Javascript must be enabled to continue!
Modal and stress behavioral for CFRP composite lifting lug
View through CrossRef
Purpose
In the present study, a steel lifting lug is replaced with a composite (carbon fiber-reinforced epoxy [CFRP]) lifting lug made of a carbon/epoxy composite. The purpose of this paper was to obtain a composite lifting lug with a higher level of strength that is capable of carrying loads without failure.
Design/methodology/approach
The vibration and static behaviors of steel and composite lifting lugs have been investigated using finite element analysis (FEA), ANSYS software. The main consideration in the design of the composite (CFRP) lifting lug was that the displacement of both steel and composite lugs was the same under the same load. Hence, by using the FEA displacement result of the steel lifting lug, the thickness of the composite lifting lug is determined using FEA.
Findings
Compared to the steel lifting lug, the composite (CFRP) lifting lug has much lower stresses and much higher natural frequencies. Static behavior was experienced by the composite lifting lug, showing a reduction in von Mises stress, third principal stress and XZ shear stress, respectively, by 48.4%, 34.6% and 89.8%, respectively, when compared with the steel lifting lug. A higher natural frequency of mode shape swaying in X (258.976√1,000 Hz) was experienced by the composite lifting lug when compared to the steel lifting lug (195.935√1,000 Hz). The safe strength of the design composite lifting lug has been proven by FEA results, which showed that the composite (CFRP) lifting lug has a higher factor of safety in all developed stresses than the steel lifting lug. According to von Mises stress, the factor of safety of the composite lifting lug is increased by 76% when compared to the steel lifting lug. The von Mises stress at the edge of the hole in the composite lifting lug is reduced from 23.763 MPa to 20.775 MPa when compared to the steel lifting lug.
Originality/value
This work presents the designed composite (CFRP) lifting lug, which will be able to carry loads with more safety than a steel one.
Title: Modal and stress behavioral for CFRP composite lifting lug
Description:
Purpose
In the present study, a steel lifting lug is replaced with a composite (carbon fiber-reinforced epoxy [CFRP]) lifting lug made of a carbon/epoxy composite.
The purpose of this paper was to obtain a composite lifting lug with a higher level of strength that is capable of carrying loads without failure.
Design/methodology/approach
The vibration and static behaviors of steel and composite lifting lugs have been investigated using finite element analysis (FEA), ANSYS software.
The main consideration in the design of the composite (CFRP) lifting lug was that the displacement of both steel and composite lugs was the same under the same load.
Hence, by using the FEA displacement result of the steel lifting lug, the thickness of the composite lifting lug is determined using FEA.
Findings
Compared to the steel lifting lug, the composite (CFRP) lifting lug has much lower stresses and much higher natural frequencies.
Static behavior was experienced by the composite lifting lug, showing a reduction in von Mises stress, third principal stress and XZ shear stress, respectively, by 48.
4%, 34.
6% and 89.
8%, respectively, when compared with the steel lifting lug.
A higher natural frequency of mode shape swaying in X (258.
976√1,000 Hz) was experienced by the composite lifting lug when compared to the steel lifting lug (195.
935√1,000 Hz).
The safe strength of the design composite lifting lug has been proven by FEA results, which showed that the composite (CFRP) lifting lug has a higher factor of safety in all developed stresses than the steel lifting lug.
According to von Mises stress, the factor of safety of the composite lifting lug is increased by 76% when compared to the steel lifting lug.
The von Mises stress at the edge of the hole in the composite lifting lug is reduced from 23.
763 MPa to 20.
775 MPa when compared to the steel lifting lug.
Originality/value
This work presents the designed composite (CFRP) lifting lug, which will be able to carry loads with more safety than a steel one.
Related Results
CFRP Mooring Lines For Modu Applications
CFRP Mooring Lines For Modu Applications
Abstract
Precise station keeping is a requirement of mobile offshore drilling units (MODUs) and production vessels operating in ultra-deepwater. DeepSea Engineeri...
EVALUASI KINERJA ENERGI SERAP BALOK JEMBATAN KOMPOSIT KAYU LAMINASI-BETON BERLAPIS CFRP PADA BEBAN STATIS
EVALUASI KINERJA ENERGI SERAP BALOK JEMBATAN KOMPOSIT KAYU LAMINASI-BETON BERLAPIS CFRP PADA BEBAN STATIS
This study aims to analyse the ability of a glulam-concrete composite bridge beam coated with carbon fibre-reinforced polymer (CFRP) to absorb energy under static loading condition...
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
Recycled CFRP Plate Retrofitting using Adhesive and TRS for Steel Girders
AbstractThe retrofitting method using CFRP (Carbon Fiber Reinforced Plastic) plates was applied to a steel highway bridge in 2002 for the first time in Japan, where some of CFRP pl...
Numerical Investigation for Strengthening a Concrete Filled Steel Tube Composite Columns Using CFRP
Numerical Investigation for Strengthening a Concrete Filled Steel Tube Composite Columns Using CFRP
Hollow and concrete-filled steel tubes (CFSTs) are widely used as columns in many structural systems and local buckling can occur when they are subjected to axial compression loadi...
Lift Lug Design and Application
Lift Lug Design and Application
Abstract
For lift lug design there is a good attachment design reference in the Welding Research Council 537 specification (WRC537) that is useful for designing lift...
Effects of Tool-Edge Form during the Drilling of CFRP
Effects of Tool-Edge Form during the Drilling of CFRP
The drilling of carbon fiber reinforced plastics (CFRP) involves many problems such as an extremely short tool life or CFRP delamination occurring at the exit surface of drill. In ...
Numerical Simulation Model of Electrothermal De-Icing Process on Composite Substrate
Numerical Simulation Model of Electrothermal De-Icing Process on Composite Substrate
Abstract
A numerical simulation model of electrothermal de-icing process on carbon fiber reinforced polymer (CFRP) composite is conducted to study the effect of ther...
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
Development of Lightweight Thin-Walled Aluminum Bumper Reinforcement Adhered with Unidirectional CFRP Sheet
"Since bumper reinforcements are positioned at front/rear ends of vehicles, weight reduction of the bumper reinforcements improves vehicle dynamic performance by reducing a yaw mom...

