Javascript must be enabled to continue!
Chapter 36: Carlin-Type Gold Deposits in Nevada: Geologic Characteristics, Critical Processes, and Exploration
View through CrossRef
Abstract
Carlin-type gold deposits in Nevada account for ~5% of worldwide annual gold production, typically about ~135 metric tons (t) (~4.5 Moz) per year. They are hydrothermal epigenetic replacement bodies hosted predominantly in carbonate-bearing sedimentary rocks. They are known for their “invisible” gold that occurs in the crystal structure of pyrite. Over 95% of the production from these deposits is from four clusters of deposits, which include the Carlin trend and the Cortez, Getchell, and Jerritt Canyon camps. Despite differences in the local geologic settings, the characteristics of the deposits are very similar in the four clusters. Shared characteristics include: (1) alteration characterized by carbonate dissolution, silicate argillization, and silicification; (2) ore formation characterized by auriferous arsensian pyrite, typically as rims on preore pyrite, followed by late open-space deposition of orpiment, realgar, stibnite, and other minerals; (3) Ag/Au ratios of <1 in ore; (4) an As-Hg-Sb-Tl geochemical signature; (5) low temperatures (~160°–240°C) and salinities of ore fluids (~1–6 wt % NaCl equiv) and fairly shallow depths of formation (<~2–3 km); and (6) lack of mineral and elemental zoning around ore.
The four clusters share regional geologic controls related to formation as follows: (1) along the rifted margin of a craton, (2) within the slope facies of a passive margin sequence dominated by carbonates, (3) in the lower plate of a regional thrust fault, and (4) during a narrow time interval in the late Eocene (~42–34 Ma). The geometries and ore controls of the deposits in the four clusters are also very similar. At the deposit scale, ore and hydrothermal alteration are commonly associated with high-angle faults and preore low-angle contractional structures, including thrust faults and folds. The high-angle faults acted as fluid pathways for upwelling ore fluids, which were then diverted into lower angle favorable strata and contractional structures, where fluid-rock interaction led to replacement of carbonate and formation of ore. Rheologic contrasts between lithologies were also critical in diverting fluids into wall rocks. Common rheologic contrasts include contacts between thin- and thick-bedded lithologic units and the margins of contact metamorphic aureoles associated with Mesozoic intrusions.
The similarities suggest common processes. Four critical processes are apparent: (1) development of source(s) for gold and other critical components of the ore fluids, (2) formation of fluid pathways, (3) water-rock interaction and gold deposition, and (4) a tectonic trigger, which was renewal of magmatism and a change from contraction to extension in the late Eocene. Consensus exists on these processes, except for the source of gold and other components of the ore fluid, with most models calling upon either a magmatic-hydrothermal source or a crustal source, where metals were scavenged by either meteoric or metamorphic fluids. Future research should focus on Carlin-style deposits in Nevada that exhibit epithermal characteristics and deposits that appear to have a clear genetic association with magmatic-hydrothermal systems associated with upper crustal intrusions. Rather than discrete types of ore deposits, there may be continua between Carlin-type gold deposits, epithermal deposits, and distal disseminated deposits, with the four large camps representing an end member.
Society of Economic Geologists
Title: Chapter 36: Carlin-Type Gold Deposits in Nevada: Geologic Characteristics, Critical Processes, and Exploration
Description:
Abstract
Carlin-type gold deposits in Nevada account for ~5% of worldwide annual gold production, typically about ~135 metric tons (t) (~4.
5 Moz) per year.
They are hydrothermal epigenetic replacement bodies hosted predominantly in carbonate-bearing sedimentary rocks.
They are known for their “invisible” gold that occurs in the crystal structure of pyrite.
Over 95% of the production from these deposits is from four clusters of deposits, which include the Carlin trend and the Cortez, Getchell, and Jerritt Canyon camps.
Despite differences in the local geologic settings, the characteristics of the deposits are very similar in the four clusters.
Shared characteristics include: (1) alteration characterized by carbonate dissolution, silicate argillization, and silicification; (2) ore formation characterized by auriferous arsensian pyrite, typically as rims on preore pyrite, followed by late open-space deposition of orpiment, realgar, stibnite, and other minerals; (3) Ag/Au ratios of <1 in ore; (4) an As-Hg-Sb-Tl geochemical signature; (5) low temperatures (~160°–240°C) and salinities of ore fluids (~1–6 wt % NaCl equiv) and fairly shallow depths of formation (<~2–3 km); and (6) lack of mineral and elemental zoning around ore.
