Javascript must be enabled to continue!
Elastic Properties of Selected Vehicles
View through CrossRef
<div class="htmlview paragraph">Currently, there are very little data on the maximum crush experienced by vehicles during impact. Measurements of the maximum crush were made on selected vehicles to provide some insight on the amount of maximum crush during a collision and the extent of elastic rebound. Fourteen low speed barrier impacts were conducted at the Insurance Corporation of British Columbia and University of British Columbia (ICBC-UBC) test facility. In addition twelve measurements of maximum crush were obtained from Transport Canada high speed motion films of 30 mph impacts. To bolster the data, a paper by Hight provided thirty-three maximum crush measurements at impact speeds of 35 mph and one test at 40 mph. The combined data provided maximum crush information over a wide spectrum of impact speeds. The elastic crush which is the difference between maximum and residual crush was also determined.</div>
<div class="htmlview paragraph">The amount of elastic crush on vehicles and the variation of elastic crush with residual crush was examined. Also, the elastic crush was expressed as a ratio of residual crush to maximum crush to more clearly delineate trends. One vehicle model was isolated and tested over a wide range of impact speeds.</div>
Title: Elastic Properties of Selected Vehicles
Description:
<div class="htmlview paragraph">Currently, there are very little data on the maximum crush experienced by vehicles during impact.
Measurements of the maximum crush were made on selected vehicles to provide some insight on the amount of maximum crush during a collision and the extent of elastic rebound.
Fourteen low speed barrier impacts were conducted at the Insurance Corporation of British Columbia and University of British Columbia (ICBC-UBC) test facility.
In addition twelve measurements of maximum crush were obtained from Transport Canada high speed motion films of 30 mph impacts.
To bolster the data, a paper by Hight provided thirty-three maximum crush measurements at impact speeds of 35 mph and one test at 40 mph.
The combined data provided maximum crush information over a wide spectrum of impact speeds.
The elastic crush which is the difference between maximum and residual crush was also determined.
</div>
<div class="htmlview paragraph">The amount of elastic crush on vehicles and the variation of elastic crush with residual crush was examined.
Also, the elastic crush was expressed as a ratio of residual crush to maximum crush to more clearly delineate trends.
One vehicle model was isolated and tested over a wide range of impact speeds.
</div>.
Related Results
Electric versus conventional vehicles for logistics: A total cost of ownership
Electric versus conventional vehicles for logistics: A total cost of ownership
Today, different measures are investigated to solve the challenge of a sustainable urban freight transport. Among them, electric vehicles are often viewed as an interesting solutio...
Elastic Plastic Flexure on Icy Moons: Implications for heat flux
Elastic Plastic Flexure on Icy Moons: Implications for heat flux
Investigations of ice-shell flexure, as observed from stereo-derived topographic profiles, have been commonly used to provide information on the interior structure and evolution of...
Elastic Attribute Generation From 3 Points Elastic Inversion
Elastic Attribute Generation From 3 Points Elastic Inversion
Abstract
The concept of Elastic Inversion (EI) has been generally accepted over the last few years in the exploration and production environment. EI reconstructs ...
Electrifying light commercial vehicles for city logistics? A total cost of ownership analysis
Electrifying light commercial vehicles for city logistics? A total cost of ownership analysis
Different measures are considered by the authorities to tackle the negative impacts of city logistics. Among them, battery electric vehicles are seen as a promising solution, but h...
Difference in force decay latex and non-latex elastic band based on duration of elastic use and salivary pH concentration: In vitro study
Difference in force decay latex and non-latex elastic band based on duration of elastic use and salivary pH concentration: In vitro study
OBJECTIVE:
This study aimed to determine the difference in force decay between latex and non-latex elastic bands based on duration of use and salivary pH concentration....
UNDERSTANDING CONSUMERS INTENTION TO PURCHASE GREEN VEHICLE: A LITERATURE REVIEW
UNDERSTANDING CONSUMERS INTENTION TO PURCHASE GREEN VEHICLE: A LITERATURE REVIEW
Global warming is one of the main issues discuss by nations leaders. It is a crucial problem that needs to be address immediately. One of the solutions to global warming is green v...
DIRECTIONS OF DEVELOPING DESIGN SCHEMES AND CALCULATIONS OF ELASTIC COUPLINGS
DIRECTIONS OF DEVELOPING DESIGN SCHEMES AND CALCULATIONS OF ELASTIC COUPLINGS
A large number of elastic couplings are used in mechanical engineering. Couplings with metal elastic elements come with constant and variable stiffness. As part of drives, they can...
Photo-elastic Effect Features Used for Measuring Laser Radiation Parameters
Photo-elastic Effect Features Used for Measuring Laser Radiation Parameters
The article discusses the photo-elastic effect features in acousto-optic processors for processing pulse signals on the time axis. The photo-elastic interaction in these devices is...

