Javascript must be enabled to continue!
Cefazolin Loaded Oxidized Regenerated Cellulose/Polycaprolactone Bilayered Composite for Use as Potential Antibacterial Dural Substitute
View through CrossRef
Oxidized regenerated cellulose/polycaprolactone bilayered composite (ORC/PCL bilayered composite) was investigated for use as an antibacterial dural substitute. Cefazolin at the concentrations of 25, 50, 75 and 100 mg/mL was loaded in the ORC/PCL bilayered composite. Microstructure, density, thickness, tensile properties, cefazolin loading content, cefazolin releasing profile and antibacterial activity against S. aureus were measured. It was seen that the change in concentration of cefazolin loading affected the microstructure of the composite on the rough side, but not on the dense or smooth side. Cefazolin loaded ORC/PCL bilayered composite showed greater densities, but lower thickness, compared to those of drug unloaded composite. Tensile modulus was found to be greater and increased with increasing cefazolin loading, but tensile strength and strain at break were lower compared to the drug unloaded composite. In vitro cefazolin release in artificial cerebrospinal fluid (aCSF) consisted of initial burst release on day 1, followed by a constant small release of cefazolin. The antibacterial activity was observed to last for up to 4 days depending on the cefazolin loading. All these results suggested that ORC/PCL bilayered composite could be modified to serve as an antibiotic carrier for potential use as an antibacterial synthetic dura mater.
Title: Cefazolin Loaded Oxidized Regenerated Cellulose/Polycaprolactone Bilayered Composite for Use as Potential Antibacterial Dural Substitute
Description:
Oxidized regenerated cellulose/polycaprolactone bilayered composite (ORC/PCL bilayered composite) was investigated for use as an antibacterial dural substitute.
Cefazolin at the concentrations of 25, 50, 75 and 100 mg/mL was loaded in the ORC/PCL bilayered composite.
Microstructure, density, thickness, tensile properties, cefazolin loading content, cefazolin releasing profile and antibacterial activity against S.
aureus were measured.
It was seen that the change in concentration of cefazolin loading affected the microstructure of the composite on the rough side, but not on the dense or smooth side.
Cefazolin loaded ORC/PCL bilayered composite showed greater densities, but lower thickness, compared to those of drug unloaded composite.
Tensile modulus was found to be greater and increased with increasing cefazolin loading, but tensile strength and strain at break were lower compared to the drug unloaded composite.
In vitro cefazolin release in artificial cerebrospinal fluid (aCSF) consisted of initial burst release on day 1, followed by a constant small release of cefazolin.
The antibacterial activity was observed to last for up to 4 days depending on the cefazolin loading.
All these results suggested that ORC/PCL bilayered composite could be modified to serve as an antibiotic carrier for potential use as an antibacterial synthetic dura mater.
Related Results
Cost-effectiveness analysis of 2 g of cefazolin compared with 1 g of cefazolin as prophylactic antibiotics in cesarean section at the Mekong Maternity Hospital from 2021 to 2022
Cost-effectiveness analysis of 2 g of cefazolin compared with 1 g of cefazolin as prophylactic antibiotics in cesarean section at the Mekong Maternity Hospital from 2021 to 2022
Objective: To investigate the cost-effectiveness of using the prophylactic antibiotic cefazolin during cesarean section with a dose of 2 g compared to 1 g by clinical practice at t...
Dural Tears in Pediatric Spine Surgery
Dural Tears in Pediatric Spine Surgery
Introduction Dural tears during spine surgery in children may result in neurological impairment and surgical site infections. Material and Methods Study design: Cohort analysis. A ...
NONLINEAR STATIC ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS
NONLINEAR STATIC ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS
This paper presents the results of the geometric nonlinear analysis of composite shell subjected to static load by using an edge-based smoothed finite elements (ES) and the mixed i...
Ionic liquid-assisted the preparation of transparent cellulosic biocomposite films
Ionic liquid-assisted the preparation of transparent cellulosic biocomposite films
(English) Interest in new environmentally friendly cellulose-based products has tremendously increased in recent years.
Cellulose-based composites come in various forms and have p...
The comparison of cellulose regeneration behavior in different solvents after sulfuric acid treatment
The comparison of cellulose regeneration behavior in different solvents after sulfuric acid treatment
Abstract
Background
The efficient utilization of cellulose requires certain treatments. Regeneration of cellulose after dissolving it using chemical reagents is one of the...
Waterjet dissection in pediatric cranioplasty
Waterjet dissection in pediatric cranioplasty
Object
Waterjet dissection has been shown to separate tissues of different resistance, with preservation of blood vessels. In cranioplasty, separation of subcutaneous tissue and du...
Multiscale characterization of microstructural reconfiguration induced by oxidation in lignite from the Lingquan mining colliery
Multiscale characterization of microstructural reconfiguration induced by oxidation in lignite from the Lingquan mining colliery
Abstract
The microstructure changes of Lingquan mine oxidized lignite at different oxidation temperatures and the influence of low-temperature oxidation on the spontaneou...
Nanofibrous Polycaprolactone Membrane with Bioactive Glass and Atorvastatin for Wound Healing: Preparation and Characterization
Nanofibrous Polycaprolactone Membrane with Bioactive Glass and Atorvastatin for Wound Healing: Preparation and Characterization
Skin wound healing is one of the most challenging processes for skin reconstruction, especially after severe injuries. In our study, nanofiber membranes were prepared for wound hea...

