Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Doppler wind lidar activities at Cabauw

View through CrossRef
<p>Atmospheric motion and turbulence are essential parameters for weather and topics related to air quality. Therefore, wind profile measurements play an important role in atmospheric research and meteorology. One source of wind profile data are Doppler wind lidars, which are laser-based remote sensing instruments that measure wind speed and wind direction up to a few hundred meters or even a few kilometers. Commercial wind lidars use the laser wavelength of 1.5 µm and therefore backscatter is mainly from aerosols while clear air backscatter is minimal, limiting the range to the boundary layer typically.</p><p>We have carried out a two-year intercomparison of the ZephIR 300M (ZX Lidars) short-range wind lidar and tall mast wind measurements at Cabauw [1]. We have focused on the (height-dependent) data availability of the wind lidar under various meteorological conditions and the data quality through a comparison with in situ wind measurements at several levels in the 213m tall meteorological mast. We have found an overall availability of quality-controlled wind lidar data of 97% to 98 %, where the missing part is mainly due to precipitation events exceeding 1 mm/h or fog or low clouds below 100 m. The mean bias in the horizontal wind speed is within 0.1 m/s with a high correlation between the mast and wind lidar measurements, although under some specific conditions (very high wind speed, fog or low clouds) larger deviations are observed. This instrument is being deployed within North Sea wind farms.</p><p>Recently, a scanning long-range wind lidar Windcube 200S (Leosphere/Vaisala) has been installed at Cabauw, as part of the Ruisdael Observatory program [2]. The scanning Doppler wind lidars will provide detailed measurements of the wind field, aerosols and clouds around the Cabauw site, in coordination with other instruments, such as the cloud radar.</p><p>[1] Knoop, S., Bosveld, F. C., de Haij, M. J., and Apituley, A.: A 2-year intercomparison of continuous-wave focusing wind lidar and tall mast wind measurements at Cabauw, Atmos. Meas. Tech., 14, 2219–2235, 2021</p><p>[2] https://ruisdael-observatory.nl/</p>
Title: Doppler wind lidar activities at Cabauw
Description:
<p>Atmospheric motion and turbulence are essential parameters for weather and topics related to air quality.
Therefore, wind profile measurements play an important role in atmospheric research and meteorology.
One source of wind profile data are Doppler wind lidars, which are laser-based remote sensing instruments that measure wind speed and wind direction up to a few hundred meters or even a few kilometers.
Commercial wind lidars use the laser wavelength of 1.
5 µm and therefore backscatter is mainly from aerosols while clear air backscatter is minimal, limiting the range to the boundary layer typically.
</p><p>We have carried out a two-year intercomparison of the ZephIR 300M (ZX Lidars) short-range wind lidar and tall mast wind measurements at Cabauw [1].
We have focused on the (height-dependent) data availability of the wind lidar under various meteorological conditions and the data quality through a comparison with in situ wind measurements at several levels in the 213m tall meteorological mast.
We have found an overall availability of quality-controlled wind lidar data of 97% to 98 %, where the missing part is mainly due to precipitation events exceeding 1 mm/h or fog or low clouds below 100 m.
The mean bias in the horizontal wind speed is within 0.
1 m/s with a high correlation between the mast and wind lidar measurements, although under some specific conditions (very high wind speed, fog or low clouds) larger deviations are observed.
This instrument is being deployed within North Sea wind farms.
</p><p>Recently, a scanning long-range wind lidar Windcube 200S (Leosphere/Vaisala) has been installed at Cabauw, as part of the Ruisdael Observatory program [2].
The scanning Doppler wind lidars will provide detailed measurements of the wind field, aerosols and clouds around the Cabauw site, in coordination with other instruments, such as the cloud radar.
</p><p>[1] Knoop, S.
, Bosveld, F.
C.
, de Haij, M.
J.
, and Apituley, A.
: A 2-year intercomparison of continuous-wave focusing wind lidar and tall mast wind measurements at Cabauw, Atmos.
Meas.
Tech.
, 14, 2219–2235, 2021</p><p>[2] https://ruisdael-observatory.
nl/</p>.

Related Results

Wind lidars within Dutch offshore wind farms
Wind lidars within Dutch offshore wind farms
The growing number of wind farms in the Dutch part of the North Sea [1] offers the necessity, as well as the opportunity, to measure the meteorological conditions at these location...
Scanning Doppler wind lidar at Ruisdael Observatory
Scanning Doppler wind lidar at Ruisdael Observatory
<p>The Ruisdael Observatory [1] is a national initiative, a nationwide observatory for measurements of the atmosphere. It is set up to enable more concrete, detailed ...
Scanning Doppler lidar at Cabauw: study of the convective boundary layer in the summer of 2022
Scanning Doppler lidar at Cabauw: study of the convective boundary layer in the summer of 2022
A scanning Doppler lidar, the  Windcube200S (Vaisala/Leosphere), has been operating at our research site Cabauw since April 2021, to provide detailed measurements of the w...
Development of a multimodal imaging system based on LIDAR
Development of a multimodal imaging system based on LIDAR
(English) Perception of the environment is an essential requirement for the fields of autonomous vehicles and robotics, that claim for high amounts of data to make reliable decisio...
Mapping horizontal wind speed using a single Doppler Wind Lidar scanning horizontally: a test case over Paris
Mapping horizontal wind speed using a single Doppler Wind Lidar scanning horizontally: a test case over Paris
Scanning Doppler Wind Lidars are used in a variety of applications, thanks to the versatility brought by their scanning head. Their principal output is the wind speed along the lid...
Unraveling the lidar-turbulence paradox
Unraveling the lidar-turbulence paradox
The meteorological community, and in particular the wind energy community, have been trying to establish a methodology to correct/convert turbulence measures derived from measureme...
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm
Background: In a wind farm, the wind speed of the downstream wind turbine will be lower than the wind speed of the upstream wind turbine due to the influence of the wake. Therefore...
A novel airborne Doppler lidar system design for highresolution wind measurements
A novel airborne Doppler lidar system design for highresolution wind measurements
Wind is a core state variable of the atmosphere. Accurate weather predictions and a better understanding of atmospheric dynamics, transport and dispersion require improved wind inf...

Back to Top