The four clusters share regional geologic controls related to formation as follows: (1) along the rifted margin of a craton, (2) within the slope facies of a passive margin sequence dominated by carbonates, (3) in the lower plate of a regional thrust fault, and (4) during a narrow time interval in the late Eocene (~42–34 Ma).
The geometries and ore controls of the deposits in the four clusters are also very similar.
At the deposit scale, ore and hydrothermal alteration are commonly associated with high-angle faults and preore low-angle contractional structures, including thrust faults and folds.
The high-angle faults acted as fluid pathways for upwelling ore fluids, which were then diverted into lower angle favorable strata and contractional structures, where fluid-rock interaction led to replacement of carbonate and formation of ore.
Rheologic contrasts between lithologies were also critical in diverting fluids into wall rocks.
Common rheologic contrasts include contacts between thin- and thick-bedded lithologic units and the margins of contact metamorphic aureoles associated with Mesozoic intrusions.
The similarities suggest common processes.
Four critical processes are apparent: (1) development of source(s) for gold and other critical components of the ore fluids, (2) formation of fluid pathways, (3) water-rock interaction and gold deposition, and (4) a tectonic trigger, which was renewal of magmatism and a change from contraction to extension in the late Eocene.
Consensus exists on these processes, except for the source of gold and other components of the ore fluid, with most models calling upon either a magmatic-hydrothermal source or a crustal source, where metals were scavenged by either meteoric or metamorphic fluids.
Future research should focus on Carlin-style deposits in Nevada that exhibit epithermal characteristics and deposits that appear to have a clear genetic association with magmatic-hydrothermal systems associated with upper crustal intrusions.
Rather than discrete types of ore deposits, there may be continua between Carlin-type gold deposits, epithermal deposits, and distal disseminated deposits, with the four large camps representing an end member.
Related Results
A Preliminary Review of Metallogenic Regularity of Gold Deposits in China
A Preliminary Review of Metallogenic Regularity of Gold Deposits in China
AbstractGold is one of the most important mineral resources in China with its rich mineral resources. In recent years, significant progress has been made on the process of gold res...
Insights from atom probe tomography into Carlin type gold mineralization
Insights from atom probe tomography into Carlin type gold mineralization
<div>
<p>Carlin-type gold (CTG) mineralization is one the best studied, yet poorly understood gold mineralization styles in the world. These deposits oc...
Geologic Modeling And Visualization Facilitates The Transition From Exploration To Development
Geologic Modeling And Visualization Facilitates The Transition From Exploration To Development
Abstract
The development of interactive modeling tools and better integration of seismic and geology allow 3D geologic modeling to play a significant, new role in...
Metallogenic Mechanism of Carlin-Type Gold Deposit in Zhen’an-Xunyang Basin, in the South Qinling of China: Constraints of In Situ Trace Elements and S Isotopes from Newly Discovered Wangzhuang Gold Deposit
Metallogenic Mechanism of Carlin-Type Gold Deposit in Zhen’an-Xunyang Basin, in the South Qinling of China: Constraints of In Situ Trace Elements and S Isotopes from Newly Discovered Wangzhuang Gold Deposit
The Zhen’an-Xunyang Basin is a late Paleozoic rifted basin with a series of Au-Hg-Sb deposits that have been found, mostly along the Nanyangshan fault. Recently discovered large- a...
Timing of Rhyolite Intrusion and Carlin-Type Gold Mineralization at the Cortez Hills Carlin-Type Deposit, Nevada, USA
Timing of Rhyolite Intrusion and Carlin-Type Gold Mineralization at the Cortez Hills Carlin-Type Deposit, Nevada, USA
AbstractCarlin-type gold deposits (CTDs) of Nevada are the largest producers of gold in the United States, a leader in world gold production. Although much has been resolved about ...
Outlier ice deposits at the poles of Mars as young climate records
Outlier ice deposits at the poles of Mars as young climate records
Introduction: The Polar Layered Deposits (PLDs) at the poles of Mars are believed to preserve a paleoclimate record that reflects the climate at the time of their formation [1]. Du...
Geology of Seattle and the Seattle area, Washington
Geology of Seattle and the Seattle area, Washington
Abstract
The city of Seattle, Washington State, lies within the Puget Sound Lowland, an elongate structural and topographic basin between the Cascade Range and Olymp...
Geochemical Exploration of the Carlin Trend
Geochemical Exploration of the Carlin Trend
Abstract
Geochemical exploration has always been a key to Newmont's success in gold exploration on the Carlin Trend. In the early 1960's, Newmont geologists John Liv...

