Javascript must be enabled to continue!
Analysis of metamorphism and tendency of coal seams and their hazardous properties
View through CrossRef
The object of this study is coals of different stages of metamorphism. Currently, a situation has arisen when indicators developed to establish the consumer qualities of coal are used to predict the manifestation of hazardous properties of mine seams during mining operations. The need to consider the fuel for its working condition is due to different end goals between the establishment of consumer qualities of coal and the manifestation of the hazardous properties of mine seams. The condition and quality of coal after its preparation for use is significantly different from the condition in the mining area. Appropriate sample preparation changes the physical and chemical properties of coals, which determine the manifestation of the hazardous properties of mine layers during mining. To eliminate such a discrepancy, the quality indicators of coals were recalculated for their working condition, taking into account the yield of ash and moisture content for the mined mine seams, followed by an analysis of changes in the correlations be-tween the indicators. The indicators of the manifestation of the hazardous proper-ties of mine layers are borrowed from the characteristics of the quality of the fuel, reduced to a dry, ash-free state. Using these indicators, additional errors are introduced in advance into the accuracy of the prediction of the manifestation of hazardous properties during mining operations. The values of the indicators of the organic (combustible) part of the fuel serve as general reliable characteristics of its quality for the entire set of mine seams, but they cannot be used to predict the hazardous properties of a particular mine seam due to a decrease in the accuracy of their determination due to the unpredictable content of mineral impurities and moisture. The initial experimental data, which have been accumulated over several decades based on the experience of using coal for industrial purposes, are analyzed. On the basis of the conducted researches the peculiarities of the choice of indicators of metamorphic transformations of coal, which are used in parallel respectively to establish the quality of fuel and forecast the dangerous properties of coal seams, have been established. The discrepancies between the indicators of the degree of metamorphism used in the current regulatory framework for the safe conduct of mining operations, the state of fuel during mining operations in underground conditions.
Private Company Technology Center
Title: Analysis of metamorphism and tendency of coal seams and their hazardous properties
Description:
The object of this study is coals of different stages of metamorphism.
Currently, a situation has arisen when indicators developed to establish the consumer qualities of coal are used to predict the manifestation of hazardous properties of mine seams during mining operations.
The need to consider the fuel for its working condition is due to different end goals between the establishment of consumer qualities of coal and the manifestation of the hazardous properties of mine seams.
The condition and quality of coal after its preparation for use is significantly different from the condition in the mining area.
Appropriate sample preparation changes the physical and chemical properties of coals, which determine the manifestation of the hazardous properties of mine layers during mining.
To eliminate such a discrepancy, the quality indicators of coals were recalculated for their working condition, taking into account the yield of ash and moisture content for the mined mine seams, followed by an analysis of changes in the correlations be-tween the indicators.
The indicators of the manifestation of the hazardous proper-ties of mine layers are borrowed from the characteristics of the quality of the fuel, reduced to a dry, ash-free state.
Using these indicators, additional errors are introduced in advance into the accuracy of the prediction of the manifestation of hazardous properties during mining operations.
The values of the indicators of the organic (combustible) part of the fuel serve as general reliable characteristics of its quality for the entire set of mine seams, but they cannot be used to predict the hazardous properties of a particular mine seam due to a decrease in the accuracy of their determination due to the unpredictable content of mineral impurities and moisture.
The initial experimental data, which have been accumulated over several decades based on the experience of using coal for industrial purposes, are analyzed.
On the basis of the conducted researches the peculiarities of the choice of indicators of metamorphic transformations of coal, which are used in parallel respectively to establish the quality of fuel and forecast the dangerous properties of coal seams, have been established.
The discrepancies between the indicators of the degree of metamorphism used in the current regulatory framework for the safe conduct of mining operations, the state of fuel during mining operations in underground conditions.
Related Results
INFLUENCE OF ANALYSIS RESULTS OF ANALYTICAL COAL SAMPLES ON THE PREDICTION ACCURACY OF HAZARDOUS PROPERTIES OF COAL SEAMS
INFLUENCE OF ANALYSIS RESULTS OF ANALYTICAL COAL SAMPLES ON THE PREDICTION ACCURACY OF HAZARDOUS PROPERTIES OF COAL SEAMS
Purpose: to establish possible quantitative errors in determining the values of some indicators of the degree of metamorphism without attracting the content of total moisture and m...
On determining coal classification indicators for establishing dangerous properties of mines
On determining coal classification indicators for establishing dangerous properties of mines
Currently, more than 20 qualification indicators are known by which degree of metamorphic coal transformations are established. Most of these indicators are designed for determinin...
Moisture as an indicator of the manifestation of hazardous properties of coal seams
Moisture as an indicator of the manifestation of hazardous properties of coal seams
Purpose: establish the change in the ratios between individual types of moisture and indicators of metamorphic transformations of coal seams after recalculating their values for th...
SCIENTIFIC BASIS FOR THE DEVELOPMENT OF A METHOD FOR FORECASTING THE HAZARDOUS PROPERTIES OF COAL SEAMS
SCIENTIFIC BASIS FOR THE DEVELOPMENT OF A METHOD FOR FORECASTING THE HAZARDOUS PROPERTIES OF COAL SEAMS
Purpose: to develop a method of coal gradation to predict the hazardous properties of coal seams during mining. Methodology: based on the study of the interdependence between indi...
ON THE INFLUENCE OF MINERAL IMPURITIES ON THE MANIFESTATION OF DANGEROUS PROPERTIES OF COAL SEAMS
ON THE INFLUENCE OF MINERAL IMPURITIES ON THE MANIFESTATION OF DANGEROUS PROPERTIES OF COAL SEAMS
Purpose: to establish a possible correspondence between metamorphic processes with artificial thermal destruction of coals and their ashing in order to identify the components of m...
MAIN COMPONENTS OF FOSSIL COALS, THEIR CONSUMER QUALITIES AND HAZARDOUS PROPERTIES OF COAL SEAMS
MAIN COMPONENTS OF FOSSIL COALS, THEIR CONSUMER QUALITIES AND HAZARDOUS PROPERTIES OF COAL SEAMS
Purpose: the goal is to more fully disclose the essence of the geological processes of coal formation and improve the regulatory framework for the safe conduct of mining operations...
The CO2 storage in coal seams at the influence of coal fines migration
The CO2 storage in coal seams at the influence of coal fines migration
Abstract: the pressure of the coal seam decays to a certain value due to the production of CH4, the production wells are switched to CO2 injection wells. The injection of CO2 can i...

