Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Analysis of the Mechanical Properties of Bricks Made from Recycled Polyethylene Terephthalate and Polylactic Acid Using Destructive Mechanical Testing

View through CrossRef
This study evaluates the mechanical and thermal properties of bricks made from polylactic acid (PLA) and recycled polyethylene terephthalate (rPET). A filament-based 3D printer was used with process parameters specific to PLA, while rPET—also known as recycled plastic—was obtained by grinding and compacting products. Brick samples of various dimensions were manufactured to conduct flexural, compressive, and tensile tests. Several samples were used for each test. On the other hand, a thermal conductivity analysis was performed to determine the internal temperature of dwellings, such as a house or a building. Thermal conductivity influences energy efficiency and the thermal comfort of occupants. The macrostructures observed in the NIKON microscope were examined, where the direction of the fibers and their compaction, which significantly influences thermal conductivity, can be seen. A 53.4% reduction in thermal conductivity was determined for the PLA brick compared to the commercial brick, while the rPET brick showed a 6.4% decrease. The evaluation of the tests carried out on the universal testing machine indicates that the brick made from rPET exhibits a higher maximum load and stress compared to the brick made from PLA in all tests. These results suggest that both the manufacturing process and the composition of the material have a significant impact on the mechanical and thermal properties of plastic bricks. In the flexural test, the recycled plastic brick withstood a maximum stress of 16 MPa and a maximum load of 5784 N. Similarly, in the compression test, the recycled plastic brick withstood a maximum load of 9471 N and a maximum stress of 5.83 MPa. During the tensile test, the rPET brick demonstrated a maximum load of 9203.92 N and a maximum stress of 5.64 MPa. These results show that bricks made from recycled plastic have better mechanical properties compared to polylactic acid bricks in the tests carried out and can therefore be considered for use in the construction industry.
Title: Analysis of the Mechanical Properties of Bricks Made from Recycled Polyethylene Terephthalate and Polylactic Acid Using Destructive Mechanical Testing
Description:
This study evaluates the mechanical and thermal properties of bricks made from polylactic acid (PLA) and recycled polyethylene terephthalate (rPET).
A filament-based 3D printer was used with process parameters specific to PLA, while rPET—also known as recycled plastic—was obtained by grinding and compacting products.
Brick samples of various dimensions were manufactured to conduct flexural, compressive, and tensile tests.
Several samples were used for each test.
On the other hand, a thermal conductivity analysis was performed to determine the internal temperature of dwellings, such as a house or a building.
Thermal conductivity influences energy efficiency and the thermal comfort of occupants.
The macrostructures observed in the NIKON microscope were examined, where the direction of the fibers and their compaction, which significantly influences thermal conductivity, can be seen.
A 53.
4% reduction in thermal conductivity was determined for the PLA brick compared to the commercial brick, while the rPET brick showed a 6.
4% decrease.
The evaluation of the tests carried out on the universal testing machine indicates that the brick made from rPET exhibits a higher maximum load and stress compared to the brick made from PLA in all tests.
These results suggest that both the manufacturing process and the composition of the material have a significant impact on the mechanical and thermal properties of plastic bricks.
In the flexural test, the recycled plastic brick withstood a maximum stress of 16 MPa and a maximum load of 5784 N.
Similarly, in the compression test, the recycled plastic brick withstood a maximum load of 9471 N and a maximum stress of 5.
83 MPa.
During the tensile test, the rPET brick demonstrated a maximum load of 9203.
92 N and a maximum stress of 5.
64 MPa.
These results show that bricks made from recycled plastic have better mechanical properties compared to polylactic acid bricks in the tests carried out and can therefore be considered for use in the construction industry.

Related Results

Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Mechanical performance of 100% recycled aggregate concrete (RAC) bricks
Urbanization and modern development of expanding infrastructure have resulted in large construction activities. With the expeditious growth in the construction industry, the rate o...
BIODEGRADABILITY OF POLYETHYLENE TEREPHTHALATE USING POLYETHYLENE TEREPHTHALATE DEPOLYMERASE PRODUCED BY Enterobacter aerogenes BFS8
BIODEGRADABILITY OF POLYETHYLENE TEREPHTHALATE USING POLYETHYLENE TEREPHTHALATE DEPOLYMERASE PRODUCED BY Enterobacter aerogenes BFS8
Plastic debris in great quantity and its persistence in the surroundings may disrupt ecological balance of the earth because plastics are difficult to degrade. This study was aimed...
Analysis of Thermal Performance of Polylactic Acid Nanocomposite by Using T-History Method
Analysis of Thermal Performance of Polylactic Acid Nanocomposite by Using T-History Method
In this study, we perceived the thermo-physical boundary and the thermal efficiency of zinc oxide for volume fraction in polylactic acid based on a heat energy storage system was e...
A Proposal for Recycling the World’s Unused Stockpiles of Treated Wastewater Sludge (Biosolids) in Fired-Clay Bricks
A Proposal for Recycling the World’s Unused Stockpiles of Treated Wastewater Sludge (Biosolids) in Fired-Clay Bricks
Millions of tonnes of leftover biosolids are increasingly stockpiled every year around the globe. Biosolids are a product of the wastewater sludge treatment process. Stockpiles nec...
Impact of parent concrete strength of recycled aggregates on the mechanical performance of RAC bricks
Impact of parent concrete strength of recycled aggregates on the mechanical performance of RAC bricks
Natural aggregate and attached mortar are the two main components of the recycled concrete aggregates (RCA), therefore, compared to natural concrete aggregates (NCA), RCA generally...
Comparison of the Quality of Building Bricks in Terms of Thermal Insulation and Energy Saving Using Building Information Modeling
Comparison of the Quality of Building Bricks in Terms of Thermal Insulation and Energy Saving Using Building Information Modeling
This study attempts to uncover the causes of the inefficient thermal performance of buildings in southern Libya. It conducted virtual tests (simulations) on some types of building...

Back to Top