameters are interpreted by the two-point model.
The divertor neutral density and neutral compression increase with baffles, due to lower divertor to main chamber neutral conductance, as explained by a schematic neutral transport model with baffles.
The nitrogen retention, defined as the ratio of average nitrogen nuclei density in divertor and main chamber, increases with the seeding rate if baffled, and remains constant if unbaffled.
At the same outboard mid-plane separatrix plasma density, the nitrogen retention with baffles is lower than the unbaffled retention at low seeding levels and is higher at high seeding levels, which is explained by the changes of nitrogen ion and neutral transport with baffles and seeding.
The baffled carbon retention is higher than the unbaffled retention due to lower divertor to main chamber carbon neutral conductance.
Baffles increase the divertor radiation.
The predicted trends of target parameters, the distribution of neutrals and radiations are well supported by TCV experiments, though discrepancies in the absolute values remain.
The simulations yield an overall colder and denser divertor, consistent with previous SOLPS-ITER simulations of Ohmically heated L-modes in TCV.
The successful comparison of simulation and experiment, together with the understanding gained from the neutral transport model, increases the confidence in the SOLPS simulations for the next TCV divertor upgrade.
Related Results
Initial TCV operation with a baffled divertor
Initial TCV operation with a baffled divertor
Abstract
The Tokamak à Configuration Variable (TCV) tokamak is in the midst of an upgrade to further its capability to investigate conventional and alternative diver...
Comparison of SOLPS5.0 and SOLPS‐ITER simulations for ASDEX upgrade L‐mode
Comparison of SOLPS5.0 and SOLPS‐ITER simulations for ASDEX upgrade L‐mode
AbstractThis paper examines the backward compatibility of SOLPS‐ITER with SOLPS5.0 and produces a basic test of the physics/numerics improvements/additions in SOLPS‐ITER recommende...
Implementation of a tightly baffled long-legged divertor in TCV
Implementation of a tightly baffled long-legged divertor in TCV
Abstract
The TCV tokamak contributes to the development of nuclear fusion energy with proof-of-principle experiments and by challenging models that are used to pr...
Experimental research on the TCV tokamak
Experimental research on the TCV tokamak
Abstract
Tokamak à configuration variable (TCV), recently celebrating 30 years of near-continual operation, continues in its missions to advance outstanding key phys...
Comparison of high density and nitrogen seeded detachment using SOLPS-ITER simulations of the tokamak á configuration variable
Comparison of high density and nitrogen seeded detachment using SOLPS-ITER simulations of the tokamak á configuration variable
Abstract
First of a kind SOLPS-ITER simulations on tokamak á configuration variable (TCV) that include nitrogen have been performed to model ...
Optimizing detachment control using the magnetic configuration of divertors
Optimizing detachment control using the magnetic configuration of divertors
Abstract
As tokamak research moves to reactor conditions, the control of a stable, optimally-detached divertor plasma has become increasingly relevant. Simple predic...
SOLPS-ITER numerical simulations of ITER-scale Snowflake divertors: low-field-side SF−/SF+ and high-field-side SF−/SF+ configurations
SOLPS-ITER numerical simulations of ITER-scale Snowflake divertors: low-field-side SF−/SF+ and high-field-side SF−/SF+ configurations
Abstract
Using the edge plasma code package SOLPS-ITER, we study the four types of Snowflake (SF) divertors for an ITER-size tokamak, with to...
Numerical investigation of optimal divertor gas baffle closure on TCV
Numerical investigation of optimal divertor gas baffle closure on TCV
Abstract
A first set of divertor gas baffles has recently been installed in the TCV tokamak. In order to explore the physics determining the ...

