Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

A Seventeen Multilevel High-Power Application Inverter with Low Total Harmonic Distortion

View through CrossRef
In this paper, a new topology of multilevel inverter (MLI) is designed with a fewer number of components and low total harmonic distortion (THD) for high-power photovoltaic (PV) systems. The key limitations of conventional MLI topologies are high total harmonic distortion (THD) and the use of a large number of switching components due to which the cost of the overall inverter is high. In conventional MLI, THD can be significantly reduced by the addition of a large value filter element at the input side; however, it will result in increased size and cost. Thus, achieving a pure sinusoidal AC at the output and to maintain a low THD level is a major issue in conventional MLIs. The proposed MLI has the advantage of decreasing the output THD by using a modified form of the cascaded H-Bridge structure and sine pulse width modulation technique. The proposed inverter consists of 6 unidirectional switches and 2 bidirectional switches, and there is no extra requirement for additional voltage balancing capacitors or clinching diodes. The individual switching states and SPWM operation for generating the gate pulses of the proposed MLI are discussed in detail. Relevant waveforms are plotted, equations are derived, and mathematical analysis is carried out. A steady-state analysis of the proposed MLI demonstrates an output voltage with 17 levels while using only four DC sources. Simulation results of the proposed MLI for single-phase and three-phase structures are obtained, and comparison is carried out with existing MLI topologies which shows that the proposed MLI has significantly low THD and better performance. From the results, it is clear that the proposed MLI has a THD of 3.52% in comparison with four conventional MLIs whose THDs are 6.1%, 6.63%, 7.3%, and 9.93%. Moreover, the proposed MLI generates 17 voltage levels by using only 08 switching devices, whereas the conventional MLIs use more than 10 switching devices for the generation of 15 voltage levels.
Title: A Seventeen Multilevel High-Power Application Inverter with Low Total Harmonic Distortion
Description:
In this paper, a new topology of multilevel inverter (MLI) is designed with a fewer number of components and low total harmonic distortion (THD) for high-power photovoltaic (PV) systems.
The key limitations of conventional MLI topologies are high total harmonic distortion (THD) and the use of a large number of switching components due to which the cost of the overall inverter is high.
In conventional MLI, THD can be significantly reduced by the addition of a large value filter element at the input side; however, it will result in increased size and cost.
Thus, achieving a pure sinusoidal AC at the output and to maintain a low THD level is a major issue in conventional MLIs.
The proposed MLI has the advantage of decreasing the output THD by using a modified form of the cascaded H-Bridge structure and sine pulse width modulation technique.
The proposed inverter consists of 6 unidirectional switches and 2 bidirectional switches, and there is no extra requirement for additional voltage balancing capacitors or clinching diodes.
The individual switching states and SPWM operation for generating the gate pulses of the proposed MLI are discussed in detail.
Relevant waveforms are plotted, equations are derived, and mathematical analysis is carried out.
A steady-state analysis of the proposed MLI demonstrates an output voltage with 17 levels while using only four DC sources.
Simulation results of the proposed MLI for single-phase and three-phase structures are obtained, and comparison is carried out with existing MLI topologies which shows that the proposed MLI has significantly low THD and better performance.
From the results, it is clear that the proposed MLI has a THD of 3.
52% in comparison with four conventional MLIs whose THDs are 6.
1%, 6.
63%, 7.
3%, and 9.
93%.
Moreover, the proposed MLI generates 17 voltage levels by using only 08 switching devices, whereas the conventional MLIs use more than 10 switching devices for the generation of 15 voltage levels.

Related Results

Modeling of A Single Phase 7-Level Cascaded H-Bridge Multilevel Inverter
Modeling of A Single Phase 7-Level Cascaded H-Bridge Multilevel Inverter
Recently, almost all industrial devices are mostly built on electronic devices which are precisely sensitive to harmonic. In order to meet the requirement from the industries deman...
Real-time mode of operation data analysis to catch the thread-tip denotes the failure cause of the grid-tie PV central inverter
Real-time mode of operation data analysis to catch the thread-tip denotes the failure cause of the grid-tie PV central inverter
AbstractThe inverter is considered the core of the PV power plant. The inverter’s failure leads to generation loss and decreases plant availability. So, it is required to investiga...
Comparative Study of Total Harmonic Distortion in Multilevel Inverters Based WECS
Comparative Study of Total Harmonic Distortion in Multilevel Inverters Based WECS
This paper presents comparative study of Total Harmonic Distortion (THD) and its individual harmonic contents without grid and with grid for Diode clamped multi level inverter (DCM...
Modeling and Analysis of Multilevel Inverter Topologies with Sustainable Energy
Modeling and Analysis of Multilevel Inverter Topologies with Sustainable Energy
Multilevel inverters (MLIs) have emerged as a foundational component in modern power electronics, particularly in medium- and high-voltage applications where conventional two-level...
Three Phase Eleven Level Modular Multilevel Inverter with PD-PWM for Grid Connected System
Three Phase Eleven Level Modular Multilevel Inverter with PD-PWM for Grid Connected System
The prominence of Modular Multilevel Inverters (MMI) is rising owing their merits of simple mechanical construction and good voltage sharing for semiconductor devices. Mostly Multi...
Single-Phase Cascaded Grid Connected Multilevel Inverter for Interfacing Renewable Energy Sources With Microgrid
Single-Phase Cascaded Grid Connected Multilevel Inverter for Interfacing Renewable Energy Sources With Microgrid
In this paper, a novel single-phase cascaded grid connected multilevel inverter (MLI) is proposed for feeding power to microgrid from renewable energy sources (RESs). The proposed ...
7 level symmetrical inverter for photovoltaic system
7 level symmetrical inverter for photovoltaic system
This research presents the design, implementation, and evaluation of a seven-level symmetrical inverter for photovoltaic systems. The inverter is based on a cascaded H-bridges topo...
A five‐level nested neutral point‐clamped inverter topology
A five‐level nested neutral point‐clamped inverter topology
Abstract Classical five‐level nested neutral point‐clamped (5L NNPC) inverter‐leg is a hybrid of the flying‐capacitor and diode‐clamped 5‐L inverter‐leg configura...

Back to Top