Javascript must be enabled to continue!
Variability of fast-ice thickness in Spitsbergen fjords
View through CrossRef
AbstractDetailed measurements of Sea-ice thickness and Snow on Sea ice were recorded at different locations in fjords along the western coast of Spitsbergen, the largest island in the Svalbard archipelago, in 2004. Data corresponding to the ice Situation before and after melt onset were collected for Kongsfjorden and Van Mijenfjorden, while Hornsund was investigated once during early Spring. Profiles of total thickness (snow plus ice thickness) were measured, together with Some Snow-thickness measurements. Total thicknesses were measured with a portable electromagnetic instrument and at Selected Sites by drilling. The three fjords Show Some differences in measured thicknesses, connected to individual conditions. However, total thickness does not differ Substantially between the three fjords before melt onset. The modal total thickness for all three fjords before melt onset was 1.075 m, and the corresponding modal Snow thickness was 0.225 m (bin width 0.05 m). Long-term Kongsfjorden ice-thickness data Since 1997 Show that the maximum ice thickness varies Significantly interannually, as observed at other Arctic Sites. The average maximum ice thickness for Kongsfjorden was 0.71 m (years 1997–98, 2000 and 2002–05), and the respective average maximum Snow thickness was 0.22 m. In Kongsfjorden, 2004 was the year with highest maximum total thickness and Snow thickness relative to the other years.
Title: Variability of fast-ice thickness in Spitsbergen fjords
Description:
AbstractDetailed measurements of Sea-ice thickness and Snow on Sea ice were recorded at different locations in fjords along the western coast of Spitsbergen, the largest island in the Svalbard archipelago, in 2004.
Data corresponding to the ice Situation before and after melt onset were collected for Kongsfjorden and Van Mijenfjorden, while Hornsund was investigated once during early Spring.
Profiles of total thickness (snow plus ice thickness) were measured, together with Some Snow-thickness measurements.
Total thicknesses were measured with a portable electromagnetic instrument and at Selected Sites by drilling.
The three fjords Show Some differences in measured thicknesses, connected to individual conditions.
However, total thickness does not differ Substantially between the three fjords before melt onset.
The modal total thickness for all three fjords before melt onset was 1.
075 m, and the corresponding modal Snow thickness was 0.
225 m (bin width 0.
05 m).
Long-term Kongsfjorden ice-thickness data Since 1997 Show that the maximum ice thickness varies Significantly interannually, as observed at other Arctic Sites.
The average maximum ice thickness for Kongsfjorden was 0.
71 m (years 1997–98, 2000 and 2002–05), and the respective average maximum Snow thickness was 0.
22 m.
In Kongsfjorden, 2004 was the year with highest maximum total thickness and Snow thickness relative to the other years.
Related Results
Ice Management for Floating Ice Offshore Operations
Ice Management for Floating Ice Offshore Operations
Abstract
This paper describes the practicalities and principles of use of icebreakers in support of ice offshore operations, and specifically their efficiency in ...
Modelling very recent ice ages on Mars with the Planetary Climate Model
Modelling very recent ice ages on Mars with the Planetary Climate Model
Protected by centimeters of dry sediments, a planetary-scale mantle of relatively pure water ice covers the entire mid and high latitudes of Mars. Its presence down has been shown ...
Viscous relaxation of Pluto's ice shell below Sputnik Planitia
Viscous relaxation of Pluto's ice shell below Sputnik Planitia
AbstractThe surface of Pluto is dominated by the Sputnik Planitia basin, possibly caused by an impact ~ 4 Gyr ago. To explain basin's unlikely position close to tidal axis with Cha...
Constraining Ceres' exposed ice: grain size, abundance, and is it salty?
Constraining Ceres' exposed ice: grain size, abundance, and is it salty?
Ubiquitous phyllosilicates and carbonates in Ceres’ surface regolith reveal extensive water-rock interaction in the past [1]. A key area of continued study is the water i...
Effect of ocean heat flux on Titan's topography and tectonic stresses
Effect of ocean heat flux on Titan's topography and tectonic stresses
INTRODUCTIONThe thermo-mechanical evolution of Titan's ice shell is primarily controlled by the mode of the heat transfer in the ice shell and the amount of heat coming from the oc...
Eccentricity variations trigger “subduction” in Europa’s ice shell
Eccentricity variations trigger “subduction” in Europa’s ice shell
IntroductionIcy moon Europa possesses one of the youngest surfaces in the Solar System. Overall smooth, yet rich in unique tectonic features, it records mostly extensional processe...
Winter growth and tidal variability of the sub-ice platelet layer observed with electromagnetic induction soundings
Winter growth and tidal variability of the sub-ice platelet layer observed with electromagnetic induction soundings
Abstract. Here, we present the first electromagnetic induction time-series measurements of ice shelf-influenced fast ice and sub-ice platelet layer thickness over winter and in lat...
Seasonal and diurnal variability of sub-ice platelet layer thickness in McMurdo Sound from electromagnetic induction sounding
Seasonal and diurnal variability of sub-ice platelet layer thickness in McMurdo Sound from electromagnetic induction sounding
Abstract. Here, we present observations of temporal variability of sub-ice platelet layer over seasonal and diurnal timescales under Ice Shelf Water-influenced fast ice in McMurdo ...

