Javascript must be enabled to continue!
Incorporating multislice imaging into x‐ray CT polymer gel dosimetry
View through CrossRef
Purpose:To evaluate multislice computed tomography (CT) scanning for fast and reliable readout of radiation therapy (RT) dose distributions using CT polymer gel dosimetry (PGD) and to establish a baseline assessment of image noise and uniformity in an unirradiated gel dosimeter.Methods:A 16‐slice CT scanner was used to acquire images through a 1 L cylinder filled with water. Additional images were collected using a single slice machine. The variability in CT number (NCT) associated with the anode heel effect was evaluated and used to define a new slice‐by‐slice background subtraction artifact removal technique for CT PGD. Image quality was assessed for the multislice system by evaluating image noise and uniformity. The agreement in NCT for slices acquired simultaneously using the multislice detector array was also examined. Further study was performed to assess the effects of increasing x‐ray tube load on the constancy of measured NCT and overall scan time. In all cases, results were compared to the single slice machine. Finally, images were collected throughout the volume of an unirradiated gel dosimeter to quantify image noise and uniformity before radiation is delivered.Results:Slice‐by‐slice background subtraction effectively removes the variability in NCT observed across images acquired simultaneously using the multislice scanner and is the recommended background subtraction method when using a multislice CT system. Image noise was higher for the multislice system compared to the single slice scanner, but overall image quality was comparable between the two systems. Further study showed NCT was consistent across image slices acquired simultaneously using the multislice detector array for each detector configuration of the slice thicknesses examined. In addition, the multislice system was found to eliminate variations in NCT due to increasing x‐ray tube load and reduce scanning time by a factor of 4 when compared to imaging a large volume using a single slice scanner. Images acquired through an unirradiated, active gel revealed NCT varies between the top and bottom of the 1 L cylinder as well as across the diameter of the cylinder by up to 7 HU.Conclusions:Multislice CT imaging has been evaluated for CT PGD and found to be the superior technique compared to single slice imaging in terms of the time required to complete a scan and the tube load characteristics associated with each scanning method. The implementation of multislice scanning is straightforward and expected to facilitate routine gel dosimetry measurements for complex dose distributions in modern RT centers.
Title: Incorporating multislice imaging into x‐ray CT polymer gel dosimetry
Description:
Purpose:To evaluate multislice computed tomography (CT) scanning for fast and reliable readout of radiation therapy (RT) dose distributions using CT polymer gel dosimetry (PGD) and to establish a baseline assessment of image noise and uniformity in an unirradiated gel dosimeter.
Methods:A 16‐slice CT scanner was used to acquire images through a 1 L cylinder filled with water.
Additional images were collected using a single slice machine.
The variability in CT number (NCT) associated with the anode heel effect was evaluated and used to define a new slice‐by‐slice background subtraction artifact removal technique for CT PGD.
Image quality was assessed for the multislice system by evaluating image noise and uniformity.
The agreement in NCT for slices acquired simultaneously using the multislice detector array was also examined.
Further study was performed to assess the effects of increasing x‐ray tube load on the constancy of measured NCT and overall scan time.
In all cases, results were compared to the single slice machine.
Finally, images were collected throughout the volume of an unirradiated gel dosimeter to quantify image noise and uniformity before radiation is delivered.
Results:Slice‐by‐slice background subtraction effectively removes the variability in NCT observed across images acquired simultaneously using the multislice scanner and is the recommended background subtraction method when using a multislice CT system.
Image noise was higher for the multislice system compared to the single slice scanner, but overall image quality was comparable between the two systems.
Further study showed NCT was consistent across image slices acquired simultaneously using the multislice detector array for each detector configuration of the slice thicknesses examined.
In addition, the multislice system was found to eliminate variations in NCT due to increasing x‐ray tube load and reduce scanning time by a factor of 4 when compared to imaging a large volume using a single slice scanner.
Images acquired through an unirradiated, active gel revealed NCT varies between the top and bottom of the 1 L cylinder as well as across the diameter of the cylinder by up to 7 HU.
Conclusions:Multislice CT imaging has been evaluated for CT PGD and found to be the superior technique compared to single slice imaging in terms of the time required to complete a scan and the tube load characteristics associated with each scanning method.
The implementation of multislice scanning is straightforward and expected to facilitate routine gel dosimetry measurements for complex dose distributions in modern RT centers.
Related Results
579. Epidemiological Data Differences between Gel-purified vs. DNA-purified Oral Polio Vaccine in environmental samples
579. Epidemiological Data Differences between Gel-purified vs. DNA-purified Oral Polio Vaccine in environmental samples
Abstract
Background
As wild poliovirus is eradicated, preventing circulation of vaccine-derived poliovirus is top priority. Our ...
GW24-e1356 The histocompatibility of angiotensin converting enzyme does not promote its function on inhibitory to negative ventricular remodelling
GW24-e1356 The histocompatibility of angiotensin converting enzyme does not promote its function on inhibitory to negative ventricular remodelling
Objectives
Renin-angiontensin-aldosterone system (RAAS) is widely evidenced its point on inhibiting ventricular remodelling post myocardial infarction. The increa...
Evaluation of left ventricular and left atrial volumetric function from native MR multislice 4D flow magnitude data
Evaluation of left ventricular and left atrial volumetric function from native MR multislice 4D flow magnitude data
Abstract
Objectives
To assess the feasibility, precision, and accuracy of left ventricular (LV) and left atrial (LA) volumetric function evaluation ...
Simulation Study of In-Depth Gel Treatment in Heterogeneous Reservoirs with Sensitivity Analyses
Simulation Study of In-Depth Gel Treatment in Heterogeneous Reservoirs with Sensitivity Analyses
Abstract
In-depth gel treatment has become an attractive and optimum technology for remedying any problems that cause poor sweep efficiency, such as heterogeneity of...
Nanogold and nanosilver hybrid polymer materials
Nanogold and nanosilver hybrid polymer materials
<p>Significant opportunities exist in both the scientific and industrial sectors for the development of new generation hybrid materials. These multifunctional hybrid material...
Controlling Undesirable Water by Applying a Composite of Nanosheet and Viscoelastic-Surfactant Based Foamed Gel
Controlling Undesirable Water by Applying a Composite of Nanosheet and Viscoelastic-Surfactant Based Foamed Gel
Abstract
Excessive water production is one of the significant phenomena of reservoirs worldwide that influence oil production and costs. At the same time, a comprehe...
Understanding the Plugging Performance of HPAM-Cr (III) Polymer Gel for CO2 Conformance Control
Understanding the Plugging Performance of HPAM-Cr (III) Polymer Gel for CO2 Conformance Control
SummaryWith the demand for conformance control in carbon dioxide (CO2) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields fo...
A Novel Robust Polymer Gels for Water Shutoff Application in Sandstone Reservoir
A Novel Robust Polymer Gels for Water Shutoff Application in Sandstone Reservoir
Abstract
Polymer gels is an effective method for water shut-off (WSO) application in sandstone oil reservoirs having high water cuts. WSO application can extend the ...

