Javascript must be enabled to continue!
Large-eddy simulation analysis of knock in a direct injection spark ignition engine
View through CrossRef
Downsized spark ignition engines running under high loads have become more and more attractive for car manufacturers because of their increased thermal efficiency and lower CO
2
emissions. However, the occurrence of abnormal combustions promoted by the thermodynamic conditions encountered in such engines limits their practical operating range, especially in high efficiency and low fuel consumption regions. One of the main abnormal combustion is knock, which corresponds to an auto-ignition of end gases during the flame propagation initiated by the spark plug. Knock generates pressure waves which can have long-term damages on the engine, that is why the aim for car manufacturers is to better understand and predict knock appearance. However, an experimental study of such recurrent but non-cyclic phenomena is very complex, and these difficulties motivate the use of computational fluid dynamics for better understanding them. In the present article, large-eddy simulation (LES) is used as it is able to represent the instantaneous engine behavior and thus to quantitatively capture cyclic variability and knock. The proposed study focuses on the large-eddy simulation analysis of knock for a direct injection spark ignition engine. A spark timing sweep available in the experimental database is simulated, and 15 LES cycles were performed for each spark timing. Wall temperatures, which are a first-order parameter for knock prediction, are obtained using a conjugate heat transfer study. Present work points out that LES is able to describe the in-cylinder pressure envelope whatever the spark timing, even if the sample of LES cycles is limited compared to the 500 cycles recorded in the engine test bench. The influence of direct injection and equivalence ratio stratifications on combustion is also (MAPO) analyzed. Finally, focusing on knock, a Maximum Amplitude Pressure Oscillation analysis (MAPO) is conducted for both experimental and numerical pressure traces pointing out that LES well reproduces experimental knock tendencies.
Title: Large-eddy simulation analysis of knock in a direct injection spark ignition engine
Description:
Downsized spark ignition engines running under high loads have become more and more attractive for car manufacturers because of their increased thermal efficiency and lower CO
2
emissions.
However, the occurrence of abnormal combustions promoted by the thermodynamic conditions encountered in such engines limits their practical operating range, especially in high efficiency and low fuel consumption regions.
One of the main abnormal combustion is knock, which corresponds to an auto-ignition of end gases during the flame propagation initiated by the spark plug.
Knock generates pressure waves which can have long-term damages on the engine, that is why the aim for car manufacturers is to better understand and predict knock appearance.
However, an experimental study of such recurrent but non-cyclic phenomena is very complex, and these difficulties motivate the use of computational fluid dynamics for better understanding them.
In the present article, large-eddy simulation (LES) is used as it is able to represent the instantaneous engine behavior and thus to quantitatively capture cyclic variability and knock.
The proposed study focuses on the large-eddy simulation analysis of knock for a direct injection spark ignition engine.
A spark timing sweep available in the experimental database is simulated, and 15 LES cycles were performed for each spark timing.
Wall temperatures, which are a first-order parameter for knock prediction, are obtained using a conjugate heat transfer study.
Present work points out that LES is able to describe the in-cylinder pressure envelope whatever the spark timing, even if the sample of LES cycles is limited compared to the 500 cycles recorded in the engine test bench.
The influence of direct injection and equivalence ratio stratifications on combustion is also (MAPO) analyzed.
Finally, focusing on knock, a Maximum Amplitude Pressure Oscillation analysis (MAPO) is conducted for both experimental and numerical pressure traces pointing out that LES well reproduces experimental knock tendencies.
Related Results
Innovative developments in the field of intensification of fuel-air mixtures ignition
Innovative developments in the field of intensification of fuel-air mixtures ignition
The article discusses the intensification of fuel-air mixtures ignition in internal combustion engines with positive ignition. The conditions of operation of the spark plug in the ...
Individual Cylinder Knock Detection Based on Ion Current Sensing: Correlation Analysis
Individual Cylinder Knock Detection Based on Ion Current Sensing: Correlation Analysis
This paper addresses issues related with the measurement, analysis and real-time control of knocking combustions in high-performance spark-ignition engines. In particular, the rela...
Low-cost eddy covariance: a case study of evapotranspiration over agroforestry in Germany
Low-cost eddy covariance: a case study of evapotranspiration over agroforestry in Germany
Abstract. Eddy covariance has evolved as the method of choice for measurements of the ecosystem-atmosphere exchange of water vapour, sensible heat and trace gases. Under ideal cond...
Pengaruh Penggunaan Busi Standar, Dan Busi Iridium Terhadap Daya Dan Torsi Pada MesinYamaha Force One
Pengaruh Penggunaan Busi Standar, Dan Busi Iridium Terhadap Daya Dan Torsi Pada MesinYamaha Force One
Abstract
A spark plug is a part of an internal combustion engine with an electrode tip in the combustion chamber. Spar...
Optical Measurement of Spark Deflection Inside a Pre-chamber for Spark-Ignition Engines
Optical Measurement of Spark Deflection Inside a Pre-chamber for Spark-Ignition Engines
<div class="section abstract"><div class="htmlview paragraph">The start of combustion in a spark-ignited engine is highly dependent upon the conditions between the two ...
The Performance and Emissions of the Turbocharged Always Lean Burn Spark Ignition (TC-ALSI) Engine
The Performance and Emissions of the Turbocharged Always Lean Burn Spark Ignition (TC-ALSI) Engine
<div class="section abstract"><div class="htmlview paragraph">This paper extends previous development of the ALSI concept, by investigating the performance delivered wi...
Knock Control on Small Four-Two-Wheeler Engines
Knock Control on Small Four-Two-Wheeler Engines
<div class="section abstract"><div class="htmlview paragraph">Today, knock control is part of standard automotive engine
management systems. The structure-borne noise o...
Description of Knock Limit in a CFR Engine: Effects of Engine Settings and Gas Quality
Description of Knock Limit in a CFR Engine: Effects of Engine Settings and Gas Quality
<div class="htmlview paragraph">Knock is a major technological constriction of natural gas spark ignition engines. Nowadays, it is widely accepted that knock is due to auto-i...

