Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Investigation on Finishing Characteristics of Magnetic Abrasive Finishing Process Using an Alternating Magnetic Field
View through CrossRef
The magnetic abrasive finishing (MAF) process is an ultra-precision surface finishing process. In order to further improve the finishing efficiency and surface quality, the MAF process using an alternating magnetic field was proposed in the previous research, and it was proven that the alternating magnetic field has advantages compared with the static magnetic field. In order to further develop the process, this study investigated the effect on finishing characteristics when the alternating current waveform is a square wave. The difference between the fluctuation behavior of the magnetic cluster in two alternating magnetic fields (sine wave and square wave) is observed and analyzed. Through analysis, it can be concluded that the use of a square wave can make the magnetic cluster fluctuate faster, and as the size of the magnetic particles decreases, the difference between the magnetic cluster fluctuation speed of the two waveforms is greater. The experimental results show that the surface roughness of SUS304 stainless steel plate improves from 328 nm Ra to 14 nm Ra within 40 min.
Title: Investigation on Finishing Characteristics of Magnetic Abrasive Finishing Process Using an Alternating Magnetic Field
Description:
The magnetic abrasive finishing (MAF) process is an ultra-precision surface finishing process.
In order to further improve the finishing efficiency and surface quality, the MAF process using an alternating magnetic field was proposed in the previous research, and it was proven that the alternating magnetic field has advantages compared with the static magnetic field.
In order to further develop the process, this study investigated the effect on finishing characteristics when the alternating current waveform is a square wave.
The difference between the fluctuation behavior of the magnetic cluster in two alternating magnetic fields (sine wave and square wave) is observed and analyzed.
Through analysis, it can be concluded that the use of a square wave can make the magnetic cluster fluctuate faster, and as the size of the magnetic particles decreases, the difference between the magnetic cluster fluctuation speed of the two waveforms is greater.
The experimental results show that the surface roughness of SUS304 stainless steel plate improves from 328 nm Ra to 14 nm Ra within 40 min.
Related Results
Study on Electrochemical Effects Assisted Magnetic Abrasive Finishing for Finishing Stainless Steel SUS304
Study on Electrochemical Effects Assisted Magnetic Abrasive Finishing for Finishing Stainless Steel SUS304
Abstract
In order to obtain a high accuracy with high machining efficiency for finishing hard alloy metal material, we proposed a hybrid finishing method which is electroch...
Experimental Investigations Into the Finishing Force and Torque in Magnetic Abrasive Finishing Process
Experimental Investigations Into the Finishing Force and Torque in Magnetic Abrasive Finishing Process
Magnetic abrasive finishing (MAF) is a finishing process in which surface is finished by removing the material in the form of micro-chips by the magnetic and abrasive particles in ...
Selection of Abrasive for Chemical Mechanical Polishing of the 304 Stainless Steel
Selection of Abrasive for Chemical Mechanical Polishing of the 304 Stainless Steel
Abstract
Chemical mechanical polishing (CMP) technology is widely used in ultra-precision machining of various materials, and the abrasive are an important component...
Magnetic cloak made of NdFeB permanent magnetic material
Magnetic cloak made of NdFeB permanent magnetic material
In the past few years, the concept of an electromagnetic invisibility cloak has received much attention. Based on the pioneering theoretical work, invisibility cloaks have been gre...
Mathematical model of heat distribution in an abrasive wheel
Mathematical model of heat distribution in an abrasive wheel
The cost of abrasive cutting is mainly determined by the wear resistance of the abrasive wheel, which consists of abrasive grain, filler, phenolic binder and glass mesh. Due to the...
Study on the correlation between grain size and processing limit in abrasive flow machining
Study on the correlation between grain size and processing limit in abrasive flow machining
Abstract
The influence of particle size on the abrasive flow machining mechanism and processing limit was studied by establishing the processing model of different p...
Impregnation of abrasive tools as a method of improving grinding results
Impregnation of abrasive tools as a method of improving grinding results
The interaction between the abrasive and the abraded material during grinding is accompanied by a high level of activation of the surface in contact, which initiates, strengthens, ...