Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Comparison between the Dynamic Responses of Steel Buildings with Medium and Deep Columns under Several Seismic Intensities

View through CrossRef
Structural engineers often use deep columns in high seismic areas to reduce drifts, yet this somehow contradicts what is stated in some tests in the sense that even though deep columns may satisfy current seismic provisions, they can suffer premature twisting; this is an indication that a lot of research is needed in this area. Numerical and experimental studies have been conducted to estimate the response of steel buildings with medium and deep columns under the action of static and cyclic loading; however, studies accounting for the dynamic characteristics of buildings and strong motions are not common. In addition, responses in terms of local parameters have not been considered either. In this study, the nonlinear seismic responses of steel buildings with perimeter moment-resisting frames and medium (W14) columns are numerically calculated and compared to those of similar steel buildings with equivalent deep columns in terms of cost (W27 and larger). Low-, mid-, and high-rise steel building models with different dynamic characteristics, as well as several strong motions with different frequency contents, are considered. Results indicate that the drifts of the models with medium columns may be up to 140% greater than those of the models with deep columns. Significant reductions are also observed for top displacements, normalized interstory shears, and combined normalized axial loads and bending moments. Hence, the seismic demands of the buildings with deep columns may be much smaller than those of the buildings with medium columns and, therefore, the buildings with deep columns exhibit a superior behavior, which results in more economical designs. The reduction is greater for the case of low- and mid-rise buildings than for high-rise buildings. One of the reasons for this is that as medium columns are replaced by deep columns, the stiffness and the strength increase, which are lower in the tallest model.
Title: Comparison between the Dynamic Responses of Steel Buildings with Medium and Deep Columns under Several Seismic Intensities
Description:
Structural engineers often use deep columns in high seismic areas to reduce drifts, yet this somehow contradicts what is stated in some tests in the sense that even though deep columns may satisfy current seismic provisions, they can suffer premature twisting; this is an indication that a lot of research is needed in this area.
Numerical and experimental studies have been conducted to estimate the response of steel buildings with medium and deep columns under the action of static and cyclic loading; however, studies accounting for the dynamic characteristics of buildings and strong motions are not common.
In addition, responses in terms of local parameters have not been considered either.
In this study, the nonlinear seismic responses of steel buildings with perimeter moment-resisting frames and medium (W14) columns are numerically calculated and compared to those of similar steel buildings with equivalent deep columns in terms of cost (W27 and larger).
Low-, mid-, and high-rise steel building models with different dynamic characteristics, as well as several strong motions with different frequency contents, are considered.
Results indicate that the drifts of the models with medium columns may be up to 140% greater than those of the models with deep columns.
Significant reductions are also observed for top displacements, normalized interstory shears, and combined normalized axial loads and bending moments.
Hence, the seismic demands of the buildings with deep columns may be much smaller than those of the buildings with medium columns and, therefore, the buildings with deep columns exhibit a superior behavior, which results in more economical designs.
The reduction is greater for the case of low- and mid-rise buildings than for high-rise buildings.
One of the reasons for this is that as medium columns are replaced by deep columns, the stiffness and the strength increase, which are lower in the tallest model.

Related Results

Strength analysis of concrete-encased cellular steel columns
Strength analysis of concrete-encased cellular steel columns
This research investigates the compression behavior of bare cellular steel columns and concrete-encased cellular steel (CECS) columns subjected to concentric and eccentric loadings...
KONTESTASI TASAWUF SUNNÎ DAN TASAWUF FALSAFÎ DI NUSANTARA
KONTESTASI TASAWUF SUNNÎ DAN TASAWUF FALSAFÎ DI NUSANTARA
<p>This article scrutinizes the history of Islamic development in Nusantara between 15th to 18th centuries, which has been colored from theological mysticism thought. Uniquel...
Study on Anatomycal Structure of Watergum Wood (<i>Syzygium </i>sp.)
Study on Anatomycal Structure of Watergum Wood (<i>Syzygium </i>sp.)
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves /> <w:TrackFormatting /> &l...
A CHINA E A TRANSIÇÃO SOCIALISTA – UM BREVE BOSQUEJO
A CHINA E A TRANSIÇÃO SOCIALISTA – UM BREVE BOSQUEJO
<!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Revision>0</o:Revision> <o:TotalTime>0</o:TotalTime> <o:Pages>1</o:Pages> &...
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
This paper presents a theoretical method for simulation and three-dimensional reconstruction of the anatomical elements of the spine in order to achieve hydrogel disc prosthesis by...

Back to Top