Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
A Field Survey of Soil Corrosivity Based on Electrical Resistivity Method
View through CrossRef
Salah satu upaya mitigasi bencana yang perlu dilakukan sebelum pembangunan fasilitas pada kawasan industri yaitu kajian korositivitas tanah. Sifat korositivitas dapat menyebabkan rusaknya infrastruktur bangunan dalam ambang batas tertentu, Kajian korositivitas tanah telah dilakukan pada kawasan industri Kecamatan Julok, Kabupaten Aceh Timur dengan tujuan untuk melakukan investigasi dan pemetaan tingkat korositivitas tanah menggunakan metode resistivitas Wenner 4 pin dan perhitungan pH meter untuk tanah. Akuisisi data dilakukan dengan titik pengukuran sebanyak tujuh titik, dimana setiap titik pengukuran data terdistribusi pada lokasi yang akan digunakan untuk pembangunan industri dengan total panjang lintasan pengukuran 6 km. Hasil pengolahan data resistivitas 1D diperoleh dua jenis pelapisan tanah. Lapisan pertama lebih didominasi oleh kondisi tanah yang tidak korosif dengan nilai resistivitas 20 – 580 Ohm.m. Sedangkan lapisan kedua dapat diduga sebagai lapisan yang korosif dengan nilai resistivitas tanah 5 – 20 Ohm.m. One of the disaster mitigation that needs to be done before facilities development in industrial area is study of soil corrosivity. Within a certain threshold, this corrosivity can cause damage to building infrastructure. This research was done in the industrial area of Julok Subdistrict, East Aceh Regency with the aim of investigating and mapping the level of soil corrosion using a 4-pin Wenner resistivity method and calculating the pH for soil. Data acquisition was carried out at seven measurement point, where each measurement point is distributed at a location that will be used for industrial development with 6 km length. Inversion of resistivity data gives two type of soil layer. The first layer is more complete by non-corrosive soil conditions with resistivity values of 20 - 580 Ohm.m. While the second layer can be interpreted as a corrosive layer with a soil resistivity value of 5-20 Ohm.m. Keywords: korosi, resistivitas, wenner, pH, mitigasi bencana
Title: A Field Survey of Soil Corrosivity Based on Electrical Resistivity Method
Description:
Salah satu upaya mitigasi bencana yang perlu dilakukan sebelum pembangunan fasilitas pada kawasan industri yaitu kajian korositivitas tanah.
Sifat korositivitas dapat menyebabkan rusaknya infrastruktur bangunan dalam ambang batas tertentu, Kajian korositivitas tanah telah dilakukan pada kawasan industri Kecamatan Julok, Kabupaten Aceh Timur dengan tujuan untuk melakukan investigasi dan pemetaan tingkat korositivitas tanah menggunakan metode resistivitas Wenner 4 pin dan perhitungan pH meter untuk tanah.
Akuisisi data dilakukan dengan titik pengukuran sebanyak tujuh titik, dimana setiap titik pengukuran data terdistribusi pada lokasi yang akan digunakan untuk pembangunan industri dengan total panjang lintasan pengukuran 6 km.
Hasil pengolahan data resistivitas 1D diperoleh dua jenis pelapisan tanah.
Lapisan pertama lebih didominasi oleh kondisi tanah yang tidak korosif dengan nilai resistivitas 20 – 580 Ohm.
m.
Sedangkan lapisan kedua dapat diduga sebagai lapisan yang korosif dengan nilai resistivitas tanah 5 – 20 Ohm.
m.
One of the disaster mitigation that needs to be done before facilities development in industrial area is study of soil corrosivity.
Within a certain threshold, this corrosivity can cause damage to building infrastructure.
This research was done in the industrial area of Julok Subdistrict, East Aceh Regency with the aim of investigating and mapping the level of soil corrosion using a 4-pin Wenner resistivity method and calculating the pH for soil.
Data acquisition was carried out at seven measurement point, where each measurement point is distributed at a location that will be used for industrial development with 6 km length.
Inversion of resistivity data gives two type of soil layer.
The first layer is more complete by non-corrosive soil conditions with resistivity values of 20 - 580 Ohm.
m.
While the second layer can be interpreted as a corrosive layer with a soil resistivity value of 5-20 Ohm.
m.
Keywords: korosi, resistivitas, wenner, pH, mitigasi bencana.
Related Results
Subsurface Corrosivity Assessment Using Subsoil Resistivity in a Typical Basement Terrain: A Case Study of the Adebowale Area in Akure, Southwestern Nigeria
Subsurface Corrosivity Assessment Using Subsoil Resistivity in a Typical Basement Terrain: A Case Study of the Adebowale Area in Akure, Southwestern Nigeria
The aim of this study is to investigate and map the subsurface corrosivity of soils at various depths (0.5 - 3.0 m) within the Adebowale community in Akure, Southwestern Nigeria, a...
Ecological soil physics as section of ecological soil science
Ecological soil physics as section of ecological soil science
Nowadays, there is a general penetration of ecology in other related sciences. Soil science is not an exception. To the evidence of this, the works of soil scientists may serve, th...
Numerical simulation of the relationship between resistivity and microscopic pore structure of sandstone
Numerical simulation of the relationship between resistivity and microscopic pore structure of sandstone
AbstractThe microscopic pore structure of the sandstone rock layer determines the water richness and permeability of the rock layer. Mastering the relationship between the resistiv...
Field Testing of a Propagation At-Bit Resistivity Tool
Field Testing of a Propagation At-Bit Resistivity Tool
Despite its great potential in geosteering, geostopping, well placement, and other applications, at-bit propagation resistivity technology has seen little progress in the past 40 y...
UTILISING 2-D RESISTIVITY IMAGING TOMOGRAPHY IN INVESTIGATING STRUCTURAL FAILURE IN SOME BUILDINGS IN ADANKOLO CAMPUS OF FEDERAL UNIVERSITY LOKOJA, NIGERIAN NORTH CENTRAL AREA
UTILISING 2-D RESISTIVITY IMAGING TOMOGRAPHY IN INVESTIGATING STRUCTURAL FAILURE IN SOME BUILDINGS IN ADANKOLO CAMPUS OF FEDERAL UNIVERSITY LOKOJA, NIGERIAN NORTH CENTRAL AREA
One of the most used geophysical tools for characterization of the near surface is electrical resistivity tomography (ERT). The 2D resistivity survey was conducted along ten (10) b...
EPD Electronic Pathogen Detection v1
EPD Electronic Pathogen Detection v1
Electronic pathogen detection (EPD) is a non - invasive, rapid, affordable, point- of- care test, for Covid 19 resulting from infection with SARS-CoV-2 virus. EPD scanning techno...
Soil-Available Nutrients Associated with Soil Chemical and Aggregate Properties following Vegetation Restoration in Western Sichuan, China
Soil-Available Nutrients Associated with Soil Chemical and Aggregate Properties following Vegetation Restoration in Western Sichuan, China
The status and drivers of soil-available nutrients in plant-recovered soils are not fully understood, limiting our ability to explore the role of soil-available nutrients in soil g...
Evaluation of digital maps of top-soil properties compared to large-scale laboratory soil data and synergies towards a better European soils’ delineation. 
Evaluation of digital maps of top-soil properties compared to large-scale laboratory soil data and synergies towards a better European soils’ delineation. 
Soil maps describe spatial variability by using traditional or predictive soil mapping techniques. Conventional soil maps group soils based on their similar cartographic properties...