Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor
View through CrossRef
Abstract
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC. The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC. The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate. The injector atomization effect is better when the aperture is 1.4 mm, the atomization particle size range is 71.8–119.8 μm. PDC using different injectors can achieve stable operation in the range of 5–20 Hz. Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
Walter de Gruyter GmbH
Title: Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor
Description:
Abstract
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC.
The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC.
The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate.
The injector atomization effect is better when the aperture is 1.
4 mm, the atomization particle size range is 71.
8–119.
8 μm.
PDC using different injectors can achieve stable operation in the range of 5–20 Hz.
Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
Related Results
Research on the Combustion Mode and Thrust Performance of Rotating Detonation Scrarmjet Engines
Research on the Combustion Mode and Thrust Performance of Rotating Detonation Scrarmjet Engines
Abstract
This article primarily focuses on the numerical simulation and theoretical analysis of these two combustion modes:deflagration and detonation. The research indicat...
Experimental Study on Characteristics of Conical Spray and Combustion for Medium Speed D.I. Diesel Engine
Experimental Study on Characteristics of Conical Spray and Combustion for Medium Speed D.I. Diesel Engine
<div class="htmlview paragraph">This paper inverstigates a new way of conical spray for medium speed D. I. diesel engine, with which three different construction injectors we...
Advances on Deflagration to Detonation Transition Methods in Pulse Detonation Engines
Advances on Deflagration to Detonation Transition Methods in Pulse Detonation Engines
Pulse detonation engines (PDEs) have become a transformative technology in the field of aerospace propulsion due to the high thermal efficiency of detonation combustion. However, i...
Combustor Effusion Cooling Multiparameter Aerothermal Numerical Analysis
Combustor Effusion Cooling Multiparameter Aerothermal Numerical Analysis
The solid temperature prediction is one of the most widespread type of modelization used in the industry. One reading this study might wonder why there would be readymade solutions...
Study on Structure Parameters of Reverse Circulation Drill Bit Secondary Injector Device Based on Injector Coefficient
Study on Structure Parameters of Reverse Circulation Drill Bit Secondary Injector Device Based on Injector Coefficient
Abstract
The hollow-through DTH hammer reverse circulation continuous coring drilling technology has been successfully applied to well drilling. During its applicati...
Reacting Flow Characteristics and Multifuel Capabilities of a Multi-Nozzle Dry Low NOx Combustor: A Numerical Analysis
Reacting Flow Characteristics and Multifuel Capabilities of a Multi-Nozzle Dry Low NOx Combustor: A Numerical Analysis
The fluctuating quality of natural gas (NG) in Peninsular Malaysia (PM) makes it challenging for the gas turbine (GT) combustor to meet the combustion performance requirements from...
Atomization and combustion characteristics of a fuel–water rapid internal mixing injector
Atomization and combustion characteristics of a fuel–water rapid internal mixing injector
In this study, we investigated the atomization characteristics of rapid internal mixing injector (RIM injector) developed in our laboratory. RIM injector successfully emulsifies ba...
Three-Dimensional Numerical Simulation of High-Speed Shear Crushing of High-Density Fluid
Three-Dimensional Numerical Simulation of High-Speed Shear Crushing of High-Density Fluid
Plasma atomization is a technology that can produce high sphericity, small particle diameters, and high-purity copper powder, which is of great significance for the development of ...