Javascript must be enabled to continue!
Heat Gain Through Window With an Incompletely Closed External Shutter
View through CrossRef
Wndows are account for the most of the heat gain in buildings, and to reduce the heat gain, exterior metallic shutters are commonly installed in residential buildings in hot climates. The shutter is typically partially opened to illuminate the indoor space, but potentially reduces the thermal effectiveness of the shutter. Since the temperature difference between the window glass and shutter is high, natural convection, flow in induced in the space between the window and shutter. Experimental measurements are employed to study the effect of the shatter on the heat gain through the window during the month of June. The results indicate that when the shutter is partially opened, the heat gain through window is increased significantly, depending on the shutter opening distance.
Title: Heat Gain Through Window With an Incompletely Closed External Shutter
Description:
Wndows are account for the most of the heat gain in buildings, and to reduce the heat gain, exterior metallic shutters are commonly installed in residential buildings in hot climates.
The shutter is typically partially opened to illuminate the indoor space, but potentially reduces the thermal effectiveness of the shutter.
Since the temperature difference between the window glass and shutter is high, natural convection, flow in induced in the space between the window and shutter.
Experimental measurements are employed to study the effect of the shatter on the heat gain through the window during the month of June.
The results indicate that when the shutter is partially opened, the heat gain through window is increased significantly, depending on the shutter opening distance.
Related Results
Finite element analysis of three-hole socket with a shutter
Finite element analysis of three-hole socket with a shutter
Socket is an important low voltage electrical component, which is the key link of obtaining electric power as a daily necessity. The security of sockets is al-ways focused on when ...
Effect of ocean heat flux on Titan's topography and tectonic stresses
Effect of ocean heat flux on Titan's topography and tectonic stresses
INTRODUCTIONThe thermo-mechanical evolution of Titan's ice shell is primarily controlled by the mode of the heat transfer in the ice shell and the amount of heat coming from the oc...
Exploring Large Language Models Integration in the Histopathologic Diagnosis of Skin Diseases: A Comparative Study
Exploring Large Language Models Integration in the Histopathologic Diagnosis of Skin Diseases: A Comparative Study
Abstract
Introduction
The exact manner in which large language models (LLMs) will be integrated into pathology is not yet fully comprehended. This study examines the accuracy, bene...
Pengaruh Jumlah Foto dan Shutter Speed terhadap Penyimpangan Dimensi Hasil Pemindaian Objek pada Proses Reverse Engineering dengan Teknik Fotogrametri
Pengaruh Jumlah Foto dan Shutter Speed terhadap Penyimpangan Dimensi Hasil Pemindaian Objek pada Proses Reverse Engineering dengan Teknik Fotogrametri
Photogrammetry is a widely used technique in reverse engineering that utilizes photographs taken from multiple angles to capture the geometric structure and surface textures of phy...
Testing the Thermal Resistance and Power Capacity of Production Heat Pipes
Testing the Thermal Resistance and Power Capacity of Production Heat Pipes
In recent years heat pipes have become widely use in high performance air-cooled heat sinks for cooling electronics equipment. Such heat sinks rely on the heat pipes to collect hea...
Transient thermal characteristics of infrared window coupled radiative transfer subjected to high heat flux
Transient thermal characteristics of infrared window coupled radiative transfer subjected to high heat flux
<abstract>
<p>In infrared detection system on aircrafts, the infrared window, as an essential part, always faces heating condition generated by aerodynamic effects. ...
Magnesium Heat Sink Evaluations
Magnesium Heat Sink Evaluations
<div class="htmlview paragraph">A system has been constructed to estimate heat dissipated from geometrically identical heat sinks and pinfins extruded from magnesium (M1A) an...
Cutting Tool Temperature Analysis in Heat-Pipe Assisted Composite Machining
Cutting Tool Temperature Analysis in Heat-Pipe Assisted Composite Machining
Machining of advanced materials, such as composite, encounters high cutting temperatures and rapid tool wear because of the abrasive nature of the reinforcement phases in the workp...

